MN Parting a 1972 Sierra Grande!!!!!!

[Vintage Windmills]

Originally Posted by skrenly

Hello,
I would like to offer $75 shipped for the glove box door.
Thanks for your consideration, Steve

Payment received, glad we came to an agreement

Door panels are still available but Deadhead is up on those after I post some more pics. Visors were sold to jimer1964.

Originally Posted by DANTIP

I'd like to buy the intake manifold and everything on top of it all the way to the air cleaner. I assume the Q-Jet is a 7042210.

I will check the number and weight (for shipping quote) and let you know. Is there a certain intake number you need?

[slammer72]

Have you had time to check out the license plate bracket? Still interested in the rear bumper brackets...im in no hurry just wondering.
Posted via Mobile Device

[DANTIP]

Originally Posted by Vintage Windmills

Payment received, glad we came to an agreement

Door panels are still available but Deadhead is up on those after I post some more pics. Visors were sold to jimer1964.



I will check the number and weight (for shipping quote) and let you know. Is there a certain intake number you need?

I'm confident the intake is correct (plus I don't know the correct casting).

Dan

[Vintage Windmills]

door panels after cleaning. No cracks or extra holes whatsoever. I inspected backside also and there are no cracks, even near mounting holes. Woodgrain would need a little touch up work to be show quality (worn in spots) but bright trim and plastic are show quality. Plastic does not show wear or have cuts, dings or gouges. Nice grain to it. there are a couple slight bends in the aluminum woodgrain from a elbow. Not noticeable but they are there, could be fixed if you took the aluminum panels off.

[Vintage Windmills]

More pics of panels

[DeadheadNM]

Wow - nice panels and thanks for the pics Jud. Wish these were parchment.

I'll pass on the intact set but if nobody else takes them or someone wants the panels without the woodgrain inserts please keep me in mind. I'm still interested in the windshield trim and gasket but in no rush. Pete

[Vintage Windmills]

Originally Posted by 6.0 1955

Payment sent via paypal for linkage. Thanks
Posted via Mobile Device

Thanks, got it.

Originally Posted by Rodk65

I am looking for a clean set of black seat belts. I need a center belt also. Are they still available? Do the retractors work properly? Thanks

They are but I haven't gotten them all out yet. Bases are rusty where mounted to floor (retractors) but they do work. Let me get them out and cleaned up this weekend. One is chewed by mice but think its the driver stationary belt. Chrome has some rust on one.

Originally Posted by dan s

HELLO , I am interested in the two upper cab corner trim pcs, and one lower wood cab corner trim(are both lowers the same ??) Thanks Dan

they are different as far as I know , what side do you need the lower wood trim for?

Originally Posted by slammer72

Have you had time to check out the license plate bracket? Still interested in the rear bumper brackets...im in no hurry just wondering.
Posted via Mobile Device

I should have time before dark tomorrow. Its dark when i leave and get home from work.

[dan s]

I dont know which side I need! Give me a price for both uppers and lowers shipped to 14534 Thanks Dan

[Vintage Windmills]

Originally Posted by DANTIP

I'd like to buy the intake manifold and everything on top of it all the way to the air cleaner. I assume the Q-Jet is a 7042210.

Dan, Intake does look original to the truck. Carb is indeed 7042210 but that is different from the 7042208 one from my 72 K20, so which is correct? Difference due to K20 vs C10?

Total weight will be 55lbs so I can do $95 parcel post shipped to zip 46803 or neighboring zip code.

[Vintage Windmills]

Originally Posted by dan s

I dont know which side I need! Give me a price for both uppers and lowers shipped to 14534 Thanks Dan

Unlike some of the other pieces of trim, these have some dings, some weathering of woodgrain. Uppers are ding free but have light scratches and will need paint stripe. I'll do $29 shipped for the 4 cab corner pcs.

[slammer72]

I would split the panels with deadhead if we could come up with a fair price.
Posted via Mobile Device

[Rodk65]

Let me know when you get the seat belts out. Thanks

[dan s]

Originally Posted by Vintage Windmills

Unlike some of the other pieces of trim, these have some dings, some weathering of woodgrain. Uppers are ding free but have light scratches and will need paint stripe. I'll do $29 shipped for the 4 cab corner pcs.

PM sent!

[DeadheadNM]

Originally Posted by slammer72

I would split the panels with deadhead if we could come up with a fair price.
Posted via Mobile Device

I'm on board....

[Vintage Windmills]

Guys, I'd prefer to keep the door panels together at this point. Maybe you could work out a deal with each other? Just a thought.

Jud

[DANTIP]

Originally Posted by Vintage Windmills

Dan, Intake does look original to the truck. Carb is indeed 7042210 but that is different from the 7042208 one from my 72 K20, so which is correct? Difference due to K20 vs C10?

Total weight will be 55lbs so I can do $95 parcel post shipped to zip 46803 or neighboring zip code.

I'll do it! I'd like all of the bolts if you don't mind. Also would like coil bracket, coil, water neck, (maybe the distributor). The 7042210 was the correct carb for the C10 and K10 350's in '72.

Dan

[teeitup]

Man those door panels cleaned up NICE Jud!!!!!!!! If I didn't have a set for my blazer already I'd be all over them, good luck

[Vintage Windmills]

Originally Posted by DANTIP

I'll do it! I'd like all of the bolts if you don't mind. Also would like coil bracket, coil, water neck, (maybe the distributor). The 7042210 was the correct carb for the C10 and K10 350's in '72.

Dan

Sending PM with payment info.

Randy, Yep. I think these are a good deal for someone!

[ItsRandy]

Originally Posted by Vintage Windmills

Just in, rusty but has some nice woodgrain pieces. I think the tint and cloudy minnesota conditions helped preserve the interior. The exterior on the other hand, was a victim of road salt. Grille and bumpers aren't good.

Glovebox door: $125 shipped
Int. Door panels: $225 shipped (dirt on them now, will clean up nice, minor wear)
Vent windows: $100 shipped
Sierra Grande bed emblem: $25 shipped
Sierra bed emblem: $15 shipped

Shipping is Conus. If you ask about something, you are intending to buy and have 24 hours, otherwise i move on to the next person.

Windshield not for sale and Eric has 1st shot on woodgrain pcs and emblems since he tipped me off about this truck (one mile from my house )

If you are local, other stuff will be very reasonably priced if you pull it. I also have other parts and parts truck here to make it worth a trip.

Ask about other stuff. Please don't inquire if your not serious. Thanks in advance all,

Jud

How much for and what do the two rear wheel houses look like?

[Vintage Windmills]

The lips where it bolts to the wood floor are rusted off. They'd be good for patches only.

[Vintage Windmills]

Guys, I am going to pull what has been asked about tomorrow. IF there is anything else anyone else is interested in, you need to ask now, this will be going for scrap soon.

[DeadheadNM]

Originally Posted by Vintage Windmills

Guys, I'd prefer to keep the door panels together at this point. Maybe you could work out a deal with each other? Just a thought.

Jud

Thanks guys but I couldn't pass up these unused Golden State woodgrain inserts on ebay (http://www.ebay.com/itm/380400197742...WNX:IT&vxp=mtr ) so I'm set for now.

[teeitup]

Pete, did you get the woodgrain glove box door too? I seen the panels and goor, they are nice.

[botmfedr1]

Vintage,

I am going to pass on the fan shroud. Got another lined up.

Thanks,
Mondo

[DeadheadNM]

Originally Posted by teeitup

Pete, did you get the woodgrain glove box door too? I seen the panels and goor, they are nice.

Randy, did the same seller have a door? If so I missed out and was also a bit too late for the door Jud advertised - that was nice too.