|
09-17-2004, 09:51 AM | #1 |
Registered User
Join Date: Jul 2003
Posts: 33
|
63 k10 For Sale
__________________
454 fleet http://www.picturetrail.com/fatboy63k10 |
09-17-2004, 10:24 AM | #2 |
Registered User
Join Date: Dec 1999
Location: san diego, ca
Posts: 546
|
One old.
One new (without 1" body lift).
__________________
'70 K-20 San Diego, CA |
09-23-2004, 03:36 PM | #3 |
Registered User
Join Date: Jul 2004
Location: Spanish Springs, NV
Posts: 1,171
|
Mine too
More & Better pics soon. -Dave
__________________
2003 Silverado K1500 Z71 - Arrival Blue 1973 K5 Cheyenne Blazer 350/TH350/NP203 Kids Trucks:92 K1500 Blazer 5.7/700R4 4" lift. RETIRED: 1980 Scottsdale 4x4 Founding Member: "TILT WHEEL BELLY." Club |
09-23-2004, 05:43 PM | #4 |
Registered User
Join Date: Nov 2002
Location: santa cruz cali
Posts: 118
|
my 68 gmc k2500
it has a 70 over 454 (469ci) SRP slugs, scat 4340 I beam rods, GM forged steel crank, all internaly balanced 781 heads with 2.19"/1.88" fierro stainless undercut swirl polished valves, ported exhaust ports, gasket matched intake and polished chambers. Crane cams 272 duration cam w/ matching springs and harland sharp 1.8 ratio roller rockers. edelbrock rpm air gap w/ an eldy 750 cfm carb. AN stuff used for the fuel system. should be breaking it in in a few days (rewireing the dash right now and fitting an aliminum radiator)
__________________
1968 gmc 3/4 4x4 longbed. built 469 700r4 (needs a th400 REAL SOON!), 14bolt ff rear 73 3/4 dana 44 1970 chevelle all wheel disc, tubular rear control arms tall spindle swap up front matching #'s 350 work in Progress |
09-30-2004, 06:44 PM | #5 |
Geared for Collision
Join Date: Jan 2004
Location: St. Louis, Mo.
Posts: 683
|
needs a little tweaking still but heres a pic of mine.
__________________
MEMBER OF THE 4 WHEEL DISK BRAKE CLUB 1970 C/K20 3/4 Ton 1996 Collectors Edition Corvette 1977 Corvette Coupe |
10-07-2004, 09:24 PM | #6 |
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Here's my blazer.....
__________________
GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 12-27-2004 at 06:43 PM. |
10-30-2004, 06:33 PM | #7 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Here's a couple more of mine:
70 C20 on a 71 K20 chassis: 70 K25:
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
11-08-2004, 02:44 PM | #8 |
Red Headed Step Child
Join Date: Oct 2003
Location: Atlanta, GA
Posts: 1,216
|
Here's mine.
__________________
"Dinner, the perfect break between work and drunk" -Homer Simpson |
11-19-2004, 04:14 PM | #9 |
Registered User
Join Date: Nov 2004
Location: North Carolina
Posts: 18
|
My wifes grandfathers '87 SWB |
11-23-2004, 01:38 AM | #10 |
Registered User
Join Date: Aug 2002
Location: mass
Posts: 1,277
|
man, what a great guy.
post some pics and keep us updated with whatever you do. dont you have a website? |
11-29-2004, 06:18 PM | #11 |
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
my other one
i don't think iput a picture of this up yet so here ya go
Ryan |
12-14-2004, 12:43 AM | #12 |
FUJIMO
Join Date: Dec 2004
Location: South Dakota
Posts: 127
|
it don't set high but is a 4x4
__________________
IF IT DON'T GO--CHROME IT!! I dont mind confusion, I create it! |
12-14-2004, 01:05 PM | #13 |
SWB 4x4 Collector
Join Date: Jun 2001
Location: Osage City, KS
Posts: 5,155
|
gmc71k20 I have just a few other pics right now. I can tell you a few details about it. We took a '85 lwb frame and stretched it 10 inches, got rid of I believe 4" front and back of the frame, and got rid of all of the stock body mounts. We fabricated our own body mounts to the frame so that the truck would look right and not a cobbled up job. I think so far it has turned out sweet. We just got done painting the frame and test fit the cab to the mounts and it fits perfect and the wheelwells line up center to center just right. we put the bed on to get an idea of where the mounts need to be for it (easy part). I go back Thursday to my hometown to work on it. Plans over my xmas break are to get the divorced transfer mounted in a custom crossmember and the rest of the running gear installed. Then comes the axles which will really raise the truck about 2-4 more inches because in the pics of course they aren't in there but my dad said that where the axle meets the leaf springs needs to go up about a couple more inches. I can't wait to get home and see it..... I have been up here at school and my dad test fit everything last sunday. Drivetrain: 454, th400 out of 2wd to mate to the 205 divorce tc (the reduction of the driveshaft angles) axles: dana 60 front, corporate 14 w/ disc conversion rear, 44" boggers on 16.5 x 14 weld super single. Edit: has 14 inch 73-87 suspension lift and homemade 2-4" body (so the body would bolt up)
(this other pic isn't quite right... it was takin before my dad got everything level, but does show almost how tall it is ... a lil bit short but not much.... dad says somewhere around 45 inches to the bottom of the rockers when we put the axles on it) I will keep posting pics of the project if no one minds) Trevor
__________________
TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 12-14-2004 at 01:07 PM. |
12-20-2004, 10:27 PM | #14 |
Registered User
Join Date: Apr 2004
Location: San Fernando Valley (Los Angeles) CA
Posts: 41
|
My WORKHORSE
Ive had my 77 since 81 . 3 motors buried, and the 4th going strong ! Very close to 700, 000 miles !!!
__________________
77 Chevy K-20 Some engine Tweaks ! 64 C-10 Shes crunched, But a new cab will will come along soon 87 Z28 Fuel injected 350 Didnt need a car, but couldent resist !! Last edited by ch4x477; 12-20-2004 at 11:03 PM. |
01-02-2005, 06:48 AM | #15 |
Registered User
Join Date: Mar 2000
Location: San Diego, CA USA
Posts: 344
|
Heres my 72 short fleet....
http://img.photobucket.com/albums/v3.../gorman804.jpg http://img.photobucket.com/albums/v3...e/Gorman04.jpg http://img.photobucket.com/albums/v3...gorman2003.jpg http://img.photobucket.com/albums/v3.../Gorman704.jpg
__________________
--------- 72 SWB K10 San Diego CA |
01-06-2005, 02:15 PM | #16 |
Registered User
Join Date: Jan 2005
Location: WA
Posts: 3
|
|
01-07-2005, 03:47 PM | #17 |
Registered User
Join Date: Jan 2005
Location: Ohio
Posts: 171
|
hey
Hey im new the the site and theres trucks I am in the process of restoring a 72 chevy. Here are the pics.
Also Redneck Motorsports where did you get that front bumper?Iv been looking for one similar to that one for a while. Thanks,Jesse |
01-08-2005, 12:01 AM | #18 |
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
My Baby's
Heres my 1981 Chevy K-5 Blazer. It's got a 4" SkyJacker Suspension lift, 35"x12.50"x15" BFGoodrich M/T's, rebuilt Turbo 350 Tranny, worn out 305 motor that some day is going to be a beefed up 400 SB. Thrush Turbo GlassPacks with Dual Exhaust.
Heres my 1988 Chevy C1500 3/4 LongBox Pick-Up. It's got a F.I. 350 with Hooker Headers and about 5'-6' of Straight Piped Exhaust, 32"x10.50"x15" Wild Country tires. Lund SunVisor, IFS up front. Last edited by Hoods69BadBowTie; 01-08-2005 at 12:05 AM. |
01-13-2005, 08:46 PM | #19 |
Registered User
Join Date: Jan 2005
Location: SARASOTA,FLORIDA
Posts: 67
|
here is my beast
ITS A 67 (SMALL WINDOW) WITH A 70 FRONT CLIP,4"LIFT,33 HOOSIERS,350,SM465,203,FLOWMASTERS,HEI,MILD CAM,4;11'S
__________________
The Garage 1970 stepside 4 x 4 2005 caddy deville 1998 dodge 2500 diesel 2006 h-d street glide 1948 h-d rigid Last edited by Mudder; 07-23-2005 at 10:43 AM. |
01-31-2005, 10:57 AM | #20 |
Did someone say MUD?
Join Date: Aug 2003
Location: Pullman,WA
Posts: 1,089
|
[IMG][/IMG]
Here's a quick pic of my 78 3/4...Later Mike
__________________
Im in the market guys...so keep ya eyes peeled -------------------- Mini trucks are for guys who cant get it up! |
02-03-2005, 08:02 AM | #21 |
Registered User
Join Date: Dec 2004
Location: Gypsum Kansas 67448
Posts: 1,681
|
heres a couple of mine
__________________
21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343 |
02-06-2005, 04:13 PM | #22 |
Registered User
Join Date: Apr 2000
Location: Oneonta, NY, US
Posts: 103
|
What my truck looked like when I got it with working plow and rack.
Now she is stripped.
__________________
Jeff '69 GMC K2500 LWB, '74 350/SM465/Rockwell T-221, cnD44/ffD60, 3.73 gears, 31" BFG's (originally had 305ci V-6) '05 VW golf '84 HD Sportster XLX '68 GMC K2500 parts beast |
02-13-2005, 10:51 AM | #23 |
Registered User
Join Date: Feb 2005
Posts: 12
|
Here's one of mine.
|
02-13-2005, 02:57 PM | #24 |
Account Suspended
Join Date: Apr 2004
Location: N.C. high country
Posts: 6,107
|
Here my burb 6 inch lift H2 wheels and 35's pro comp mun terrains..
|
02-17-2005, 07:28 PM | #25 |
'71 Chevy Blazer
Join Date: Jan 2005
Location: San Leandro, CA (near Oakland)
Posts: 96
|
here's mine... as i bought it... i haven't had time or money yet to do anything to it...
__________________
'71 K5 Blazer (new project / daily driver) "If you are not working to improve the situation, you have no business complaining" |
Bookmarks |
|
|