![]() |
![]() |
#51 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
More pictures
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#52 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
Still more
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#53 |
Registered User
Join Date: Feb 2013
Location: Lakeside Ariz
Posts: 445
|
Re: Just another old truck.
nice work. Do you have any pic of where the fender seam is? Where you made the cut for the tilt. Thanks Rich
|
![]() |
![]() |
![]() |
#54 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
So thats all done. Now to put it together and hope that my problem is taken care of. I'll install later today when its a little cooler outside. I'll post how it goes after test driving it. Thanks for taking the time to read this.
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#55 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: Just another old truck.
Nice fab work.
Kim |
![]() |
![]() |
![]() |
#56 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
Hi again Rich, There's a picture of the fender cut back at post #37. Hope that's what you were asking. Still have more parts to fab but that's the fun part.
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#57 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
Hello Kim57, Thank you.
Earl
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#58 |
Registered User
Join Date: Aug 2012
Location: Salem Mo
Posts: 652
|
Re: Just another old truck.
I really enjoy the homemade fabrication.
And I thought I was the only one drilling a couple hundred holes to achieve the one piece I need. ![]() Looking good, Jim |
![]() |
![]() |
![]() |
#59 |
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: Just another old truck.
Just goes to show how a guy can make nice parts without a bunch of fancy tools. Nice work Earl!
![]() Last edited by mknittle; 06-09-2013 at 12:52 AM. |
![]() |
![]() |
![]() |
#60 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
Stepside Jim, No you are not alone in that department. I use my drill press a lot. On this side of the fence I'm glad to read that someone else does the same thing. Thanks.
mknittle Thanks. It may be more work but its almost always worth the effort. This should fix my sensitive feeling I have at the steering wheel. Earl
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#61 |
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: Just another old truck.
A guy with the talent can do more with a hacksaw and a file than a guy with no talent can do with a entire machine shop and years of experience!
|
![]() |
![]() |
![]() |
#62 |
Registered User
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,646
|
Re: Just another old truck.
Nice job. Did the stabilizer help? I have the same add-on p/s setup you have and I've thought all along that it needs a stabilizer.
|
![]() |
![]() |
![]() |
#63 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
First, some pictures of the stabilizer installed. The hardest part of the install was getting under the truck like a turtle on his back and then finding myself saying "Where's that darn wrench?" and then wiggling back out. Yup, it's right where I left it. It's a good thing I can still wiggle a little. I just think of it as my exercise for the day.
mknittle, Thank you. Russell A. Thanks. Yes the stabilizer did help. A lot. It took the big squirrel down to a little chipmunk. It was time and money well spent. Time wise, about 6 1/2 hrs to make parts and install. Got the stabilizer from Auto Zone for $29.99. In the instructions on how to install the P/S box etc I think adding the stabilizer should be added. I've read a lot of the pros and cons for this add on and at this moment I have no problem with it. More miles on the road will tell me what I want to know.
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#64 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Just another old truck.
nice work on the frame and front end tilt.
you really need to invest in a $9 harbor freight 4 1/2 inch grinder and cutoff wheels you could cut brackets like that in minutes
__________________
cool, an ogre smiley ![]() how to put your truck year and build thread into your signature shop air compressor timer |
![]() |
![]() |
![]() |
#65 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
Hello Ogre, Thanks for the comments. Like a bunch of other guys projects on here its a work in progress. I just had to get it to where I could drive and work on it. That finally happened. I've got a collection of tools from HF and most of the time they get me through my little projects with no problems. I got my second 4 1/2 grinder about a year ago (went from orange to purple cases) and just last week the brushes gave up. The first one I got about 6 yrs or more out of it before it quit. My HF is about 45 miles away so its on my must stop at list next time going that direction. Meanwhile drill and use the
3" air cutoff. Thanks again, I appreciate all the comments and advice given on this thread. There are so many builds to look at in this forum and more everyday. Earl
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#66 |
Registered User
Join Date: Dec 2011
Location: Southern Oklahoma
Posts: 181
|
Re: Just another old truck.
Earl. I was just curious as to what you did with the gap between fenders and hood. Did you just close this up or make spacers?
|
![]() |
![]() |
![]() |
#67 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
Hello papastrk. Right now it has spacers between the hood and fenders. The way I made the tilt does not allow me to bring the fenders back towards the door any more. Design error. But I can adjust the hood back by drilling new holes. I'm not finished yet, I just centered the hood and used 1/4" spacers at the back and 3/16" at the front. I'm sure this will change as I get more of the braces and such built and installed. I just bolted it together so could get him on the street. Its amazing how many times you have to put things together and then take them apart as changes are made.
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#68 |
Registered User
Join Date: Dec 2011
Location: Southern Oklahoma
Posts: 181
|
Re: Just another old truck.
So do you intend to space only at the bolt locations? I thought of doing a tilt frontend is the reason for the questions. I just didn't want to weld seams the full length of the fender/hood gaps with gap fillers. Keep us posted on your progress.
|
![]() |
![]() |
![]() |
#69 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
papastrk, No, I won't be welding the hood to the fenders or filling any body gaps on the front end. I want to keep the body lines and gaps pretty much as they are. Just have to make the bracing to keep the flexing at a minimum when its lifted forward. I've never done this before so it all a learning curve. I just have to decide how big of a curve I want to make it. Good luck on yours if you decide to do it. My back told me I had to do it.
My truck needs a fan shroud so I decided to make his. This also the first time I've worked with fiberglass resin. I just took some ideas from orge and made the rest up as I went along. He's definitely right about the sanding part. And this is just a small project.
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#70 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
I used 1/4" copper tubing that came off my swamp cooler this year.
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#71 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
Next
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#72 |
Registered User
Join Date: Feb 2013
Location: Grants Pass Oregon
Posts: 474
|
Re: Just another old truck.
And one more time. Now I'll install and take it for a test drive. Darn I hate that part.
__________________
You have to have patiences or you'll be one. |
![]() |
![]() |
![]() |
#73 |
Registered User
Join Date: Apr 2009
Location: Chandler AZ
Posts: 750
|
Re: Just another old truck.
Love your ingenuity.
|
![]() |
![]() |
![]() |
#74 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: Just another old truck.
That came out real nice.
Kim |
![]() |
![]() |
![]() |
#75 |
Registered User
Join Date: Feb 2013
Location: Lakeside Ariz
Posts: 445
|
Re: Just another old truck.
That should work out great. Nice
Rich |
![]() |
![]() |
![]() |
Bookmarks |
|
|