67 Camaro Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7dee2 · 01-27-2018, 11:33 AM

No but, Tada we do have a cart/jiggy dealio!

Credit for this design goes to a YouTuber, MrFireman164 and his 68 Camaro build, liked his design the best of what I could find out there. It’s probably overkill but it’ll hold the car from moving really, really well and can be transported for paint, etc. when the time comes.

gringoloco · 01-27-2018, 09:00 PM

Very, very nice

**mongocanfly** · 01-27-2018, 10:44 PM

that turned out good....

7dee2 · 01-28-2018, 03:34 PM

Thanks guys, it's the shiz compared to what we had!

**Dieselwrencher** · 01-29-2018, 07:36 PM

Nice work!

7dee2 · 02-02-2018, 09:19 AM

Thanks Ryan!

Parts, parts and more parts, gotta whole lotta Camaro going on!

7dee2 · 02-07-2018, 10:54 AM

Here’s a small victory, our car didn’t have any keys when we bought it so how to get the ignition switch out without mucking it all up? Found the door and trunk cylinders while going through all the parts boxes. Took those to the local locksmith and had keys cut from the codes on the cylinders. At first it looked like someone might have broken the key off in the cylinder? It was just really full of debris and 30 minutes later it was out, yes!

gringoloco · 02-07-2018, 12:21 PM

That’s a win!

**Dieselwrencher** · 02-07-2018, 08:24 PM

Very nice. That definitely is a plus!

Lokin4AReason · 03-16-2019, 01:26 PM

like that jig build ....

any update(s) ... ?

**rgunlock** · 03-16-2019, 03:33 PM

I was thinking just the other day that I hadn't seen any updates on your builds for quite some time. Hope you are doing ok and life just has you busy.

7dee2 · 04-02-2019, 11:42 AM

Quote:

Originally Posted by Lokin4AReason

like that jig build ....

any update(s) ... ?

Thanks Lokin4AReason, I'm pretty happy with the jig and really do need to update this build thread.

Quote:

Originally Posted by rgunlock

I was thinking just the other day that I hadn't seen any updates on your builds for quite some time. Hope you are doing ok and life just has you busy.

Hey Rick, I’m guessing folks thought we gave up on this project, oh no just really, really sidetracked. Wow, it's been over a year?

After the jig was finished I started into the right rocker area. This does appear to be where the previous shop or previous owner left off. Looks like while they were welding in the right floor section, they got some blow through at the inner rocker. And that led them to open up the rocker and weld in a patch to finish the floor install.

7dee2 · 04-03-2019, 11:04 AM

After a closer inspection and some detailed measurements, decided to cut out some more of the inner rocker/lower a-pillar support, etc. I’m not very happy with this area at this point, the more I dig the more soft rusted metal I’m finding.

Got in some new parts and that’s where things stalled kind of?

**Dieselwrencher** · 04-11-2019, 06:56 PM

Nice to see you back around Brett. That stinks to see the rust but it looks like you're on your way to making it right again.

7dee2 · 04-16-2019, 10:16 AM

Thank's Ryan, Yep that was my plan but then…..

So last February, oops make that 2 Februarys ago I was scratching my head telling myself, self you should get a reproduction body for this project!

After researching both Dynacorn & Real Deal Steel we placed an order with Joe Whitaker at Real Deal Steel https://realdealsteel.com. Our order was for a 67 Camaro coupe body with factory heater and the mini tub option.

**mongocanfly** · 04-16-2019, 11:31 AM

New body? Nice!!!...

gringoloco · 04-16-2019, 05:56 PM

Ooooohhh, this just got very interesting. When do you take delivery?

**Dieselwrencher** · 04-17-2019, 04:49 PM

Cheater!!! Haha Don't toss the old one away.

7dee2 · 04-22-2019, 11:20 AM

Quote:

Originally Posted by mongocanfly

New body? Nice!!!...

Thanks, I’m stoked!

Quote:

Originally Posted by gringoloco

Ooooohhh, this just got very interesting. When do you take delivery?

We’ve had the shell since last October, it’s got a pretty crazy delivery story I’ll share coming up.

Quote:

Originally Posted by Dieselwrencher

Cheater!!! Haha Don't toss the old one away.

Yeah buddy!

Here’s some pics of our car at their facility.

**mongocanfly** · 04-22-2019, 11:36 AM

Wow...extremely nice...

**rgunlock** · 04-22-2019, 12:19 PM

Very nice Brett! That's going to make this an easy build. Looking forward to assembly updates.

gringoloco · 04-22-2019, 02:10 PM

Oh no, there’s always drama. I’m watching this intently as I’ve always been curious as to how much time is actually saved going this route. The pricing certainly makes it tempting

Overdriven · 04-23-2019, 12:20 AM

When I saw the “old” body on the dolly I got flashbacks to my old 67 Camaro. I made a similar dolly using “pins” in the same holes the factory used on the assembly line to transport the bodies. Never had an issue with the body moving on the dolly but the spring shackle attachment point is a good idea. I cringed when I saw the rocker area pics, and again when it was all opened up. More flashbacks of not so fond memories involving patching, reinforcing, etc.

As much as I love metal work, rust repair isn’t as fun and a new body is so nice too work with. Plus you don’t have an excuse not to get back on it now!

7dee2 · 04-24-2019, 10:02 AM

Quote:

Originally Posted by mongocanfly

Wow...extremely nice...

Thanks Greg, these guys do really good work!

Quote:

Originally Posted by rgunlock

Very nice Brett! That's going to make this an easy build. Looking forward to assembly updates.

Thanks Rick, we’re definitely spoiling ourselves on this one.

Quote:

Originally Posted by gringoloco

Oh no, there’s always drama. I’m watching this intently as I’ve always been curious as to how much time is actually saved going this route. The pricing certainly makes it tempting

You know I really don’t see how it couldn’t be a time saver and in our case with all of our life distractions this last year (ongoing)!

Quote:

Originally Posted by Overdriven

When I saw the “old” body on the dolly I got flashbacks to my old 67 Camaro. I made a similar dolly using “pins” in the same holes the factory used on the assembly line to transport the bodies. Never had an issue with the body moving on the dolly but the spring shackle attachment point is a good idea. I cringed when I saw the rocker area pics, and again when it was all opened up. More flashbacks of not so fond memories involving patching, reinforcing, etc.

As much as I love metal work, rust repair isn’t as fun and a new body is so nice too work with. Plus you don’t have an excuse not to get back on it now!

No excuses!

While we were waiting for the new Camaro body to be built (6+ long months) started thinking do we need a second cart/jig or maybe? A rotisserie, that’s a tool I’ve always wanted and could be useful for a few things including transporting the new or old Camaro body. Oh yes, time for a Whirly Jig with their transporter kit.

**mongocanfly** · 04-24-2019, 11:56 AM

oh yeah...youll wonder how you ever got by without a rotisserie...sure makes life easy

01-27-2018, 11:33 AM	#51
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,960	Re: 67 Camaro Build No but, Tada we do have a cart/jiggy dealio! Credit for this design goes to a YouTuber, MrFireman164 and his 68 Camaro build, liked his design the best of what I could find out there. It’s probably overkill but it’ll hold the car from moving really, really well and can be transported for paint, etc. when the time comes. Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 Last edited by 7dee2; 01-30-2018 at 10:30 AM.

01-27-2018, 09:00 PM	#52
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 Camaro Build Very, very nice __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-27-2018, 10:44 PM	#53
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,662	Re: 67 Camaro Build that turned out good.... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-28-2018, 03:34 PM	#54
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,960	Re: 67 Camaro Build Thanks guys, it's the shiz compared to what we had! __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-29-2018, 07:36 PM	#55
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build Nice work! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-02-2018, 09:19 AM	#56
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,960	Re: 67 Camaro Build Thanks Ryan! Parts, parts and more parts, gotta whole lotta Camaro going on! Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

02-07-2018, 10:54 AM	#57
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,960	Re: 67 Camaro Build Here’s a small victory, our car didn’t have any keys when we bought it so how to get the ignition switch out without mucking it all up? Found the door and trunk cylinders while going through all the parts boxes. Took those to the local locksmith and had keys cut from the codes on the cylinders. At first it looked like someone might have broken the key off in the cylinder? It was just really full of debris and 30 minutes later it was out, yes! Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

02-07-2018, 12:21 PM	#58
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 Camaro Build That’s a win! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-07-2018, 08:24 PM	#59
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build Very nice. That definitely is a plus! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-16-2019, 01:26 PM	#60
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 969	Re: 67 Camaro Build like that jig build .... any update(s) ... ? __________________ dont want to hear excuses, i want to hear solution(s)

03-16-2019, 03:33 PM	#61
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Re: 67 Camaro Build I was thinking just the other day that I hadn't seen any updates on your builds for quite some time. Hope you are doing ok and life just has you busy. __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500

04-03-2019, 11:04 AM	#63
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,960	Re: 67 Camaro Build After a closer inspection and some detailed measurements, decided to cut out some more of the inner rocker/lower a-pillar support, etc. I’m not very happy with this area at this point, the more I dig the more soft rusted metal I’m finding. Got in some new parts and that’s where things stalled kind of? Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 Last edited by 7dee2; 04-03-2019 at 11:35 AM.

04-11-2019, 06:56 PM	#64
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build Nice to see you back around Brett. That stinks to see the rust but it looks like you're on your way to making it right again. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-16-2019, 10:16 AM	#65
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,960	Re: 67 Camaro Build Thank's Ryan, Yep that was my plan but then….. So last February, oops make that 2 Februarys ago I was scratching my head telling myself, self you should get a reproduction body for this project! After researching both Dynacorn & Real Deal Steel we placed an order with Joe Whitaker at Real Deal Steel https://realdealsteel.com. Our order was for a 67 Camaro coupe body with factory heater and the mini tub option. __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

04-16-2019, 11:31 AM	#66
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,662	Re: 67 Camaro Build New body? Nice!!!... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver



Register or Log In To remove these advertisements.

04-16-2019, 05:56 PM	#67
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 Camaro Build Ooooohhh, this just got very interesting. When do you take delivery? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-17-2019, 04:49 PM	#68
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build Cheater!!! Haha Don't toss the old one away. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-22-2019, 11:36 AM	#70
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,662	Re: 67 Camaro Build Wow...extremely nice... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-22-2019, 12:19 PM	#71
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Re: 67 Camaro Build Very nice Brett! That's going to make this an easy build. Looking forward to assembly updates. __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500

04-22-2019, 02:10 PM	#72
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 Camaro Build Oh no, there’s always drama. I’m watching this intently as I’ve always been curious as to how much time is actually saved going this route. The pricing certainly makes it tempting __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-23-2019, 12:20 AM	#73
Overdriven Registered User Join Date: Mar 2016 Location: Long Island NY Posts: 598	Re: 67 Camaro Build When I saw the “old” body on the dolly I got flashbacks to my old 67 Camaro. I made a similar dolly using “pins” in the same holes the factory used on the assembly line to transport the bodies. Never had an issue with the body moving on the dolly but the spring shackle attachment point is a good idea. I cringed when I saw the rocker area pics, and again when it was all opened up. More flashbacks of not so fond memories involving patching, reinforcing, etc. As much as I love metal work, rust repair isn’t as fun and a new body is so nice too work with. Plus you don’t have an excuse not to get back on it now!

04-24-2019, 11:56 AM	#75
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,662	Re: 67 Camaro Build oh yeah...youll wonder how you ever got by without a rotisserie...sure makes life easy __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

Register or Log In To remove these advertisements.