I'm legit now, and I want your powdercoating business - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Eddie H. · 02-16-2009, 09:33 PM

Where is your shop located at in Springtown?
I work in that area a couple of times a month.
I will have a pair of valve covers to get coated in the near future.

Good luck with your business venture. You might try passing out some cards at the Decatur swap meet this weekend to drum up some business.

Tx Firefighter · 02-16-2009, 09:37 PM

I will be out at Decatur buying all the core parts I can so I can get an exchange program going for common 67-72 truck parts.

1956cameo · 02-16-2009, 10:01 PM

Looks like you do impecible work and at a fair price. I will definately be keeping you in mind when I get to the powedercoating phase of my project. Are you going to set up a booth at Pate or any of the other swap meets this year?. Good luck with the business!

FOREVER71 · 02-17-2009, 12:13 AM

i have some various column brackets and core support corner brackets. i could send ya just to add to your stock pile....let me know if ya need them.

OLDIRON69 · 02-18-2009, 12:56 PM

Can you do pot metal? If so I have a bunch of small pieces I need done.

69swbman · 02-18-2009, 02:51 PM

is your place on 199 ive seen on here ur trucks and them see em on 199 from peaster

Tx Firefighter · 02-18-2009, 04:27 PM

Quote:

Originally Posted by OLDIRON69

Can you do pot metal? If so I have a bunch of small pieces I need done.

No problem. I just lay down a coat of primer powder before the color.

Quote:

Originally Posted by 69swbman

is your place on 199 ive seen on here ur trucks and them see em on 199 from peaster

I have a rent house on 199 that I go by pretty often, and I use a post office box in Poolville, so I'm through there almost daily.

R.L. · 02-18-2009, 06:20 PM

Congratulations man if I can use you I will.

**Hart_Rod** · 02-19-2009, 12:15 AM

Do you have any pictures of "chromed" aluminum?

NuBomb · 02-20-2009, 01:08 AM

I haven't seen where it has been asked yet, but can exhaust manifolds be powdercoated and does it last? If they can, then what colors are available. Thanks and good luck.

Tx Firefighter · 02-20-2009, 06:57 AM

Quote:

Originally Posted by Hart_Rod

Do you have any pictures of "chromed" aluminum?

Quote:

Originally Posted by NuBomb

I haven't seen where it has been asked yet, but can exhaust manifolds be powdercoated and does it last? If they can, then what colors are available. Thanks and good luck.

Hart_Rod, here is a picture of the ultimate chrome I use a lot of. It's as close as you can get in powder. The required clear coat tends to mute the chrome effect. This is a steel substrate obviously, but aluminum looks the same.

NuBomb, yes, there are high temperature powders. Here is a link to my supplier and their color selection of hi-temp powders.

http://www.powderbuythepound.com/cat...hp?cPath=46_86

**Hart_Rod** · 02-20-2009, 09:07 AM

Quote:

Originally Posted by Tx Firefighter

Hart_Rod, here is a picture of the ultimate chrome I use a lot of. It's as close as you can get in powder. The required clear coat tends to mute the chrome effect. This is a steel substrate obviously, but aluminum looks the same.

Thanks for the pictures. What are your thoughts about spraying the clear over polished aluminum, such as headlight buckets?

Tx Firefighter · 02-20-2009, 08:03 PM

Quote:

Originally Posted by Hart_Rod

Thanks for the pictures. What are your thoughts about spraying the clear over polished aluminum, such as headlight buckets?

I'm happy to do it, but I will be straight up, the clear powder will mute the sheen. I have talked personally to the manager of my powder supplier about their recomendations, and bought several different kinds of clear powder, but there is no denying it, the parts looks super until you clear them and then they loose a noticeable amount of sheen.

In the P/C biz, there are a lot of guys selling uncleared chrome powder. With just the chrome, the sheen is unbelievable. It absolutely stands shoulder to shoulder with true chrome. But, in the long run, the metallic element of the chrome powder will begin to dull and tarnish due to exposure. For long term longevity, you must clear the chrome. If I didn't, I couldn't stand behind my work or look myself in the mirror.

3quartertime · 02-20-2009, 08:17 PM

Do you have any pics of coated exhaust manifolds? How durable is the powder?

BTW your parts look great! Do you ever travel to the DFW Love field area? I may be able to get some parts down there randomly.

*b-rad* · 02-20-2009, 09:10 PM

tx how much for 4 door hinges,2 hood hinges,2 door striker in black

shiped from 31313

Tx Firefighter · 02-20-2009, 10:31 PM

Quote:

Originally Posted by b-rad

tx how much for 4 door hinges,2 hood hinges,2 door striker in black

shiped from 31313

Just blast and coat the door hinges or rebuild them too ? You sending me your parts to work ?

*b-rad* · 02-20-2009, 11:01 PM

do a rebuild on them if u thank they need them

can u get something close to this light aqua

Tx Firefighter · 02-20-2009, 11:09 PM

I'm near color blind in some shades. Here is my supplier and their selections of colors. Tell me if you see one you think is a close match.

https://o13.hostbaby.com/powderbuyth...om/powder.html

*b-rad* · 02-20-2009, 11:15 PM

this is the best i could do lol

skip the the door parts how much just for the hood hinges

**wesmigletz** · 02-23-2009, 12:50 AM

Tx Firefighter, I got the door and hood latches you did for me in the near chrome finish. The powder coating was beautiful. I'll be sending more parts your way.

Thanks again,

Wes

Blue_71 · 02-23-2009, 02:24 AM

Tx firefighter,

i have a set of "nerf" (step) bars that are chrome. Can they be powdercoated in white? i'm afraid the powder wont stick to the chrome.

if it will stick, how much to coat two step bars, and two tripod mirror mounts?

Andy4639 · 02-23-2009, 03:15 AM

Can you do the ramhorns so that I don't have to grind them smooth just blast them good.
This color.
RAL 7024 GRAPHITE GREY

Can you put a filler on them to smooth them out?

Tx Firefighter · 02-23-2009, 06:44 AM

Quote:

Originally Posted by Blue_71

Tx firefighter,

i have a set of "nerf" (step) bars that are chrome. Can they be powdercoated in white? i'm afraid the powder wont stick to the chrome.

if it will stick, how much to coat two step bars, and two tripod mirror mounts?

Powdering chrome is no problem. A huge majority of powdercoating work is coating chrome Harley parts. The coater just has to be diligent and etch the chrome very well with the blasting process.

Quote:

Originally Posted by Andy4639

Can you do the ramhorns so that I don't have to grind them smooth just blast them good.
This color.
RAL 7024 GRAPHITE GREY

Can you put a filler on them to smooth them out?

I'm happy to do ramshorns. I blast them very clean prior to coating them. As far as the filler, I don't know of any filler powder that will withstand the heat. It would just be a cleaned, coated version of your current manifolds, pits would still be there.

Andy4639 · 02-23-2009, 07:33 AM

I guess I have to grind them then!

my67chevytruck · 02-23-2009, 09:08 AM

Quote:

Originally Posted by Tx Firefighter

I'm happy to do ramshorns. I blast them very clean prior to coating them. As far as the filler, I don't know of any filler powder that will withstand the heat. It would just be a cleaned, coated version of your current manifolds, pits would still be there.

Kevin,

Do you suggest me going over my ramhorns with a flapdisk prior to sending them to you for PC then ?

02-16-2009, 09:33 PM	#51
Eddie H. Registered User Join Date: Mar 2001 Location: Paradise TX USA Posts: 1,200	Re: I'm legit now, and I want your powdercoating business Where is your shop located at in Springtown? I work in that area a couple of times a month. I will have a pair of valve covers to get coated in the near future. Good luck with your business venture. You might try passing out some cards at the Decatur swap meet this weekend to drum up some business. __________________ "Negative people always seem to have a problem for every solution"

02-16-2009, 09:37 PM	#52
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm legit now, and I want your powdercoating business I will be out at Decatur buying all the core parts I can so I can get an exchange program going for common 67-72 truck parts. __________________ I'm on the Instagram- @Gearhead_Kevin

02-16-2009, 10:01 PM	#53
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: I'm legit now, and I want your powdercoating business Looks like you do impecible work and at a fair price. I will definately be keeping you in mind when I get to the powedercoating phase of my project. Are you going to set up a booth at Pate or any of the other swap meets this year?. Good luck with the business!

02-17-2009, 12:13 AM	#54
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: I'm legit now, and I want your powdercoating business i have some various column brackets and core support corner brackets. i could send ya just to add to your stock pile....let me know if ya need them.

02-18-2009, 12:56 PM	#55
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: I'm legit now, and I want your powdercoating business Can you do pot metal? If so I have a bunch of small pieces I need done. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

02-18-2009, 02:51 PM	#56
69swbman Registered User Join Date: Jun 2007 Location: peaster,tx Posts: 59	Re: I'm legit now, and I want your powdercoating business is your place on 199 ive seen on here ur trucks and them see em on 199 from peaster

02-18-2009, 06:20 PM	#58
R.L. Registered User Join Date: Sep 2008 Location: Mobile, Al. Posts: 687	Re: I'm legit now, and I want your powdercoating business Congratulations man if I can use you I will.

02-19-2009, 12:15 AM	#59
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: I'm legit now, and I want your powdercoating business Do you have any pictures of "chromed" aluminum? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-20-2009, 01:08 AM	#60
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	Re: I'm legit now, and I want your powdercoating business I haven't seen where it has been asked yet, but can exhaust manifolds be powdercoated and does it last? If they can, then what colors are available. Thanks and good luck. __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.

02-20-2009, 08:17 PM	#64
3quartertime My Mistress the Sea Join Date: Feb 2005 Location: Bradenton, FL. Posts: 412	Re: I'm legit now, and I want your powdercoating business Do you have any pics of coated exhaust manifolds? How durable is the powder? BTW your parts look great! Do you ever travel to the DFW Love field area? I may be able to get some parts down there randomly. __________________ *,,,they'd look alot better as beer cans...* '71 K20 350/350 Rusty but trusty... gone '70 C20... gone '88 K1500... gone '90 C1500... gone '91 C2500... gone '95 C3500 6.5L Dually love this one!...

02-20-2009, 09:10 PM	#65
b-rad Account Suspended Join Date: Nov 2007 Location: FT STEWART GA Posts: 509	Re: I'm legit now, and I want your powdercoating business tx how much for 4 door hinges,2 hood hinges,2 door striker in black shiped from 31313

02-20-2009, 11:01 PM	#67
b-rad Account Suspended Join Date: Nov 2007 Location: FT STEWART GA Posts: 509	Re: I'm legit now, and I want your powdercoating business do a rebuild on them if u thank they need them can u get something close to this light aqua Attached Images Last edited by b-rad; 02-20-2009 at 11:03 PM.

02-20-2009, 11:09 PM	#68
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm legit now, and I want your powdercoating business I'm near color blind in some shades. Here is my supplier and their selections of colors. Tell me if you see one you think is a close match. https://o13.hostbaby.com/powderbuyth...om/powder.html __________________ I'm on the Instagram- @Gearhead_Kevin

02-20-2009, 11:15 PM	#69
b-rad Account Suspended Join Date: Nov 2007 Location: FT STEWART GA Posts: 509	Re: I'm legit now, and I want your powdercoating business this is the best i could do lol skip the the door parts how much just for the hood hinges Attached Images

02-23-2009, 12:50 AM	#70
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: I'm legit now, and I want your powdercoating business Tx Firefighter, I got the door and hood latches you did for me in the near chrome finish. The powder coating was beautiful. I'll be sending more parts your way. Thanks again, Wes __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz



Register or Log In To remove these advertisements.

02-23-2009, 03:15 AM	#72
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: I'm legit now, and I want your powdercoating business Can you do the ramhorns so that I don't have to grind them smooth just blast them good. This color. RAL 7024 GRAPHITE GREY Can you put a filler on them to smooth them out? __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-23-2009, 07:33 AM	#74
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: I'm legit now, and I want your powdercoating business I guess I have to grind them then! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Register or Log In To remove these advertisements.