![]() |
![]() |
#51 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Before I get this painted I still have a few things to do. Replacing the pins and hinges today and putting in the new roller pins. I couldn't get the roller pin to drive in to save my life so we had to improvise once again. I used total automotive's hinge kit after seeing so many issues with doormans.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#52 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Got the doors done and the old dash ready to pull. I'm calling it a day, it's hot out there!
![]()
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#53 |
Registered User
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
|
Re: 97 3500 454 4x4 project
Looking good, back around post 22, you mentioned the door speakers. What did you do about the rears. Also how do the rear covers come off, I am looking to do mine and don't want to break them.
Are you removing the rear upper overloads? Thanks |
![]() |
![]() |
![]() |
#54 |
Registered User
Join Date: Aug 2012
Location: Northeast KS
Posts: 1,778
|
Re: 97 3500 454 4x4 project
man you are killing it in this heat in our part of the world!
__________________
1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop |
![]() |
![]() |
![]() |
#55 | |
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: 97 3500 454 4x4 project
Quote:
Example: ![]() ![]()
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
![]() |
![]() |
![]() |
#56 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
LOL, if it doesn't kill me first. I've worked two 72 hour work weeks back to back so I've not done much on the truck, but I'll be back on it Monday. Hope the humidity gives me a break.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#57 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
The rear pillars have a few screws and clips that hold them on. Just go slow and you'll be fine with the clips. I was sweating bullets with mine, but thankfully didn't break anything. And I'm keeping the overloads too.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#58 | |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Quote:
I like the idea of bigger speakers in the rear doors.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
|
![]() |
![]() |
![]() |
#59 | |
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: 97 3500 454 4x4 project
Quote:
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
![]() |
![]() |
![]() |
#60 | |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Quote:
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
|
![]() |
![]() |
![]() |
#61 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Old dash out. Had to put the defrost and air doors back in place since they were out on one side. The defrost door wasn't even hooked to the control arm. Took the air box apart so I could clean it out while i was there too.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#62 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Took the better part of the day, but the new dash is in and plugged up. I've got the rest of the components cleaned and bagged so it should go pretty quick from here.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#63 |
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: 97 3500 454 4x4 project
Oh, crap, I forgot to mention...that dash pocket, you have to swap the airbag for the pocket while the dash is out. There are two (pretty much unreachable) fasteners at the top that require either Subaru spark plug hands or dash out.
Nice and clean looking dash!
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
![]() |
![]() |
![]() |
#64 |
Registered User
Join Date: May 2016
Location: Ohio
Posts: 274
|
Re: 97 3500 454 4x4 project
The square on the transmission tunnel for manual transmissions...Is it just a raised stamped area or is it a removable plate from the factory?
__________________
1972 K10 1986 K30 crew cab dually 2002 Z06 2007 Escalade |
![]() |
![]() |
![]() |
#65 | |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Quote:
I took the original dash' s harness out and placed it in the new dash. I washed all the duct work out when I did that as well. Oh, and my wife's car is a subaru legacy. The 454 in my truck has loads of room to work compared to that for sure!
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
|
![]() |
![]() |
![]() |
#66 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
When I get in from work tomorrow I'll check for you. I have a factory auto and manual so I can check both and see if there's a difference.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#67 |
Registered User
Join Date: May 2016
Location: Ohio
Posts: 274
|
Re: 97 3500 454 4x4 project
Cool thanks! I've had some of both in the past but never tore into any of them.
__________________
1972 K10 1986 K30 crew cab dually 2002 Z06 2007 Escalade |
![]() |
![]() |
![]() |
#68 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Looking at the auto truck I'm gonna say no. It has a place for the shifter stamped in the hump, but it's not bolted on or cut out.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#69 | |
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: 97 3500 454 4x4 project
Quote:
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
![]() |
![]() |
![]() |
#70 |
Registered User
Join Date: May 2016
Location: Ohio
Posts: 274
|
Re: 97 3500 454 4x4 project
OK thanks. That's what it looked like but I couldn't tell for sure.
__________________
1972 K10 1986 K30 crew cab dually 2002 Z06 2007 Escalade |
![]() |
![]() |
![]() |
#71 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
I've been searching relentlessly for a leak on my passenger side. Took the cowl cover off and all ran water all through it with no water in the cab. Went to my windshield, same result.
Finally looked at my cab lights saw a crack in 1 and wala! Water in the cab! Also found the plug in back of my compressor off so i hooked it up and I've got air now too.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#72 |
Registered User
Join Date: May 2016
Location: Ohio
Posts: 274
|
Re: 97 3500 454 4x4 project
Two easy fixes. Can't beat that.
Posted via Mobile Device
__________________
1972 K10 1986 K30 crew cab dually 2002 Z06 2007 Escalade |
![]() |
![]() |
![]() |
#73 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
Got my parking brake cables swapped out, they were different lengths than the crew cab, and the luggage rack off the roof. I want a clean roof other than the clearance lamps. Last pic before paint is on and the bed too. The bed is already there and the truck will be in just a bit. Have a great labor day weekend all.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#74 |
Registered User
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
|
Re: 97 3500 454 4x4 project
what's the condition under the clearance lights?
Looking good so far. |
![]() |
![]() |
![]() |
#75 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Re: 97 3500 454 4x4 project
They weren't bad at all really, just a few minor spots of pitting. I've already ordered new lamps and seals for it as well.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
Bookmarks |
|
|