Project Step Aside, 1971 SWB/Step - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AJohn6 · 07-04-2008, 11:39 AM

Well, I got a bit more done yesterday. I got the airlines ran, and the rear shocks mounted. A piece of advice for all you newbies out there like myself, don't do any plasma cutting around freshly ran airlines... DOH!

Also, the fitting that was in the left front bag was leaking. I had to remove the upper plate since I just couldn't get it to stop leaking. Once I replaced the fitting it was all good.

**FRENCHBLUE72** · 07-04-2008, 03:05 PM

I have the clear ones on the botton link they are ok but how do yours look at night lit up?

AJohn6 · 07-04-2008, 04:55 PM

Frenchblue72, i guess it depends on what you are looking for. I don't really care for them because you can see the bulb at night. Thats why I like the non "Euro" ones. I will see if i can get a couple pic's of it when it gets dark out, let you be the judge.

wildchild · 07-04-2008, 07:34 PM

your truck looks awesome i hope my 70 looks that clean some day if you are looking online for parts check out kennys trucks in tulsa if you cant find what your looking for try calling him its not a real big shop but he can suprize you most of his stuff is cheaper than anyone else ive found

FREEMAN70 · 07-04-2008, 09:33 PM

man this truck is sweet, hope mine turns out half as good as this one. man i would like to maybe check it out sometime.

d10s69c10 · 07-11-2008, 10:26 PM

VERY VERY SICK BUILD! i want the same thing on my fleetside...

but if i may say one thing welder to welder i now the wieght of the truck is being held in front of your Frame notch. It would take a whole lot of wieght in the back to bend it but just 2 cents would be to box the spot where you notched it on the inside and possibly run a 1/4-3/8 flat gusset on the outside just to make sure nothing goes wrong.

done alot of gusseting on lowriders (hydraulics) and the brunt force tears these things apart.

BACKYARD88 · 07-11-2008, 11:13 PM

Looking good Mang

The Big Green · 07-13-2008, 11:12 AM

Now thats a saweeet truck, I cant wait to see how it sits. good job man! I am ordering the same wheels and want to see how they fit when aired out.

AJohn6 · 07-15-2008, 11:47 AM

Quote:

Originally Posted by toomanytoyz

Just wanted to see if the Brkt has showed up yet, If not i will check the Post Office & see what the Problem is............

Let me Know, Rick

Rick, thanks a million man, I got it.

Quote:

Originally Posted by c10addict

If it is lost I am pretty sure I have one I can send you.... Let me know..

c10addict, I appreciate the help, Ricks part came in.

Quote:

Originally Posted by d10s69c10

VERY VERY SICK BUILD! i want the same thing on my fleetside...

but if i may say one thing welder to welder i now the wieght of the truck is being held in front of your Frame notch. It would take a whole lot of wieght in the back to bend it but just 2 cents would be to box the spot where you notched it on the inside and possibly run a 1/4-3/8 flat gusset on the outside just to make sure nothing goes wrong.

done alot of gusseting on lowriders (hydraulics) and the brunt force tears these things apart.

I was thinking the same thing. I had been re-browsing through a bunch of the builds on here and I was coming to the same conclusion. Thanks for you advice and I am going to take it. It can never be too strong.

VA72C10 · 07-19-2008, 08:27 PM

Great looking build. Following to learn some things

19stepSide72 · 08-07-2008, 05:07 PM

I need more info.....feed me!! Nice looking truck.

**Hart_Rod** · 08-08-2008, 05:47 PM

John - the truck looks great! Gotta love a lowered stepper,

.

VA72C10 · 08-08-2008, 08:45 PM

Any more pics since the notch? Trying to decide if it's worth it to do it since i'm not going to modify my steel bed floor.

AJohn6 · 08-09-2008, 04:15 PM

Sorry fellas, no new updates. I have been working some insane hours and I haven't had a day off in quite some time. In fact I just got home from work and I have to work tomorrow. I haven't touched the notch yet although I did start wiring the valves and compressor up. I would suggest doing a notch I just would do one so you can get it an inch or two lower. The pic below shows how low it can go with factory bumps stops and no notch.

I hope that helps

thirdstreettito · 08-19-2008, 08:26 AM

Lookin low! Now ya gotta get that chin spoiler off and you'll be set!

AJohn6 · 08-19-2008, 01:48 PM

Yeah, the air dam is off, I just don't have any pictures of it yet...

I'm stuck back down in FL now dealing with a little wind and rain from Tropical storm Fay. Maybe one day I will get to work on it again.

AJohn6 · 09-01-2008, 02:04 PM

After working for about a month straight I finally got a weekend off, heck it was a three day weekend. It feels like summer break when I was in school, freakin awesome.

Well I had done some work to it during the evenings so I was able to get a lot done this weekend. I got the Watts link almost done and the bed put on to figure out what and where I need to trim. I had to trim more than I had wanted to to get it to sit down without hitting the tire. I wish now I had got the backspacing that I had wanted it would have made things a ton easier. It still rubs when fully laid out put I really can't trim any more out of it so I guess it will do for now.

AJohn6 · 09-01-2008, 02:06 PM

Here a couple pics as low as it will go.

kyull67 · 09-01-2008, 02:09 PM

Looks great with the rear all the way down! I can't wait to bag mine.

d10s69c10 · 11-25-2008, 09:38 PM

looks good man nice clean welds. very smart to put down the 2" welds before the final bead.

as im sure i stated before be careful with the impacts nowadays.

AJohn6 · 11-28-2008, 05:14 PM

I got the bed put back on for good now. Watts link is insatlled (let's hope it works) and now all I need to do is get the front shocks mounted, replace front brakes lines, get it aligned and I think it will be good to drive, at least for a little while.

c10addict · 11-28-2008, 05:21 PM

Nothing beats black and chrome....

cflvulcan · 11-29-2008, 11:05 AM

do you have any issues with the front tires hitting the hood hinges? in the pics of it aired out, it looks like the rear of the hood is up...

AJohn6 · 11-29-2008, 12:10 PM

Quote:

Originally Posted by cflvulcan

do you have any issues with the front tires hitting the hood hinges? in the pics of it aired out, it looks like the rear of the hood is up...

To anwer your question... Yes, they hit the inner portion of the fender. The hood did that before but not that bad. I am still trying to figure out what I am going to do with it. As of now, I don't have any wheel wells and I don't like driving trucks without them. Makes it tough to keep the motor clean. So when I finally am able to take time off of work I am going to fab up some new wheel wells and hood hinges while I am at it. But that probably won't happen until late Feb.

Adam

AJohn6 · 12-30-2008, 10:03 PM

I started on the inner wheel wells yesterday. i really didn't make a lot of progress but I did get it to where the tires don't hit when the truck is aired out. I am trying to figure out now if I am going to use the original wheel wells after some modifying or if I should make some. Hmmm, what to do?

07-04-2008, 11:39 AM	#1
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step Well, I got a bit more done yesterday. I got the airlines ran, and the rear shocks mounted. A piece of advice for all you newbies out there like myself, don't do any plasma cutting around freshly ran airlines... DOH! Also, the fitting that was in the left front bag was leaking. I had to remove the upper plate since I just couldn't get it to stop leaking. Once I replaced the fitting it was all good. Attached Images __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

07-04-2008, 03:05 PM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Re: Project Step Aside, 1971 SWB/Step I have the clear ones on the botton link they are ok but how do yours look at night lit up? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-04-2008, 04:55 PM	#3
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step Frenchblue72, i guess it depends on what you are looking for. I don't really care for them because you can see the bulb at night. Thats why I like the non "Euro" ones. I will see if i can get a couple pic's of it when it gets dark out, let you be the judge. __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

07-04-2008, 07:34 PM	#4
wildchild Registered User Join Date: Apr 2007 Location: okla Posts: 22	Re: Project Step Aside, 1971 SWB/Step your truck looks awesome i hope my 70 looks that clean some day if you are looking online for parts check out kennys trucks in tulsa if you cant find what your looking for try calling him its not a real big shop but he can suprize you most of his stuff is cheaper than anyone else ive found

07-04-2008, 09:33 PM	#5
FREEMAN70 Registered User Join Date: Apr 2007 Location: robbins Posts: 73	Re: Project Step Aside, 1971 SWB/Step man this truck is sweet, hope mine turns out half as good as this one. man i would like to maybe check it out sometime.

07-11-2008, 10:26 PM	#6
d10s69c10 Built 4 Speed Join Date: May 2008 Location: Geneva FL Posts: 619	Re: Project Step Aside, 1971 SWB/Step VERY VERY SICK BUILD! i want the same thing on my fleetside... but if i may say one thing welder to welder i now the wieght of the truck is being held in front of your Frame notch. It would take a whole lot of wieght in the back to bend it but just 2 cents would be to box the spot where you notched it on the inside and possibly run a 1/4-3/8 flat gusset on the outside just to make sure nothing goes wrong. done alot of gusseting on lowriders (hydraulics) and the brunt force tears these things apart. __________________ 1969 C/10 Short Box: 496/T-56 in worx. "To Be Old And Wise, First You Must Be Young And Stupid"

07-11-2008, 11:13 PM	#7
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Project Step Aside, 1971 SWB/Step Looking good Mang __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

07-13-2008, 11:12 AM	#8
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,305	Re: Project Step Aside, 1971 SWB/Step Now thats a saweeet truck, I cant wait to see how it sits. good job man! I am ordering the same wheels and want to see how they fit when aired out.

07-19-2008, 08:27 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Step Aside, 1971 SWB/Step Great looking build. Following to learn some things

08-07-2008, 05:07 PM	#11
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Project Step Aside, 1971 SWB/Step I need more info.....feed me!! Nice looking truck.

08-08-2008, 05:47 PM	#12
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Project Step Aside, 1971 SWB/Step John - the truck looks great! Gotta love a lowered stepper, . __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-08-2008, 08:45 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Step Aside, 1971 SWB/Step Any more pics since the notch? Trying to decide if it's worth it to do it since i'm not going to modify my steel bed floor.

08-09-2008, 04:15 PM	#14
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step Sorry fellas, no new updates. I have been working some insane hours and I haven't had a day off in quite some time. In fact I just got home from work and I have to work tomorrow. I haven't touched the notch yet although I did start wiring the valves and compressor up. I would suggest doing a notch I just would do one so you can get it an inch or two lower. The pic below shows how low it can go with factory bumps stops and no notch. I hope that helps Attached Images __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

08-19-2008, 08:26 AM	#15
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Project Step Aside, 1971 SWB/Step Lookin low! Now ya gotta get that chin spoiler off and you'll be set! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

08-19-2008, 01:48 PM	#16
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step Yeah, the air dam is off, I just don't have any pictures of it yet... I'm stuck back down in FL now dealing with a little wind and rain from Tropical storm Fay. Maybe one day I will get to work on it again. __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.



Register or Log In To remove these advertisements.

09-01-2008, 02:04 PM	#17
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step After working for about a month straight I finally got a weekend off, heck it was a three day weekend. It feels like summer break when I was in school, freakin awesome. Well I had done some work to it during the evenings so I was able to get a lot done this weekend. I got the Watts link almost done and the bed put on to figure out what and where I need to trim. I had to trim more than I had wanted to to get it to sit down without hitting the tire. I wish now I had got the backspacing that I had wanted it would have made things a ton easier. It still rubs when fully laid out put I really can't trim any more out of it so I guess it will do for now. Attached Images __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

09-01-2008, 02:06 PM	#18
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step Here a couple pics as low as it will go. Attached Images __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

09-01-2008, 02:09 PM	#19
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Project Step Aside, 1971 SWB/Step Looks great with the rear all the way down! I can't wait to bag mine. __________________ The first '67 The current '67 '63 Biscayne Last edited by kyull67; 09-01-2008 at 02:09 PM.

11-25-2008, 09:38 PM	#20
d10s69c10 Built 4 Speed Join Date: May 2008 Location: Geneva FL Posts: 619	Re: Project Step Aside, 1971 SWB/Step looks good man nice clean welds. very smart to put down the 2" welds before the final bead. as im sure i stated before be careful with the impacts nowadays. __________________ 1969 C/10 Short Box: 496/T-56 in worx. "To Be Old And Wise, First You Must Be Young And Stupid"

11-28-2008, 05:14 PM	#21
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step I got the bed put back on for good now. Watts link is insatlled (let's hope it works) and now all I need to do is get the front shocks mounted, replace front brakes lines, get it aligned and I think it will be good to drive, at least for a little while. Attached Images __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

11-28-2008, 05:21 PM	#22
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project Step Aside, 1971 SWB/Step Nothing beats black and chrome.... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

11-29-2008, 11:05 AM	#23
cflvulcan Registered User Join Date: Sep 2005 Location: Utica, NY Posts: 315	Re: Project Step Aside, 1971 SWB/Step do you have any issues with the front tires hitting the hood hinges? in the pics of it aired out, it looks like the rear of the hood is up...

12-30-2008, 10:03 PM	#25
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Project Step Aside, 1971 SWB/Step I started on the inner wheel wells yesterday. i really didn't make a lot of progress but I did get it to where the tires don't hit when the truck is aired out. I am trying to figure out now if I am going to use the original wheel wells after some modifying or if I should make some. Hmmm, what to do? Attached Images __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

Register or Log In To remove these advertisements.