AL Part out of 1967 Open Road Camper - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stormbear · 10-12-2014, 10:34 PM

Do you know if the rear is a HO-52 or HO72.Looking for a center section with 4:11 gears.Thanks Dave

**nlped** · 10-12-2014, 10:51 PM

Quote:

Originally Posted by stormbear

Do you know if the rear is a HO-52 or HO72.Looking for a center section with 4:11 gears.Thanks Dave

I'm honestly not sure what rearend it has under it, but it a newer one since it had disc brakes. I'll try to get some info on it in the next few days.

Thanks

**DaHos** · 10-12-2014, 10:55 PM

Quote:

Originally Posted by nlped

The fenders are in really good shape, but as you can see from the pics, the PO did drill a couple of holes in them for aftermarket trailer style parking lights

and the passenger one will have holes in it from the upright where the awning hardware is mounted...

I'd ship, but I have no idea how much shipping would run...

They are very solid with no visible rust, even in the super common passenger front cup.

$65 each?

In line for the pr pending shipping to 48912 Business or Greyhound.

jjzepplin · 10-13-2014, 07:07 AM

Quote:

Originally Posted by nlped

The radio is an aftermarket Pioneer 2-post radio...is that what you're wanting?

yup!

jjzepplin · 10-13-2014, 07:13 AM

Quote:

Originally Posted by jjzepplin

I'll take the radio pending price and model etc.33578 zip

This is the one.

Elliot949 · 10-13-2014, 07:17 AM

Man I would have liked the complete Truck/Camper

**nlped** · 10-13-2014, 08:29 AM

Quote:

Originally Posted by jjzepplin

This is the one.

Yeah, I knew you were first, I just wanted to clarify that you knew it wasn't an original piece. I'll pull it this afternoon and verify that it works, shoot some pictures if it does and get back to you.

**nlped** · 10-13-2014, 08:30 AM

Quote:

Originally Posted by DaHos

In line for the pr pending shipping to 48912 Business or Greyhound.

Ok

**nlped** · 10-13-2014, 08:32 AM

Quote:

Originally Posted by Elliot949

Man I would have liked the complete Truck/Camper

Me too, but after more investigation, the camper is pretty rotten and would take a ton of work and $$$ to get it to the level that would get my wife to spend the night in it...

. Priorities

EdSevered · 10-13-2014, 11:50 AM

Scanned posts...is gauge cluster still available? How much are you asking?

Thanks! -Ed

waylonbud · 10-13-2014, 01:06 PM

Is the cig lighter original 67? If so is it available or are you keeping in the cab to sell to person( sorry I dont remember who)that asked about price on cab.If it gets to me shipping is to 37303.

**nlped** · 10-13-2014, 07:34 PM

Quote:

Originally Posted by EdSevered

Scanned posts...is gauge cluster still available? How much are you asking?

Thanks! -Ed

Hey Ed

,

The guage cluster isn't even close to original. Are you interested in the Autometer guage cluster thats in it?

**nlped** · 10-13-2014, 07:35 PM

Quote:

Originally Posted by waylonbud

Is the cig lighter original 67? If so is it available or are you keeping in the cab to sell to person( sorry I dont remember who)that asked about price on cab.If it gets to me shipping is to 37303.

I don't have the original cigarette lighter "insert", but the original socket is still in the dash... Is that what you want?

**nlped** · 10-13-2014, 07:38 PM

Weather here is BAD!!!! I got a few minutes with Chubby, but that was to move it closer to my shop so I could run back and forth for tools, but between the torrential rain and the 60 mph winds... I didn't accomplish much. I will try to leave work early tomorrow so I can pull parts for the already sold pieces and the pieces people have asked about that I can get during the week.

**nlped** · 10-13-2014, 07:39 PM

Quote:

Originally Posted by Elliot949

Man I would have liked the complete Truck/Camper

It can be yours minus a few pieces...

**nlped** · 10-13-2014, 07:41 PM

Quote:

Originally Posted by jjzepplin

This is the one.

PM'ed you...

**nlped** · 10-13-2014, 07:49 PM

Quote:

Originally Posted by Blown06

I'll take it, figure shipping to 78611 and let me know a total and PayPal address.

Pm sent...

**nlped** · 10-13-2014, 07:50 PM

Quote:

Originally Posted by jabborabbo

Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801?

Thanks!

PM sent...

**nlped** · 10-13-2014, 07:51 PM

Radio is a Pioneer KEH5252 and it works. I did hook 12volts up and listened to it through the Blaupunkt speakers

**nlped** · 10-13-2014, 08:13 PM

Quote:

Originally Posted by Dirt's72

Sounds good. If you don't mind one more pic of the backside of it when you get it taken out. Also if you can get the defrost vents out without breaking the tabs let me know. Thank You.

I got the dash pad and defrost vents out without much issue...
All tabs intact...

Dirt's72 · 10-13-2014, 08:51 PM

Quote:

Originally Posted by nlped

I got the dash pad and defrost vents out without much issue...
All tabs intact...

Cool, looks great. Let me know what you need for the defrost vents and total shipping of all parts to my work address 87109, and also your PayPal address. Thank You.

**nlped** · 10-13-2014, 09:23 PM

Quote:

Originally Posted by Dirt's72

Cool, looks great. Let me know what you need for the defrost vents and total shipping of all parts to my work address 87109, and also your PayPal address. Thank You.

PM sent

EdSevered · 10-13-2014, 09:33 PM

Quote:

Originally Posted by nlped

Hey Ed

,

The guage cluster isn't even close to original. Are you interested in the Autometer guage cluster thats in it?

Hiya Ed, it depends on the price. I do kinda like the way the aftermarket gauges are mounted directly in the original bezel, despite not being original. My plans for my truck are leaning towards resto-mod/rod. So, not as concerned with stock look. I couLd probably use the tach harness, too, if it is in good shape. Maybe you could provide a few more pics. Thanks! -Ed.

bagged01extcab · 10-13-2014, 09:59 PM

Does it have the 67 specific ignition spacer? It looks like it in the pics. If so, how much shipped to 75602?

Thanks
Trey

**nlped** · 10-13-2014, 10:17 PM

Quote:

Originally Posted by bagged01extcab

Does it have the 67 specific ignition spacer? It looks like it in the pics. If so, how much shipped to 75602?

Thanks
Trey

Yes it does. $25

10-12-2014, 10:34 PM	#51
stormbear Registered User Join Date: May 2011 Location: Claryville NY Posts: 35	Re: Part out of 1967 Open Road Camper Do you know if the rear is a HO-52 or HO72.Looking for a center section with 4:11 gears.Thanks Dave

10-13-2014, 07:17 AM	#56
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: Part out of 1967 Open Road Camper Man I would have liked the complete Truck/Camper __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210

10-13-2014, 11:50 AM	#60
EdSevered Registered User Join Date: Oct 2013 Location: Wisconsin Posts: 162	Re: Part out of 1967 Open Road Camper Scanned posts...is gauge cluster still available? How much are you asking? Thanks! -Ed

10-13-2014, 01:06 PM	#61
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Part out of 1967 Open Road Camper Is the cig lighter original 67? If so is it available or are you keeping in the cab to sell to person( sorry I dont remember who)that asked about price on cab.If it gets to me shipping is to 37303.

10-13-2014, 07:38 PM	#64
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Part out of 1967 Open Road Camper Weather here is BAD!!!! I got a few minutes with Chubby, but that was to move it closer to my shop so I could run back and forth for tools, but between the torrential rain and the 60 mph winds... I didn't accomplish much. I will try to leave work early tomorrow so I can pull parts for the already sold pieces and the pieces people have asked about that I can get during the week. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-13-2014, 07:51 PM	#69
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Part out of 1967 Open Road Camper Radio is a Pioneer KEH5252 and it works. I did hook 12volts up and listened to it through the Blaupunkt speakers __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-13-2014, 09:59 PM	#74
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	Re: Part out of 1967 Open Road Camper Does it have the 67 specific ignition spacer? It looks like it in the pics. If so, how much shipped to 75602? Thanks Trey __________________ Trey Oney



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.