68 c10 GOES WIDE!!!!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 08-19-2009, 09:49 AM

Quote:

Originally Posted by Shaky

That thing is mental.

Is that a 12-bolt behind the 606?

Not for long . . ....

Quote:

Originally Posted by soala70

love to know what they narrowed the rearend to

It looks like it's possibly stock width w/offset wheels. If narrowed, it's not by much (maybe 2" per side??) because of where the truck arms mount.

**FRENCHBLUE72** · 08-19-2009, 10:00 AM

Does this guy have a 606 tree out back that he is pickin these motors from..... Nice toys....

Blitz · 08-19-2009, 11:01 AM

I wonder if the Lambo wheels would fit a C-10.

Wait...of course they do! ANYTHING fits with funds like that! Ok so now I just wonder what they'd look like.

monte0185 · 08-19-2009, 11:06 AM

My question is WHAT does a person do to be able to afford those toys???? Id give my left nut for just one of those motors!!

prostreetC-10 · 08-19-2009, 11:16 AM

If I do say so myself.....I don't think his craftmanship can touch mine!!! LOL!!!

It took me hours and hours and hours to get my bed to have that natural "rust" look......but the airbrush came through!

Blitz · 08-19-2009, 11:41 AM

^^^ Too d@m funny.

big_al_71 · 08-19-2009, 12:51 PM

Quote:

Originally Posted by monte0185

My question is WHAT does a person do to be able to afford those toys???? Id give my left nut for just one of those motors!!

My understanding is that he owns a boat dealership in the florida keys....
It is named Plantation Marina is what my buddy told me..The guy is super cool according to my buddy and he is NOT a show off he has a garage of Bad Ass rides for his own enjoyment not to front them.

big_al_71 · 08-19-2009, 12:52 PM

Quote:

Originally Posted by prostreetC-10

If I do say so myself.....I don't think his craftmanship can touch mine!!! LOL!!!

It took me hours and hours and hours to get my bed to have that natural "rust" look......but the airbrush came through!

Definetly his is almost as good as yours !!!!

big_al_71 · 08-19-2009, 12:57 PM

From looking at how his vehicles are built I hardly doubt that the 12 bolt rear end in the truck is anywhere near stock. It might be the stock housing but I am pretty sure it is a Fully Built 12 bolt to hold the torque from that "606" just saying..

prostreetC-10 · 08-19-2009, 12:58 PM

Thanks Al.

I have a very unsuccessful Earth worm farm that funds all of my toys!!

72_cheyenne · 08-19-2009, 06:03 PM

Is that a 18''/20'' wheel combo on the red 68'??

Hoffman65burb · 08-19-2009, 07:10 PM

I love em

Quote:

Originally Posted by nuke1

OMG I can not control where my blood is going at the moment, wow that is nice!

AHAHAHAHA

Scott Webster · 08-19-2009, 08:59 PM

606 MONSTER... Drooling (doing my best Homer Simpson impression). That would be cool in anything!

yellowGT · 08-19-2009, 10:38 PM

Quote:

Originally Posted by big_al_71

A friend of a friend of mine emailed him picts of his 68C10 that he bought and decided to go wide and low with it..I dont know many of the details on the truck other than it is a 68 with a 606 cubic inch with big chief heads, seriously out of control show truck according to my buddy. This guy lives in the Florida Keys and is supposed to have some real serious cars. Anyhow I was amazed at how nice this truck is so he forwarded me some picts of it ans I thought I would share with you guys and gals.
My friend is going to see If we can arrange to go see this guys collection in the near future and if i get to go I will sure take lots of picts specially the 68

If he is putting those fat azz wheels on there...see if he will sell the ones that came off the truck.

big_al_71 · 08-20-2009, 10:58 AM

I will have my friend ask him..about the wheels.

msgross · 08-20-2009, 11:12 AM

oh no, Al is going to change his truck again I bet!!!

nice ride..

Mordachai · 08-20-2009, 11:56 AM

that's very cool... thanks for sharing.

my67chevytruck · 08-20-2009, 01:15 PM

nice rides. thanks for sharing Al!

MT71c-10 · 08-21-2009, 10:59 PM

Holy crap and s--t. FREEKING SWEET!!!!

DZL1 · 08-22-2009, 12:59 AM

I am speechless.....

DZL1.

Jacfourteen · 08-22-2009, 01:17 AM

is that nitrous I spotted on the camaro in post #44? The 606 isn't enough by itself? Damn, that would be fun though!

sighlurr · 08-22-2009, 01:25 AM

Holy balls!

Speechless.

big_al_71 · 08-22-2009, 11:03 AM

Quote:

Originally Posted by msgross

oh no, Al is going to change his truck again I bet!!!

nice ride..

lol@ Mike
I am not redoing this truck anymore..However I am looking for a 67 or 68 so stay tuned!!!

westbrookw · 08-22-2009, 11:44 AM

Awesome rides! I need money. A lot of inspirationn here.

**Hart_Rod** · 08-22-2009, 11:44 AM

Quote:

Originally Posted by big_al_71

lol@ Mike
I am not redoing this truck anymore..However I am looking for a 67 or 68 so stay tuned!!!

I know where a real solid one (or two) is hanging out................

.

08-19-2009, 10:00 AM	#52
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: 68 c10 GOES WIDE!!!!! Does this guy have a 606 tree out back that he is pickin these motors from..... Nice toys.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-19-2009, 11:01 AM	#53
Blitz Mr. Thread Killer Join Date: Dec 2008 Location: Norcross, GA Posts: 388	Re: 68 c10 GOES WIDE!!!!! I wonder if the Lambo wheels would fit a C-10. Wait...of course they do! ANYTHING fits with funds like that! Ok so now I just wonder what they'd look like.

08-19-2009, 11:06 AM	#54
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: 68 c10 GOES WIDE!!!!! My question is WHAT does a person do to be able to afford those toys???? Id give my left nut for just one of those motors!! __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

08-19-2009, 11:16 AM	#55
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: 68 c10 GOES WIDE!!!!! If I do say so myself.....I don't think his craftmanship can touch mine!!! LOL!!! It took me hours and hours and hours to get my bed to have that natural "rust" look......but the airbrush came through! Attached Images __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

08-19-2009, 11:41 AM	#56
Blitz Mr. Thread Killer Join Date: Dec 2008 Location: Norcross, GA Posts: 388	Re: 68 c10 GOES WIDE!!!!! ^^^ Too d@m funny.

08-19-2009, 12:57 PM	#59
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 c10 GOES WIDE!!!!! From looking at how his vehicles are built I hardly doubt that the 12 bolt rear end in the truck is anywhere near stock. It might be the stock housing but I am pretty sure it is a Fully Built 12 bolt to hold the torque from that "606" just saying.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-19-2009, 12:58 PM	#60
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: 68 c10 GOES WIDE!!!!! Thanks Al. I have a very unsuccessful Earth worm farm that funds all of my toys!! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

08-19-2009, 06:03 PM	#61
72_cheyenne Registered User Join Date: Dec 2008 Location: San Antonio Texas Posts: 57	Re: 68 c10 GOES WIDE!!!!! Is that a 18''/20'' wheel combo on the red 68'?? __________________ Red Chevy's

08-19-2009, 08:59 PM	#63
Scott Webster Sheetmetal Psycho Join Date: May 2005 Location: athens PA Posts: 515	Re: 68 c10 GOES WIDE!!!!! 606 MONSTER... Drooling (doing my best Homer Simpson impression). That would be cool in anything! __________________ I didn't say you were stupid, but I was thinking it... I need a check up from the neck up! Project "Rigginstine's Monster" 1971 C-10 longbed 355/4spd Future mods: 67 front clip Webby's Rigginations - where everything has potential!

08-20-2009, 10:58 AM	#65
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 68 c10 GOES WIDE!!!!! I will have my friend ask him..about the wheels. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-20-2009, 11:12 AM	#66
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 c10 GOES WIDE!!!!! oh no, Al is going to change his truck again I bet!!! nice ride.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-20-2009, 11:56 AM	#67
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: 68 c10 GOES WIDE!!!!! that's very cool... thanks for sharing. __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

08-20-2009, 01:15 PM	#68
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 68 c10 GOES WIDE!!!!! nice rides. thanks for sharing Al! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

08-21-2009, 10:59 PM	#69
MT71c-10 Too many toys,not enough money Join Date: May 2008 Location: Bozeman,MT Posts: 237	Holy crap and s--t. FREEKING SWEET!!!!

08-22-2009, 12:59 AM	#70
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 702	Re: 68 c10 GOES WIDE!!!!! I am speechless..... DZL1.



Register or Log In To remove these advertisements.

08-22-2009, 01:17 AM	#71
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: 68 c10 GOES WIDE!!!!! is that nitrous I spotted on the camaro in post #44? The 606 isn't enough by itself? Damn, that would be fun though! __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

08-22-2009, 01:25 AM	#72
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 68 c10 GOES WIDE!!!!! Holy balls! Speechless.

08-22-2009, 11:44 AM	#74
westbrookw LET'S GO...MOUNTAINEERS Join Date: Oct 2007 Location: Williamstown, WV Posts: 339	Re: 68 c10 GOES WIDE!!!!! Awesome rides! I need money. A lot of inspirationn here. __________________ 72 SWB/Step

Register or Log In To remove these advertisements.