MN My little 67-72 parts yard- pickup only

[Chrome8]

Any chance you could get the tilt column, the shift linkage, gas pedal, and th400 kickdown cable with the switch that goes behind the gas pedal to Northstar auto auction in a box of some sort? I have an employee there every week that can bring it to me. Pending pricing of course.

[Vintage Windmills]

Originally Posted by 19Chevy67C10

How much for the horn cap from the red truck shipped to 77578, I will pay the 25 to pull it providing nothing is broken on it, I also want the backing piece that it snaps into including all nuts, bolts and washers etc. Also this would be coming from the truck with the buddy buckets in it.

Thanks and God Bless,

Kev...

Let me see how it cleans up, this could just be dirty or it could have corrosion, i should check it out more before giving a price.

Originally Posted by 56 chevy

fan shroud for 1971 chevy small block also need fan please let me know price shipped to 23325

Here's a good one in a 1970 350 C10. Should be what you need. Fan appears a original with fan clutch. I will pull and ship since i'm pulling the radiator anyways. Fedex ground is saying $50, that is the cheapest I could find (parcel post is saying 90 for some reason, did they raise rates?) Anyways total shipped price with fedex would be $110

[Vintage Windmills]

Originally Posted by Chrome8

Any chance you could get the tilt column, the shift linkage, gas pedal, and th400 kickdown cable with the switch that goes behind the gas pedal to Northstar auto auction in a box of some sort? I have an employee there every week that can bring it to me. Pending pricing of course.

Which location? Shakopee would probably work, I have a neighbor who works there. Otherwise my place is only 15 mins from there or I am going to fargo soon and could meet you along I94. I'd need a little more for pulling and the linkage. I think the pedal and switch are gone but will check it out. I would need 300 for column and shift linkage and bracket. Steering wheel not included. SPID shows truck configuration, TH400, BBC, tilt all to be original.

[56 chevy]

sound good pm me your info I can get a money order to you

[Chrome8]

Price will work PM me your information, Is a check from a Chevrolet Buick dealership ok? I would prefer if you dropped the stuff off at Northstar in Shakopee because Fargo is about an hour and a half from me. My used car buyer can grab it on any thursday, if you could wrap or box it that would be great just for ease of handling and sitting around in their office until he grabs it. Do you still have the buddy buckets? Maybe we could work out something on those if you do. One of my Techs owes me some money and likes to tinker with upholstery work, my wheels are turning.

[Vintage Windmills]

Originally Posted by Chrome8

Price will work PM me your information, Is a check from a Chevrolet Buick dealership ok? I would prefer if you dropped the stuff off at Northstar in Shakopee because Fargo is about an hour and a half from me. My used car buyer can grab it on any thursday, if you could wrap or box it that would be great just for ease of handling and sitting around in their office until he grabs it. Do you still have the buddy buckets?

Check should be good if you can wait a few days for it to clear. Truck does have a kickdown switch in it, let me pull that and check it out. Buddies are sold already.

Originally Posted by almostaranch2001

hi

can you send me pictures of the visors and shifter please

Pics of visors and shifter.

[Chrome8]

Ok, let me know on the th400 kick down. Thanks

[cypressbog]

What's your inventory of good clean 68 cabs, or 67 big window?

[Vintage Windmills]

Originally Posted by cypressbog

What's your inventory of good clean 68 cabs, or 67 big window?

I've got a 67 big window AC cab that is pretty solid. Just needs the usual rockers and maybe a support, but can get photos if you are interested. Its still on the 67 GMC.

[cypressbog]

I'd like to see pics. No rush. I'm not certain I'm interested in AC.
Posted via Mobile Device

[jabborabbo]

How much shipped to 35750 for the gauge cluster shown here? Also would be interested in the sunvisors and the clips.

Thanks!

[Bpilcher72]

any chance an of those trucks have a good ac dash you would sell?

[Vintage Windmills]

Originally Posted by jabborabbo

How much shipped to 35750 for the gauge cluster shown here? Also would be interested in the sunvisors and the clips.

Thanks!

$85 shipped for cluster and a pair of visors with clips.

Originally Posted by Bpilcher72

any chance an of those trucks have a good ac dash you would sell?

Yes, good 68-72 ac dash and a good 67 AC dash but not interested in pulling and shipping something that big at this time, I'll see if the complete cabs sell first.

[Vintage Windmills]

Pics for 19Chevy67C10: This rare item would be $65 total shipped, light pitting but the glass is clear with no back delam and all 6 tabs are damage free. These were only on the super customs





Pics of cab on same truck for Cypressbog. There is one spot on firewall would need some repair. Solid visor and upper areas. 67 AC cabs are pretty rare, the dash is unique in them. I'd do $300 picked up on cab:

[jabborabbo]

Originally Posted by Vintage Windmills

$85 shipped for cluster and a pair of visors with clips.

....

I'll take the lot. PM inbound.

[cypressbog]

I'll pass on this one. There's someone out there looking for this.
Posted via Mobile Device

[Vintage Windmills]

Originally Posted by cypressbog

I'll pass on this one. There's someone out there looking for this.
Posted via Mobile Device

Yep, its a hard to find configuration and pretty clean for this part of the country

[jabborabbo]

Another PM sent....

[Chrome8]

Did you have a chance to pull that kick down switch? Have the cable too? Not trying to be pushy. We can figure out a total number so I can get you that check.

[Vintage Windmills]

Guys please let me know on the visors/shifter and horn cap.

chrome8, Here is the whole kickdown setup, with cable, switch, carb bracket.

[Vintage Windmills]

Originally Posted by Chrome8

Did you have a chance to pull that kick down switch? Have the cable too? Not trying to be pushy. We can figure out a total number so I can get you that check.

i tested the switch and it works. $375 for all your parts pulled and deliverd to northstar. let me kmow.

Jud
Posted via Mobile Device

[Chrome8]

would 350 work?

[Vintage Windmills]

sorry i thimk its competitive at 375. its a nice tilt and linkage
Posted via Mobile Device

[Chrome8]

I'll take it, PM me your info so I can get you a check. No rush on getting the stuff to Northstar, I'll need to give you instructions before you do that anyway. Just to confirm, the tilt column (tight) shift linkage, and kickdown setup you showed in the pics with the pedal, (what's left of it).

[Vintage Windmills]

Originally Posted by Chrome8

I'll take it, PM me your info so I can get you a check. No rush on getting the stuff to Northstar, I'll need to give you instructions before you do that anyway. Just to confirm, the tilt column (tight) shift linkage, and kickdown setup you showed in the pics with the pedal, (what's left of it).

Sounds good, yes correct on all points. Sending PM with payment info. Thanks,

Jud