GEN III C10 Full Air ride build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

breeze85cten · 11-21-2010, 03:36 PM

I finally had enough time to finish the harness and route it to all the sensors and wire loom it! The engine harness is ready and just fired her up today for the first time!!! Sounds awesome with the big cam. Of course the video doesnt do it justice. At first I couldnt get oil pressure for the life of me so I went thought it might be the pick up tube being pinched but changed it and it wasnt it then went to my last resort which was change the oil pump but after I did that it still was the same no pressure! This whole time I was turning the engine over with the starter and no spark plugs to build pressure but it wasnt enought so I ended up pooring oil down the oil sensor hole and then went to actually start it and it had oil pressure within 3 seconds!! Thank god. So all I had to do was prime it through the oils sensor hole!! Hope you guys like it.

breeze85cten · 11-21-2010, 10:36 PM

hope video works its on you tube

breeze85cten · 11-21-2010, 10:40 PM

YouTube - '85 C10 Bagged LSX

menace121978 · 11-21-2010, 10:42 PM

music to my ears!! sounds and looks great man!

breeze85cten · 11-22-2010, 11:43 PM

Thanks! I love the sound when it lopes and moves the trucks back and forth!

WillieloRidez · 11-23-2010, 11:13 AM

Lookin great man!

bmfpeterson · 11-29-2010, 01:02 PM

awesome so I guess I lose the race hahahahaha

Devillusion · 12-13-2010, 08:22 PM

very nice....

bmfpeterson · 12-14-2010, 11:25 AM

Quote:

Originally Posted by Devillusion

very nice....

I know some people in Killarney. They own the pleasant valley golf resort I believe it is near Brandon? funny

Devillusion · 12-14-2010, 11:28 AM

Quote:

Originally Posted by bmfpeterson

I know some people in Killarney. They own the pleasant valley golf resort I believe it is near Brandon? funny

What is even funnier is that I grew up in Killarney....lol. Cool. I don't know the current owners but yeah, I'm only an hour away from there now. Do you ever come up here?

bmfpeterson · 12-14-2010, 04:26 PM

Quote:

Originally Posted by Devillusion

What is even funnier is that I grew up in Killarney....lol. Cool. I don't know the current owners but yeah, I'm only an hour away from there now. Do you ever come up here?

I wish! it's been years since Ive been up. Last time I was there we took a fishing trip out of flin flon. pretty cool!
The family's name is Hall that own it really good people. Ive had some good times there on that lake. and lots of beers! lol

Devillusion · 12-14-2010, 04:34 PM

Quote:

Originally Posted by bmfpeterson

I wish! it's been years since Ive been up. Last time I was there we took a fishing trip out of flin flon. pretty cool!
The family's name is Hall that own it really good people. Ive had some good times there on that lake. and lots of beers! lol

Ya, been fishing up in Sturgeon Landing....crazy fishing up there. There are a few "Halls" from around there. Have to give me a shout if you ever come up again....at least stop by for a beer!

franky69c10 · 01-28-2011, 03:44 AM

Look'n good

so u did ur own harness was it hard and maybe u can help me with my harness when I get my 5.3
Posted via Mobile Device

breeze85cten · 01-28-2011, 11:10 PM

If the harness is for that black c10 I am down!! I did work my own harness but with all the help from lt1swap.com This guy has all the information you need to work your own harness if you want to save a 1000 bucks. It takes lots of time but I did it that way because my harness was cut in a couple places and to save money of course. The whole time i was worried about it not being right but it fired right up. Let me know if you have any more questions, since you in AZ that makes it easier. I was at the pavillions last weekend when barrett jackson was here too. Truck was sitting on the ground there for a couple of hours, might start taking it more.

broey · 02-20-2011, 12:05 AM

Your truck is sweet man! Im trying to get something rolling for a c-10 meet up at the pavilions. I'll post a thread about it soon.

breeze85cten · 02-20-2011, 11:37 AM

Quote:

Originally Posted by broey

Your truck is sweet man! Im trying to get something rolling for a c-10 meet up at the pavilions. I'll post a thread about it soon.

Thanks, hope to be cruising it with a bunch of bad ass c10's soon. I was posting on the other threads about meeting up the weekend of good guys in March.

breeze85cten · 03-03-2011, 02:43 AM

Here are two pics of my truck in primer or at least half of it. Its coming along!

bmfpeterson · 03-03-2011, 12:48 PM

nice lookin good!

mooseknuckles · 03-03-2011, 10:26 PM

sweet!

broey · 03-03-2011, 11:08 PM

breeze85cten · 03-05-2011, 10:24 PM

I decided to wait on taking apart my truck for the full body work it needs and take her to pavillions in a week for the weekend of good guys! I am excited to drive it again and hope to see alot of the AZ c10 guys out there as well!!! I will be hanging out on saturday by the autocross to check out my buddies 72 c10 he is going to run in it. See you guys then!!

Nobaddaze · 03-06-2011, 10:35 PM

Truck looks good. when is he spraying color? i cant wait to see it done. (in my rearview that is)

breeze85cten · 03-07-2011, 12:45 AM

Quote:

Originally Posted by Nobaddaze

Truck looks good. when is he spraying color? i cant wait to see it done. (in my rearview that is)

HAHAHA! wishing and dreaming young man! jk. glad to see you post something finally! Now start your build thread so you will stay motivated and stop slacking off!!

Nobaddaze · 04-05-2011, 12:43 AM

Any updates? interior?

P.S. Hows my motor coming??

breeze85cten · 04-06-2011, 01:48 AM

Quote:

Originally Posted by Nobaddaze

Any updates? interior?

P.S. Hows my motor coming??

Layed some paint on the interior. Love the color! Will get some pics hopefully soon. Interior is coming along but havent seen it yet. Hope to get the dash and the door panels back this week. I will bring them over to show you.

About your motor, I havent talked to Jason since the Goodguys show so I am sure it is collecting dust for you! I will talk to him soon hopefully!

11-21-2010, 03:36 PM	#1
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build I finally had enough time to finish the harness and route it to all the sensors and wire loom it! The engine harness is ready and just fired her up today for the first time!!! Sounds awesome with the big cam. Of course the video doesnt do it justice. At first I couldnt get oil pressure for the life of me so I went thought it might be the pick up tube being pinched but changed it and it wasnt it then went to my last resort which was change the oil pump but after I did that it still was the same no pressure! This whole time I was turning the engine over with the starter and no spark plugs to build pressure but it wasnt enought so I ended up pooring oil down the oil sensor hole and then went to actually start it and it had oil pressure within 3 seconds!! Thank god. So all I had to do was prime it through the oils sensor hole!! Hope you guys like it.

11-21-2010, 10:36 PM	#2
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build hope video works its on you tube Last edited by breeze85cten; 11-21-2010 at 10:39 PM.

11-21-2010, 10:42 PM	#4
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: GEN III C10 Full Air ride build music to my ears!! sounds and looks great man! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-22-2010, 11:43 PM	#5
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build Thanks! I love the sound when it lopes and moves the trucks back and forth!

11-23-2010, 11:13 AM	#6
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: GEN III C10 Full Air ride build Lookin great man! __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

11-29-2010, 01:02 PM	#7
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: GEN III C10 Full Air ride build awesome so I guess I lose the race hahahahaha

12-13-2010, 08:22 PM	#8
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: GEN III C10 Full Air ride build very nice.... __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

01-28-2011, 03:44 AM	#13
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: GEN III C10 Full Air ride build Look'n good so u did ur own harness was it hard and maybe u can help me with my harness when I get my 5.3 Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

01-28-2011, 11:10 PM	#14
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build If the harness is for that black c10 I am down!! I did work my own harness but with all the help from lt1swap.com This guy has all the information you need to work your own harness if you want to save a 1000 bucks. It takes lots of time but I did it that way because my harness was cut in a couple places and to save money of course. The whole time i was worried about it not being right but it fired right up. Let me know if you have any more questions, since you in AZ that makes it easier. I was at the pavillions last weekend when barrett jackson was here too. Truck was sitting on the ground there for a couple of hours, might start taking it more.

02-20-2011, 12:05 AM	#15
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: GEN III C10 Full Air ride build Your truck is sweet man! Im trying to get something rolling for a c-10 meet up at the pavilions. I'll post a thread about it soon. __________________ Squarebody Syndicate

03-03-2011, 02:43 AM	#17
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build Here are two pics of my truck in primer or at least half of it. Its coming along! Attached Images

03-03-2011, 12:48 PM	#18
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: GEN III C10 Full Air ride build nice lookin good!

03-03-2011, 10:26 PM	#19
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: GEN III C10 Full Air ride build sweet! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

03-03-2011, 11:08 PM	#20
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: GEN III C10 Full Air ride build __________________ Squarebody Syndicate

03-05-2011, 10:24 PM	#21
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: GEN III C10 Full Air ride build I decided to wait on taking apart my truck for the full body work it needs and take her to pavillions in a week for the weekend of good guys! I am excited to drive it again and hope to see alot of the AZ c10 guys out there as well!!! I will be hanging out on saturday by the autocross to check out my buddies 72 c10 he is going to run in it. See you guys then!!



Register or Log In To remove these advertisements.

03-06-2011, 10:35 PM	#22
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: GEN III C10 Full Air ride build Truck looks good. when is he spraying color? i cant wait to see it done. (in my rearview that is)

04-05-2011, 12:43 AM	#24
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: GEN III C10 Full Air ride build Any updates? interior? P.S. Hows my motor coming??

Register or Log In To remove these advertisements.