89 crew cab k20 4wd twin turbo cummins swap - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBear · 12-18-2012, 10:53 AM

hey bud.....noticed you trimmed out the passenger side front of the frame, for the air conditioning compressor I would guess, and was wondering if you had figured the strength reduction if any? the reason I am asking is because I wanted to try the same with mine. Just wasn't sure if it would be enough support? Thanks

Nice build once again!

eric28miller · 12-20-2012, 02:36 PM

lol THANKS guys!
DBear - Yep i trimmed out the frame for the a/c compressor, i didn't want to mount it on top of the motor, but rather keep it hidden for a cleaner look. I then welded in a 3/8" plate of steel.

eric28miller · 12-23-2012, 02:24 PM

Just dropped the motor in for the final time last night. I know how much you guys like pics so here ya go : )

Changed the angle of the shifter a bit.

Car'n'Guitars · 12-23-2012, 02:45 PM

Looking great, this is going to be one awesome truck.

powmia84 · 12-30-2012, 05:47 PM

Eric you wouldn't be interested in building another hot pipe for the turbos.

1968vetL-71 · 12-30-2012, 07:14 PM

That engine/trans/t-case pic is a work of art. Love it!!!!!!! Great build man!
Posted via Mobile Device

dieselmec1993 · 12-30-2012, 08:39 PM

Love this build
Posted via Mobile Device

eric28miller · 01-01-2013, 02:01 PM

Thanks you guys, i've never built anything like this before but i'm pretty happy with how it's going. I'm hoping to get it done before my wedding next August so we can get some pics with it..

Quote:

Originally Posted by powmia84

Eric you wouldn't be interested in building another hot pipe for the turbos.

I probably could if i had time, but I barely have time to work on my own project.. My hot pipe came with Industrial Injection's turbo kit, I would call them and see if they would sell it to you

thirdstreettito · 01-01-2013, 03:59 PM

Subbed!

powmia84 · 01-01-2013, 09:30 PM

Thanks Eric I'll give them a try.

mooseknuckles · 01-02-2013, 12:07 AM

awesome build!

MadManAndrew · 01-02-2013, 01:28 PM

How much HP do you think that motor will be pushing? Over on the Cummins forums all those guys can talk about is finding a tranny that won't blow round about 500 horses.
Posted via Mobile Device

eric28miller · 01-11-2013, 01:30 PM

Quote:

Originally Posted by MadManAndrew

How much HP do you think that motor will be pushing? Over on the Cummins forums all those guys can talk about is finding a tranny that won't blow round about 500 horses.
Posted via Mobile Device

It should dyno close to 850 with timing and injection maxed out. My engine builder recommended the nv4500 with a billet input shaft. He ran one on his pulling truck for years without any problems, but the np205 transfer case i'm worried about. I'm using a rebuilt unit bored larger for extreme duty bearings, i'm told the gears like to walk up on each other. I picked up a spare if i need it. The other weak link is my 14 bolt rear, it may last a little while but definitely not forever. I talked to a local shop who can bore the tubes and housing to fit larger gears and billet shafts. I probably could've spent more time researching a stronger set-up but i'm too impatient

meatwagon83 · 01-11-2013, 02:05 PM

14 bolt not enough? wow thats puttin out some grunt, where do you go after that? dana 80?

eric28miller · 01-14-2013, 12:40 AM

Quote:

Originally Posted by meatwagon83

14 bolt not enough? wow thats puttin out some grunt, where do you go after that? dana 80?

I'm not sure yet, i'll cross that bridge when I come to it.

82ccshorty · 01-14-2013, 12:41 AM

What valve covers do you have
Posted via Mobile Device

Maxxd07 · 01-14-2013, 01:03 AM

Subin up for another sweet build. How comfortable are the KR seats? Seen a few sets around here for sale but want major $$$$ for them.

eric28miller · 01-14-2013, 01:08 AM

I just finished mounting the doors and new style chevy tow mirrors. They were a lot of work and look slightly awkward how they're mounted but totally worth it in my opinion. I made an exact replica of the window with stainless steel and bolted the mirrors to em. The mirrors moved too much so I then had to weld a heavier plate on the inside of the door. Should work great, look decent, and they will be wired up to the factory power mirror harness.

I know some of you won't like the mirrors or how i mounted them but please don't rain on my parade...

Here's some pics, thanks guys!

Maxxd07 · 01-14-2013, 10:36 AM

Great idea, I always wondered how they would work. How about some closeups of the mounting and a straight side shot of them?
Posted via Mobile Device

Eyegore · 01-14-2013, 11:18 AM

Love this build keep the pics coming!!!!!!!!!!!!!!!!

eric28miller · 01-14-2013, 11:27 AM

Quote:

Originally Posted by 82ccshorty

What valve covers do you have
Posted via Mobile Device

They came with the motor so I guess they're used on all AG use engines.

The seats have a nice comfortable shape but the leather got dry and hard. I'm hoping the KR leather conditioner will soften them. I picked mine up off ebay, i have $750 in em.

Here's a straighter side shot. I'll post close up pics after it's all painted here at the end of the month.

V3500KING · 01-16-2013, 02:14 PM

I like the mirrors. I was going to do the same thing. If you end up blowing up the 14 bolt you could step up to a dana 80, or get an AAM 1150. The AAM is the "new" version of the 14 bolt and is just as strong as the dana 80. Its what is being used in all the new chevy and dodge trucks.

cdm10700 · 01-20-2013, 08:19 PM

looks good man cant wait to see it painted, i feel for your painter i know where hes cumn from

Maxxd07 · 01-20-2013, 08:30 PM

I want to see a nice long video of this thing ripping it up when you get there its just awesome!

MadManAndrew · 01-20-2013, 09:51 PM

I like the look of the mirrors but I bet that's gonna be one big ass blind spot?
Posted via Mobile Device

12-18-2012, 10:53 AM	#51
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 865	Re: 89 crew cab k20 4wd twin turbo cummins swap hey bud.....noticed you trimmed out the passenger side front of the frame, for the air conditioning compressor I would guess, and was wondering if you had figured the strength reduction if any? the reason I am asking is because I wanted to try the same with mine. Just wasn't sure if it would be enough support? Thanks Nice build once again!

12-20-2012, 02:36 PM	#52
eric28miller Registered User Join Date: Apr 2012 Location: Cascade, Iowa Posts: 130	Re: 89 crew cab k20 4wd twin turbo cummins swap lol THANKS guys! DBear - Yep i trimmed out the frame for the a/c compressor, i didn't want to mount it on top of the motor, but rather keep it hidden for a cleaner look. I then welded in a 3/8" plate of steel.

12-23-2012, 02:24 PM	#53
eric28miller Registered User Join Date: Apr 2012 Location: Cascade, Iowa Posts: 130	Re: 89 crew cab k20 4wd twin turbo cummins swap Just dropped the motor in for the final time last night. I know how much you guys like pics so here ya go : ) Changed the angle of the shifter a bit.

12-23-2012, 02:45 PM	#54
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: 89 crew cab k20 4wd twin turbo cummins swap Looking great, this is going to be one awesome truck. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

12-30-2012, 05:47 PM	#55
powmia84 Registered User Join Date: Aug 2010 Location: Plain City,Ohio Posts: 4	Re: 89 crew cab k20 4wd twin turbo cummins swap Eric you wouldn't be interested in building another hot pipe for the turbos.

12-30-2012, 07:14 PM	#56
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 89 crew cab k20 4wd twin turbo cummins swap That engine/trans/t-case pic is a work of art. Love it!!!!!!! Great build man! Posted via Mobile Device __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-30-2012, 08:39 PM	#57
dieselmec1993 Registered User Join Date: Feb 2012 Location: Goshen, in Posts: 72	Re: 89 crew cab k20 4wd twin turbo cummins swap Love this build Posted via Mobile Device __________________ 1977 k20 frame with 85 cab and hopefully 6.5 diesel. 1981 c20 long box 250 3 on the tree daily driver. 1982 k25 with 86 cab tired 350 4speed trans 37in military tires.(project Frankenstein). 8. 1984 c30 crew cab dually 6.2diesel next project only 18 and finshed 5 projects started when i was

01-01-2013, 03:59 PM	#59
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 89 crew cab k20 4wd twin turbo cummins swap Subbed! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-01-2013, 09:30 PM	#60
powmia84 Registered User Join Date: Aug 2010 Location: Plain City,Ohio Posts: 4	Re: 89 crew cab k20 4wd twin turbo cummins swap Thanks Eric I'll give them a try.

01-02-2013, 12:07 AM	#61
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: 89 crew cab k20 4wd twin turbo cummins swap awesome build! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

01-02-2013, 01:28 PM	#62
MadManAndrew Registered User Join Date: Mar 2011 Location: Dallas, Texas Posts: 920	Re: 89 crew cab k20 4wd twin turbo cummins swap How much HP do you think that motor will be pushing? Over on the Cummins forums all those guys can talk about is finding a tranny that won't blow round about 500 horses. Posted via Mobile Device __________________ 1955 Chevy 3600 http://67-72chevytrucks.com/vboard/s...61#post8589061

01-11-2013, 02:05 PM	#64
meatwagon83 Registered User Join Date: Dec 2012 Location: Preble county ohio Posts: 1,914	Re: 89 crew cab k20 4wd twin turbo cummins swap 14 bolt not enough? wow thats puttin out some grunt, where do you go after that? dana 80?

01-14-2013, 12:41 AM	#66
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 89 crew cab k20 4wd twin turbo cummins swap What valve covers do you have Posted via Mobile Device __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

01-14-2013, 01:03 AM	#67
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: 89 crew cab k20 4wd twin turbo cummins swap Subin up for another sweet build. How comfortable are the KR seats? Seen a few sets around here for sale but want major $$$$ for them. __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

01-14-2013, 01:08 AM	#68
eric28miller Registered User Join Date: Apr 2012 Location: Cascade, Iowa Posts: 130	Re: 89 crew cab k20 4wd twin turbo cummins swap I just finished mounting the doors and new style chevy tow mirrors. They were a lot of work and look slightly awkward how they're mounted but totally worth it in my opinion. I made an exact replica of the window with stainless steel and bolted the mirrors to em. The mirrors moved too much so I then had to weld a heavier plate on the inside of the door. Should work great, look decent, and they will be wired up to the factory power mirror harness. I know some of you won't like the mirrors or how i mounted them but please don't rain on my parade... Here's some pics, thanks guys!



Register or Log In To remove these advertisements.

01-14-2013, 10:36 AM	#69
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: 89 crew cab k20 4wd twin turbo cummins swap Great idea, I always wondered how they would work. How about some closeups of the mounting and a straight side shot of them? Posted via Mobile Device __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

01-14-2013, 11:18 AM	#70
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89 crew cab k20 4wd twin turbo cummins swap Love this build keep the pics coming!!!!!!!!!!!!!!!! __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

01-16-2013, 02:14 PM	#72
V3500KING Registered User Join Date: Jul 2012 Location: Spring City, Utah Posts: 53	Re: 89 crew cab k20 4wd twin turbo cummins swap I like the mirrors. I was going to do the same thing. If you end up blowing up the 14 bolt you could step up to a dana 80, or get an AAM 1150. The AAM is the "new" version of the 14 bolt and is just as strong as the dana 80. Its what is being used in all the new chevy and dodge trucks.

01-20-2013, 08:19 PM	#73
cdm10700 Registered User Join Date: Dec 2012 Location: wabash, in Posts: 62	Re: 89 crew cab k20 4wd twin turbo cummins swap looks good man cant wait to see it painted, i feel for your painter i know where hes cumn from

01-20-2013, 08:30 PM	#74
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: 89 crew cab k20 4wd twin turbo cummins swap I want to see a nice long video of this thing ripping it up when you get there its just awesome! __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

01-20-2013, 09:51 PM	#75
MadManAndrew Registered User Join Date: Mar 2011 Location: Dallas, Texas Posts: 920	Re: 89 crew cab k20 4wd twin turbo cummins swap I like the look of the mirrors but I bet that's gonna be one big ass blind spot? Posted via Mobile Device __________________ 1955 Chevy 3600 http://67-72chevytrucks.com/vboard/s...61#post8589061

Register or Log In To remove these advertisements.