KS 1968-72 Restored Vent Windows in Black Trim - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMCHNE · 03-10-2020, 02:21 PM

Quote:

Originally Posted by RogerKoop

about 3-4 weeks. Do you need clear or tinted glass.

I need clear glass.

TIMCHNE · 04-05-2020, 08:04 PM

Are current conditions causing you any delays? Let me know the cost when you have a pair ready shipping to 83709. Thanks

**RogerKoop** · 04-08-2020, 09:36 PM

Quote:

Originally Posted by TIMCHNE

Are current conditions causing you any delays? Let me know the cost when you have a pair ready shipping to 83709. Thanks

I checked and the powder coastr is shut down. They may be open later this month.

fb111ewo · 05-12-2020, 09:10 PM

Do you have any sets of these available?

**RogerKoop** · 05-13-2020, 01:40 PM

Quote:

Originally Posted by fb111ewo

Do you have any sets of these available?

I have a chrome 1968-72 with clear glass.I will have 4 sets available in 2 weeks. Waiting on the chrome plater.

**truckdude239** · 05-13-2020, 01:54 PM

Wish i had the money for a set mine are in bad shape and im not brave enough to try taking them apart to rebubber them

**BIG ORANGE** · 05-13-2020, 01:54 PM

Roger can chrome vent window's be redone in black if I had some good core's?
I got a super nice set of chrome ones but doing a color change on my blazer and going all black instead of chrome.
Thanxs

**RogerKoop** · 05-13-2020, 08:51 PM

Quote:

Originally Posted by BIG ORANGE

Roger can chrome vent window's be redone in black if I had some good core's?
I got a super nice set of chrome ones but doing a color change on my blazer and going all black instead of chrome.
Thanxs

I'll check with my powder coater. It possible the chrome will need to be stripped

fb111ewo · 05-13-2020, 08:57 PM

Hi Roger, I'm looking for a black set as well. My truck is going to be more of a plane jane, and I think the chrome would stick out too much.

**RogerKoop** · 05-13-2020, 09:02 PM

Quote:

Originally Posted by fb111ewo

Hi Roger, I'm looking for a black set as well. My truck is going to be more of a plane jane, and I think the chrome would stick out too much.

I just got several sets back from the powder coater. Do you clear or tinited glass?

fb111ewo · 05-13-2020, 09:15 PM

Clear glass is what I would need. Thanks!

**RogerKoop** · 07-05-2020, 05:40 PM

I'm working on another 2 pair. Just let me know tinted or clear glass

flashed · 07-05-2020, 10:50 PM

I need a Black set shipped to Ga 30114 , let me know when you have some available with clear glass and I will mail a check or money order , your choice .

**RogerKoop** · 07-06-2020, 02:38 PM

Quote:

Originally Posted by flashed

I need a Black set shipped to Ga 30114 , let me know when you have some available with clear glass and I will mail a check or money order , your choice .

I will do them in clear glass.

PM sent

**A1971Blazer** · 08-06-2020, 01:01 PM

Do you have any for '67? chrome or black either one
and what is the difference in them and the 68-72?

**RogerKoop** · 08-07-2020, 10:51 AM

Quote:

Originally Posted by A1971Blazer

Do you have any for '67? chrome or black either one
and what is the difference in them and the 68-72?

I can do a 1967 set in black or chrome with tinted glass. I just dropped a set off at a new chrome plater yesterday and should have them back in about 2 weeks for another member. We'll see how they turn out.

As for is what different. The 1967 has frame around the glass with the pivot a post for the knob on it. 1968-72 the pivot was move the the glass.

**A1971Blazer** · 08-07-2020, 11:03 AM

Quote:

Originally Posted by RogerKoop

I can do a 1967 set in black or chrome with tinted glass. I just dropped a set off at a new chrome plater yesterday and should have them back in about 2 weeks for another member. We'll see how they turn out.

As for is what different. The 1967 has frame around the glass with the pivot a post for the knob on it. 1968-72 the pivot was move the the glass.

Thanks...I'll be following for pictures of the 67 ones when you get them back
I'm interested in a set or perhaps betting mine restored

OL SKOOL · 08-08-2020, 09:41 AM

Do you have any chrome ready for a 70 with clear glass?

**RogerKoop** · 08-08-2020, 10:31 AM

Quote:

Originally Posted by OL SKOOL

Do you have any chrome ready for a 70 with clear glass?

All I have at this time is chrome with tinted glass. I'm checking another plating shop as the one I was using is shutting down. I’ll keep posted.

Rtairforce · 09-01-2020, 11:46 AM

How do I go about getting on the books for a set of black vent windows for a 72 Blazer? Shipping 29040.

**RogerKoop** · 09-01-2020, 02:10 PM

Quote:

Originally Posted by Rtairforce

How do I go about getting on the books for a set of black vent windows for a 72 Blazer? Shipping 29040.

I've got a set ready to assemble. Do you need tinted or clear glass? Shippint should run around $26.00-$29.00 .

Rtairforce · 09-01-2020, 02:25 PM

Clear glass, please.

**RogerKoop** · 09-01-2020, 06:26 PM

Quote:

Originally Posted by Rtairforce

Clear glass, please.

I'll start on them tomorrow.

Rtairforce · 09-01-2020, 06:45 PM

Copy, thank you

**RogerKoop** · 09-03-2020, 09:05 PM

Quote:

Originally Posted by Sandemonium

Roger,

What is the turn around time on a set of black soft Ray vent windows if I sent you mine?

My soft Ray glass looks good and doesn't appear to have any noticeable scratches. I would like the frames to be satin black, I'm not sure how glossy you normally have them powder coated.

Thank you,

Bob

I can reuse your glass. I usually do gloss black but I can do satin black.

Turnaround time is about 3 weeks once I get them.

04-05-2020, 08:04 PM	#52
TIMCHNE Registered User Join Date: Sep 2018 Location: Boise Idaho Posts: 39	Re: 1968-72 Restored Vent Windows in Black Trim Are current conditions causing you any delays? Let me know the cost when you have a pair ready shipping to 83709. Thanks __________________ 72 swb 4x4 dana 60 14 bolt ff nv4500 np205 66 SS Chevy II 67 Chevy II 2dr sedan

05-12-2020, 09:10 PM	#54
fb111ewo Registered User Join Date: Jun 2014 Location: Murfreesboro TN - originally from Missouri Posts: 140	Re: 1968-72 Restored Vent Windows in Black Trim Do you have any sets of these available?

05-13-2020, 01:54 PM	#56
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: 1968-72 Restored Vent Windows in Black Trim Wish i had the money for a set mine are in bad shape and im not brave enough to try taking them apart to rebubber them __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

05-13-2020, 01:54 PM	#57
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,754	Re: 1968-72 Restored Vent Windows in Black Trim Roger can chrome vent window's be redone in black if I had some good core's? I got a super nice set of chrome ones but doing a color change on my blazer and going all black instead of chrome. Thanxs __________________ Things happen for a reason!

05-13-2020, 08:57 PM	#59
fb111ewo Registered User Join Date: Jun 2014 Location: Murfreesboro TN - originally from Missouri Posts: 140	Re: 1968-72 Restored Vent Windows in Black Trim Hi Roger, I'm looking for a black set as well. My truck is going to be more of a plane jane, and I think the chrome would stick out too much.

05-13-2020, 09:15 PM	#61
fb111ewo Registered User Join Date: Jun 2014 Location: Murfreesboro TN - originally from Missouri Posts: 140	Re: 1968-72 Restored Vent Windows in Black Trim Clear glass is what I would need. Thanks!

07-05-2020, 05:40 PM	#62
RogerKoop Senior Member Join Date: Nov 2012 Location: Shawnee, KS Posts: 1,823	Re: 1968-72 Restored Vent Windows in Black Trim I'm working on another 2 pair. Just let me know tinted or clear glass __________________ Roger Koop

07-05-2020, 10:50 PM	#63
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 1968-72 Restored Vent Windows in Black Trim I need a Black set shipped to Ga 30114 , let me know when you have some available with clear glass and I will mail a check or money order , your choice .

08-06-2020, 01:01 PM	#65
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,186	Re: 1968-72 Restored Vent Windows in Black Trim Do you have any for '67? chrome or black either one and what is the difference in them and the 68-72? __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

08-08-2020, 09:41 AM	#68
OL SKOOL Registered User Join Date: Feb 2010 Location: rochelle il. Posts: 355	Re: 1968-72 Restored Vent Windows in Black Trim Do you have any chrome ready for a 70 with clear glass?

09-01-2020, 11:46 AM	#70
Rtairforce Registered User Join Date: Oct 2016 Location: Dalzell SC Posts: 4	Re: 1968-72 Restored Vent Windows in Black Trim How do I go about getting on the books for a set of black vent windows for a 72 Blazer? Shipping 29040.

09-01-2020, 02:25 PM	#72
Rtairforce Registered User Join Date: Oct 2016 Location: Dalzell SC Posts: 4	Re: 1968-72 Restored Vent Windows in Black Trim Clear glass, please.

09-01-2020, 06:45 PM	#74
Rtairforce Registered User Join Date: Oct 2016 Location: Dalzell SC Posts: 4	Re: 1968-72 Restored Vent Windows in Black Trim Copy, thank you



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.