Parting out a 1968 short stepper - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 06-22-2009, 11:57 AM

column is out and ready to ship, 4 on the floor, no tilt,and its all tight 70.00 plus ship.
not including the steering wheel

67 c10 guy · 06-22-2009, 12:17 PM

gonna pass on the column

**michael bustamante** · 06-24-2009, 04:41 PM

Got pics of the dash harness. it all looks pretty good but It looks like the headlight plug has been replaced at one time and the wires were twisted together. Also the brake light switch was cut and the orange and white wires need lengthening but I do have the connector. I will correctly solder and seal these before selling. new price. 45.00 plus the ride fuse box is in good shape but I didnt snap a pic. if you need more pics let me know

**invicta455** · 06-24-2009, 05:06 PM

how much for the hump and the shifter

**michael bustamante** · 06-24-2009, 05:14 PM

well I was hoping to sell the tranny whole But I can get my hands on another shifter. the hump and shifter can go for 45.00 plus the ride
The hump is in perfect shape, no rust. the shifter is good as well. is the 3 speed with the granny shifter the same as a four on the floor? I have both but dont know off hand if theyre the same

tabarcus · 06-24-2009, 08:51 PM

Do you have passenger side inner and outer fendsers? If so, please post pictures.

**rockc** · 06-24-2009, 09:26 PM

if ya decide to part out bed put me in for those angle irons

**michael bustamante** · 06-25-2009, 10:05 AM

tabarcus, The inner fender I thought was goo but when I took it off the rad support it was rotted underneath, its not worth shipping, and the 68 fenders are gone. sorry
rockc: you got it, youll be the first to know

**michael bustamante** · 06-25-2009, 10:52 AM

Worley91: pics of the fenders for concideration. as you can see the passenger fender has a crease in it but the crease doesnt go the any bodylines or the wheel well lip so its an easy fix. let me know what you think

**michael bustamante** · 06-26-2009, 10:08 AM

ttt. if you need anything and dont see what youre looking for in the pics let me know, chances are I got it. Also Ill be cutting up the cab for patch panals if anyone is needing anything, the rockers and cab corners are gone but the floor and roof are solid as well as most of the rest of the cab

**michael bustamante** · 06-26-2009, 05:49 PM

give myself a bump b4 I go home for the day, also to let you guys know, the beds in great condition, I have it loadedonto a trailer so if you live in NM or around I could meet somewhere if you guys need ANY pics let me know

06-22-2009, 11:57 AM	#51
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting out a 1968 short stepper column is out and ready to ship, 4 on the floor, no tilt,and its all tight 70.00 plus ship. not including the steering wheel __________________ 1967custom Last edited by michael bustamante; 06-22-2009 at 11:57 AM.

06-22-2009, 12:17 PM	#52
67 c10 guy Registered User Join Date: Jan 2009 Location: 77042, Texas Posts: 102	Re: Parting out a 1968 short stepper gonna pass on the column __________________ 67 C10 longbed 350/th350 13 Ford Fusion 2.0T daily 67 lwb build sold

06-24-2009, 04:41 PM	#53
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting out a 1968 short stepper Got pics of the dash harness. it all looks pretty good but It looks like the headlight plug has been replaced at one time and the wires were twisted together. Also the brake light switch was cut and the orange and white wires need lengthening but I do have the connector. I will correctly solder and seal these before selling. new price. 45.00 plus the ride fuse box is in good shape but I didnt snap a pic. if you need more pics let me know Attached Images __________________ 1967custom

06-24-2009, 05:06 PM	#54
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 531	Re: Parting out a 1968 short stepper how much for the hump and the shifter

06-24-2009, 05:14 PM	#55
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting out a 1968 short stepper well I was hoping to sell the tranny whole But I can get my hands on another shifter. the hump and shifter can go for 45.00 plus the ride The hump is in perfect shape, no rust. the shifter is good as well. is the 3 speed with the granny shifter the same as a four on the floor? I have both but dont know off hand if theyre the same __________________ 1967custom

06-24-2009, 08:51 PM	#56
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	Re: Parting out a 1968 short stepper Do you have passenger side inner and outer fendsers? If so, please post pictures.

06-24-2009, 09:26 PM	#57
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 633	Re: Parting out a 1968 short stepper if ya decide to part out bed put me in for those angle irons __________________ 72 chevy 3/4 ton 4X4

06-25-2009, 10:05 AM	#58
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting out a 1968 short stepper tabarcus, The inner fender I thought was goo but when I took it off the rad support it was rotted underneath, its not worth shipping, and the 68 fenders are gone. sorry rockc: you got it, youll be the first to know __________________ 1967custom

06-25-2009, 10:52 AM	#59
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting out a 1968 short stepper Worley91: pics of the fenders for concideration. as you can see the passenger fender has a crease in it but the crease doesnt go the any bodylines or the wheel well lip so its an easy fix. let me know what you think Attached Images __________________ 1967custom

06-26-2009, 10:08 AM	#60
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting out a 1968 short stepper ttt. if you need anything and dont see what youre looking for in the pics let me know, chances are I got it. Also Ill be cutting up the cab for patch panals if anyone is needing anything, the rockers and cab corners are gone but the floor and roof are solid as well as most of the rest of the cab __________________ 1967custom

06-26-2009, 05:49 PM	#61
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting out a 1968 short stepper give myself a bump b4 I go home for the day, also to let you guys know, the beds in great condition, I have it loadedonto a trailer so if you live in NM or around I could meet somewhere if you guys need ANY pics let me know __________________ 1967custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.