KS parting out 72 GMC LB BB - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MadnessBigBlock · 01-31-2012, 11:21 PM

The passenger side firewall exhaust heat shield is not attached to the manifolds/exhaust it is bolted to the lower passenger firewall section! price shipped to 58265? and pm me if you decide to part the motor I'm up on p/s set up and water pump pulley! Thanks, brett
Posted via Mobile Device

**Cash3481** · 01-31-2012, 11:45 PM

Quote:

Originally Posted by MadnessBigBlock

The passenger side firewall exhaust heat shield is not attached to the manifolds/exhaust it is bolted to the lower passenger firewall section! price shipped to 58265? and pm me if you decide to part the motor I'm up on p/s set up and water pump pulley! Thanks, brett
Posted via Mobile Device

Brett Sorry about that, heat shield... if its still there. Ill check on it tomorrow and the P/S setup and WP pulley if I part the motor. Got it. Mike

teeitup · 01-31-2012, 11:57 PM

Come on Mike, get to work, lol. Your doing great!!!
Sorry I'm not going to be able to make it to swap meet after all, I don't have anyone to run clubhouse at golf course so I have to stay. Good luck hope you find some goodies!!!

**Cash3481** · 02-01-2012, 12:05 AM

Quote:

Originally Posted by teeitup

Come on Mike, get to work, lol. Your doing great!!!
Sorry I'm not going to be able to make it to swap meet after all, I don't have anyone to run clubhouse at golf course so I have to stay. Good luck hope you find some goodies!!!

My wife goes your way all the time for the state so if you need something let me know. Have a great weekend anyway. Hope the eagle gets sold! Mike
Posted via Mobile Device

tooter · 02-01-2012, 12:12 AM

I will Pass --on the stuff I asked about. Found most of it local today.
Thanks so much an keep up the good work.

**Ironhorse** · 02-01-2012, 12:12 AM

cash3481, Interested in the # 18 $40 column pending condition. I need a complete column with all brackets for my '71 4x4 I am converting from 4 spd. std. to TH350 auto. Have a floor shift tilt right now, looking for a auto column, drop in useable and complete. Would prefer tilt but NEEDING a auto to make the swap first. I will be at the swap meet Fri. and Sat in Pavillion 1, SE corner near roll up door. Would be great if you could bring the column with you, maybe we can work a trade or cash sale outright.

chachi127 · 01-31-2012, 11:23 PM

Is the front bumper for sale? If so what is the condition.

**Cash3481** · 01-31-2012, 11:38 PM

Quote:

Originally Posted by chachi127

Is the front bumper for sale? If so what is the condition.

Chachi: Dented (twisted down) from pushing it with a front end loader (PO). and so is the grill but just slightly. D/S bezel is good but P/S is tweeked too much to use.

72cheyenneman · 01-31-2012, 11:42 PM

Hi, Mike...I just sent you some money. If you need more for the shipping, let me know. Thanks, Casey

**Cash3481** · 02-01-2012, 03:07 PM

Quote:

Originally Posted by 72cheyenneman

Hi, Mike...I just sent you some money. If you need more for the shipping, let me know. Thanks, Casey

Casey: Sent the bolts to you 2 day. Shipping was covered with what you sent, so I spent it all.

Hope that helps.

**Cash3481** · 02-01-2012, 03:14 PM

Everyone waiting on prices will get them tomorrow. I took the next two days off to get your parts off and potientially ready to ship to you. If there are any questions feel free to post'em up and Ill address them as soon as possible.

V/R,
Cash

**jimer1964** · 02-01-2012, 05:49 PM

no rush on my part, interested in chrome vent windows what is story on them? thanks

chachi127 · 01-31-2012, 11:45 PM

Thanks but I'll pass on the bumper. Good luck with your sales.

DD1 · 02-01-2012, 05:55 PM

Mike,

Just wanted to let you know I am still here and still interested. Take your time - I am in no rush. I am picking up my A/C cab on Monday, and it will be a while before I get to installing any of this stuff!

I had to print out your list and highlight lines to make sure I did not get confused. Just to make sure we are on the same page:

I absolutely want the washer bottle and bracket, the dome light, and A/C heater controls.

I also want the outside heater box and all the interior A/C - Heat parts (duct's vents, etc.) except for the inner heater box. I might be interested in #36 package with the outer heater box for $100, but I need to see a photo to get my mind around your description of the issues with it.

Looking forward to hearing from you with prices and pics.

Thanks!!

Darien

DD1 · 02-01-2012, 05:56 PM

Question to anyone who reads this: I am assuming there is no difference in the glove box lid between A/C and non-A/C cabs; would I be right?

tooter · 02-01-2012, 06:07 PM

Quote:

Originally Posted by DD1

Question to anyone who reads this: I am assuming there is no difference in the glove box lid between A/C and non-A/C cabs; would I be right?

No differance in door just the inside felt box.

DD1 · 02-01-2012, 06:00 PM

Mike, I forgot to ask you about #1 - I am installing an automatic shift column in my truck with a TH350. Will the shifter linkage you describe in #1 work for that? If so, then I will take it.

Can you post a pic of the linkage setup?

DD1 · 02-01-2012, 06:11 PM

Thanks, tooter. Appreciate the feedback.

**Cash3481** · 02-02-2012, 12:45 AM

Quote:

Originally Posted by jimer1964

no rush on my part, interested in chrome vent windows what is story on them? thanks

Vents are pretty nice, I'll get pics in the morning. They are removed already along with everything from the doors.

Quote:

Originally Posted by DD1

Mike,

Just wanted to let you know I am still here and still interested. Take your time - I am in no rush. I am picking up my A/C cab on Monday, and it will be a while before I get to installing any of this stuff!

I had to print out your list and highlight lines to make sure I did not get confused. Just to make sure we are on the same page:

I absolutely want the washer bottle and bracket, the dome light, and A/C heater controls.
Got it!

I also want the outside heater box and all the interior A/C - Heat parts (duct's vents, etc.) except for the inner heater box. I might be interested in #36 package with the outer heater box for $100, but I need to see a photo to get my mind around your description of the issues with it.

Looking forward to hearing from you with prices and pics.

Thanks!!

Darien

Posted via Mobile Device

**Cash3481** · 02-02-2012, 12:49 AM

DD1
I'll show it all with pics by afternoon tomorrow. I took it off to get this thing parted. You will hear from me around lunchtime.
Mike
Posted via Mobile Device

68lowburb · 02-02-2012, 12:52 AM

bump

oklalawnboy · 02-02-2012, 08:20 AM

Just a reminder I'm still interested in a orange/red white left Cheyenne fender.

**Cash3481** · 02-02-2012, 08:58 AM

Quote:

Originally Posted by oklalawnboy

Just a reminder I'm still interested in a orange/red white left Cheyenne fender.

Oklalawnboy: I'm going out to tear it all off in a few. Should be back on here with your pics around lunch. I'll be weighing it all and getting shipping prices for everyone today. Mike
Posted via Mobile Device

oklalawnboy · 02-03-2012, 01:03 AM

Quote:

Originally Posted by Cash3481

Oklalawnboy: I'm going out to tear it all off in a few. Should be back on here with your pics around lunch. I'll be weighing it all and getting shipping prices for everyone today. Mike
Posted via Mobile Device

No hurry.

wrwelton · 02-02-2012, 12:30 PM

I am looking for rear inner bumper brackets

02-01-2012, 12:12 AM	#5
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: parting out 72 GMC LB BB I will Pass --on the stuff I asked about. Found most of it local today. Thanks so much an keep up the good work. __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

02-01-2012, 12:12 AM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,160	Re: parting out 72 GMC LB BB cash3481, Interested in the # 18 $40 column pending condition. I need a complete column with all brackets for my '71 4x4 I am converting from 4 spd. std. to TH350 auto. Have a floor shift tilt right now, looking for a auto column, drop in useable and complete. Would prefer tilt but NEEDING a auto to make the swap first. I will be at the swap meet Fri. and Sat in Pavillion 1, SE corner near roll up door. Would be great if you could bring the column with you, maybe we can work a trade or cash sale outright. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-31-2012, 11:23 PM	#7
chachi127 Registered User Join Date: Jan 2006 Location: Racine, WI Posts: 73	Re: parting out 72 GMC LB BB Is the front bumper for sale? If so what is the condition. __________________ 1972 GMC 'Project Red' Long Road Ahead

01-31-2012, 11:42 PM	#9
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: parting out 72 GMC LB BB Hi, Mike...I just sent you some money. If you need more for the shipping, let me know. Thanks, Casey

02-01-2012, 03:14 PM	#11
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Everyone waiting on prices will get them tomorrow. I took the next two days off to get your parts off and potientially ready to ship to you. If there are any questions feel free to post'em up and Ill address them as soon as possible. V/R, Cash

01-31-2012, 11:21 PM	#1
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: parting out 72 GMC LB BB The passenger side firewall exhaust heat shield is not attached to the manifolds/exhaust it is bolted to the lower passenger firewall section! price shipped to 58265? and pm me if you decide to part the motor I'm up on p/s set up and water pump pulley! Thanks, brett Posted via Mobile Device

01-31-2012, 11:57 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting out 72 GMC LB BB Come on Mike, get to work, lol. Your doing great!!! Sorry I'm not going to be able to make it to swap meet after all, I don't have anyone to run clubhouse at golf course so I have to stay. Good luck hope you find some goodies!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2012, 05:49 PM	#12
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: parting out 72 GMC LB BB no rush on my part, interested in chrome vent windows what is story on them? thanks

01-31-2012, 11:45 PM	#13
chachi127 Registered User Join Date: Jan 2006 Location: Racine, WI Posts: 73	Re: parting out 72 GMC LB BB Thanks but I'll pass on the bumper. Good luck with your sales. __________________ 1972 GMC 'Project Red' Long Road Ahead

02-01-2012, 05:55 PM	#14
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Mike, Just wanted to let you know I am still here and still interested. Take your time - I am in no rush. I am picking up my A/C cab on Monday, and it will be a while before I get to installing any of this stuff! I had to print out your list and highlight lines to make sure I did not get confused. Just to make sure we are on the same page: I absolutely want the washer bottle and bracket, the dome light, and A/C heater controls. I also want the outside heater box and all the interior A/C - Heat parts (duct's vents, etc.) except for the inner heater box. I might be interested in #36 package with the outer heater box for $100, but I need to see a photo to get my mind around your description of the issues with it. Looking forward to hearing from you with prices and pics. Thanks!! Darien

02-01-2012, 05:56 PM	#15
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Question to anyone who reads this: I am assuming there is no difference in the glove box lid between A/C and non-A/C cabs; would I be right?

02-01-2012, 06:00 PM	#17
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Mike, I forgot to ask you about #1 - I am installing an automatic shift column in my truck with a TH350. Will the shifter linkage you describe in #1 work for that? If so, then I will take it. Can you post a pic of the linkage setup? Last edited by DD1; 02-01-2012 at 06:17 PM.

02-01-2012, 06:11 PM	#18
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Thanks, tooter. Appreciate the feedback.

02-02-2012, 12:49 AM	#20
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB DD1 I'll show it all with pics by afternoon tomorrow. I took it off to get this thing parted. You will hear from me around lunchtime. Mike Posted via Mobile Device

02-02-2012, 12:52 AM	#21
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: parting out 72 GMC LB BB bump



Register or Log In To remove these advertisements.

02-02-2012, 08:20 AM	#22
oklalawnboy Registered User Join Date: Jan 2012 Location: Glencoe Alabama Posts: 510	Re: parting out 72 GMC LB BB Just a reminder I'm still interested in a orange/red white left Cheyenne fender. __________________ 72 Cheyenne super 10 08 3500 HD 4dr dually 12 ford flex (wifes ride) 76 Monte Carlo 83 Chevy short wide Silverado 96 Mazda Miata, 2000 Allegro Bus

02-02-2012, 12:30 PM	#25
wrwelton Registered User Join Date: Mar 2006 Location: massachusetts Posts: 180	Re: parting out 72 GMC LB BB I am looking for rear inner bumper brackets Attached Images __________________ I know I can! I know i can! 72 K20 Restoration

Register or Log In To remove these advertisements.