Parting 1971 Suburban (NM) - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ozark Tim · 03-04-2009, 04:17 PM

O.K. I appreciate that and know what you mean.

I have an open 3:07 diff I would send you so you could have your rolling chassis without the posi. Just swap the ring gear off your posi and place it on my open diff (I said I need it but that isnt so) and re mount it. Ive done it many times w/o any issues at all.

If so just send me a p.m. and we can work it out.

Thanks,
Tim

**Hart_Rod** · 03-05-2009, 11:22 AM

Quote:

Originally Posted by Ozark Tim

O.K. I appreciate that and know what you mean.

I have an open 3:07 diff I would send you so you could have your rolling chassis without the posi. Just swap the ring gear off your posi and place it on my open diff (I said I need it but that isnt so) and re mount it. Ive done it many times w/o any issues at all.

If so just send me a p.m. and we can work it out.

Thanks,
Tim

PM Sent, bttt.

Kansas Tinner · 03-05-2009, 09:01 PM

Hi. Could you show a pick of the back bumper please. Thanks.

NPilot1975 · 03-09-2009, 08:57 PM

That looks about right. The cab is actually visually rust free. I will have to see once I start stripping it. How is the dash, is it AC? If you start cutting the burb up, I think the 2 patch panels I need would end up being pretty small.

**Hart_Rod** · 03-09-2009, 09:19 PM

Quote:

Originally Posted by NPilot1975

That looks about right. The cab is actually visually rust free. I will have to see once I start stripping it. How is the dash, is it AC? If you start cutting the burb up, I think the 2 patch panels I need would end up being pretty small.

Non ac dash. Radio has been cut for the new style radio. It will be easier for me to cut it across the rockers and roof. I can bring it when I come this fall.

**Hart_Rod** · 03-11-2009, 08:28 AM

bump

jorgensensc · 03-11-2009, 08:56 AM

sent you a PM.

**Hart_Rod** · 03-12-2009, 09:11 AM

bttt

**hotrodmtodd** · 03-12-2009, 10:48 PM

Yes Rob, thanks for asking. I could use the suicide knob on the steering wheel..........hehe I will wait to see whats left and clean up the scraps like I always do. Talk to you soon my friend, Mike

mdunn · 03-12-2009, 11:04 PM

Do you still have the rear hatch latches? I need the two that bolt to the side of the top for the rear hatch to latch to for my 72 Blazer. Thanks for your help.

**Hart_Rod** · 03-13-2009, 11:01 AM

Quote:

Originally Posted by hotrodmtodd

Yes Rob, thanks for asking. I could use the suicide knob on the steering wheel..........hehe I will wait to see whats left and clean up the scraps like I always do. Talk to you soon my friend, Mike

You saw that, huh?! That was the first thing I pulled off,

. I'm not sure if I'm going to use it yet, if I don't I'll let you know. I'm getting ready to start chopping the Burb up in a couple of weeks, so send me your wish list,

. Take care.

Quote:

Originally Posted by mdunn

Do you still have the rear hatch latches? I need the two that bolt to the side of the top for the rear hatch to latch to for my 72 Blazer. Thanks for your help.

Are you talking about 1 or 2? Let me know.
..
..

mdunn · 03-13-2009, 08:51 PM

Looks like the Burbs rear hatch mechanism is different than the Blazers. I was thinking they were the same. It would look something more like #2, but I can not see it that well. Sorry, maybe I am confused on the interchangability. Sorry for the confusion.

**Hart_Rod** · 03-13-2009, 09:06 PM

Quote:

Originally Posted by mdunn

Looks like the Burbs rear hatch mechanism is different than the Blazers. I was thinking they were the same. It would look something more like #2, but I can not see it that well. Sorry, maybe I am confused on the interchangability. Sorry for the confusion.

Here's a better picture:

.

vectorit · 03-14-2009, 12:39 PM

PM sent

mdunn · 03-14-2009, 07:12 PM

Thank you very much for the better picture. I can clearly see these are not the same as the Blazer. Thanks again for your time and help.

jeremiah king · 03-14-2009, 11:07 PM

Hi Im in need of a good set of rear door panels for 3rd door and ds rear non door. how are yours? shipping to 92025?

**Hart_Rod** · 03-15-2009, 09:01 AM

Quote:

Originally Posted by vectorit

PM sent

PM returned.

Quote:

Originally Posted by mdunn

Thank you very much for the better picture. I can clearly see these are not the same as the Blazer. Thanks again for your time and help.

No worries. I'm sure someone on the board has what you need.

Quote:

Originally Posted by jeremiah king

Hi Im in need of a good set of rear door panels for 3rd door and ds rear non door. how are yours? shipping to 92025?

Passenger side is good. Someone cut a 4" corner off of the drivers side,

. The part that is cut off is behind the seat and hard to see. Let me know.

**Hart_Rod** · 03-16-2009, 08:29 AM

ttt

Number98 · 03-16-2009, 02:44 PM

Just a friendly bump for ya Rob.......

ChuckDriver · 03-16-2009, 04:14 PM

Do you still have the rear wheel well inner tubs?

JJ

**Hart_Rod** · 03-16-2009, 05:22 PM

Quote:

Originally Posted by ChuckDriver

Do you still have the rear wheel well inner tubs?

JJ

Yes, what all do you need?

R/

ChuckDriver · 03-16-2009, 10:18 PM

Would like to get the inner wheel well that bolts to the floor. It can be cut from the outer at the factory seam. I want to use them to mini-tub my 57 short bed.
Thanks,
Johnny

**Hart_Rod** · 03-21-2009, 10:37 AM

Quote:

Originally Posted by Number98

Just a friendly bump for ya Rob.......

Thanks, see anything you need...............................

.

**Hart_Rod** · 03-22-2009, 11:57 AM

ttt

*project 67 sub* · 03-23-2009, 01:47 AM

what kind of shape is the 3rd door lower hinge in,(the one with the limit strap) any pics? and if good how much and shipped to 92404 possibly? mine is missing the strap, and has stuck and broken off roll pins in it.

03-04-2009, 04:17 PM	#1
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Parting 1971 Suburban (NM) O.K. I appreciate that and know what you mean. I have an open 3:07 diff I would send you so you could have your rolling chassis without the posi. Just swap the ring gear off your posi and place it on my open diff (I said I need it but that isnt so) and re mount it. Ive done it many times w/o any issues at all. If so just send me a p.m. and we can work it out. Thanks, Tim

03-05-2009, 09:01 PM	#3
Kansas Tinner Registered User Join Date: Mar 2009 Location: Derby, Kansas Posts: 11	Re: Parting 1971 Suburban (NM) Hi. Could you show a pick of the back bumper please. Thanks.

03-09-2009, 08:57 PM	#4
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Parting 1971 Suburban (NM) That looks about right. The cab is actually visually rust free. I will have to see once I start stripping it. How is the dash, is it AC? If you start cutting the burb up, I think the 2 patch panels I need would end up being pretty small. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

03-11-2009, 08:28 AM	#6
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Parting 1971 Suburban (NM) bump __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-11-2009, 08:56 AM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Parting 1971 Suburban (NM) sent you a PM. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

03-12-2009, 09:11 AM	#8
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Parting 1971 Suburban (NM) bttt __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-12-2009, 10:48 PM	#9
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: Parting 1971 Suburban (NM) Yes Rob, thanks for asking. I could use the suicide knob on the steering wheel..........hehe I will wait to see whats left and clean up the scraps like I always do. Talk to you soon my friend, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

03-12-2009, 11:04 PM	#10
mdunn Registered User Join Date: Sep 2008 Location: Marysville, OH Posts: 119	Re: Parting 1971 Suburban (NM) Do you still have the rear hatch latches? I need the two that bolt to the side of the top for the rear hatch to latch to for my 72 Blazer. Thanks for your help. __________________ 1972 Blazer CST 4x4

03-13-2009, 08:51 PM	#12
mdunn Registered User Join Date: Sep 2008 Location: Marysville, OH Posts: 119	Re: Parting 1971 Suburban (NM) Looks like the Burbs rear hatch mechanism is different than the Blazers. I was thinking they were the same. It would look something more like #2, but I can not see it that well. Sorry, maybe I am confused on the interchangability. Sorry for the confusion. __________________ 1972 Blazer CST 4x4

03-14-2009, 12:39 PM	#14
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Parting 1971 Suburban (NM) PM sent __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

03-14-2009, 07:12 PM	#15
mdunn Registered User Join Date: Sep 2008 Location: Marysville, OH Posts: 119	Re: Parting 1971 Suburban (NM) Thank you very much for the better picture. I can clearly see these are not the same as the Blazer. Thanks again for your time and help. __________________ 1972 Blazer CST 4x4

03-14-2009, 11:07 PM	#16
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: Parting 1971 Suburban (NM) Hi Im in need of a good set of rear door panels for 3rd door and ds rear non door. how are yours? shipping to 92025?

03-16-2009, 08:29 AM	#18
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Parting 1971 Suburban (NM) ttt __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-16-2009, 02:44 PM	#19
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: Parting 1971 Suburban (NM) Just a friendly bump for ya Rob.......

03-16-2009, 04:14 PM	#20
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,622	Re: Parting 1971 Suburban (NM) Do you still have the rear wheel well inner tubs? JJ



Register or Log In To remove these advertisements.

03-16-2009, 10:18 PM	#22
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,622	Re: Parting 1971 Suburban (NM) Would like to get the inner wheel well that bolts to the floor. It can be cut from the outer at the factory seam. I want to use them to mini-tub my 57 short bed. Thanks, Johnny

03-22-2009, 11:57 AM	#24
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Parting 1971 Suburban (NM) ttt __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-23-2009, 01:47 AM	#25
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Parting 1971 Suburban (NM) what kind of shape is the 3rd door lower hinge in,(the one with the limit strap) any pics? and if good how much and shipped to 92404 possibly? mine is missing the strap, and has stuck and broken off roll pins in it. Last edited by project 67 sub; 03-23-2009 at 01:50 AM.

Register or Log In To remove these advertisements.