MN Parting 1971 Ochre C20 Custom Deluxe

[ZackD1212]

Right Passenger side dash(defrost) vent and the tubing for it?
door to cab rubber seals any good?

[CATCHALLBLUE]

:thumb: really appreciate it! I'll let you know.

[Jake1971]

Originally Posted by Vintage Windmills

I will look on sunday, wont be free until then. I have other q jets, do you know what numbers are good?

The number on my q-jet is 7044218 hope this helps

[Vintage Windmills]

Ok guys, I am home and working on this truck dismantling again.

Originally Posted by amashal

I'll take the proportioning valve for $20. PM me payment info and I'll send payment today. Thanks.

Shipped USPS today, thanks!

Originally Posted by CATCHALLBLUE

Howdy Jud,

Get a chance to look at that pushrod?

Mine measures 2.5" long, and is about 3/8" diameter, is that right?

Originally Posted by ScottH

Looking for the fuel line from tank sending unit to under the cab.

Thks
Scott

Scott, Still needing one? If so, let me check it out tonight or tomorrow night

Originally Posted by ZackD1212

Right Passenger side dash(defrost) vent and the tubing for it?
door to cab rubber seals any good?

Tubing is junk, vent would be $15 shipped

Originally Posted by Jake1971

The number on my q-jet is 7044218 hope this helps

I will check out a couple here and let you know

Jud

[ScottH]

Still need one, appreciate u checking, no hurry on my end.

Thanks

[Vintage Windmills]

Originally Posted by Jake1971

The number on my q-jet is 7044218 hope this helps

Carb is 7041208, truck was running/driving before he spun a bearing or whatever is wrong with engine

[Jake1971]

Originally Posted by Vintage Windmills

Carb is 7041208, truck was running/driving before he spun a bearing or whatever is wrong with engine

Carburetor #7041208 does not have the 1/4 inch threaded hole in the back for my power brakes so it will not work. I am still interested in the front frame crossmember which can be found directly underneath the crankshaft pulley on our trucks pending Price including shipping to 78602?

[Vintage Windmills]

Originally Posted by ScottH

Still need one, appreciate u checking, no hurry on my end.

Thanks

Scott, this one has some rust on the outside where it goes through the floor, I'm sure it still works but you could probably find a better one? I can get photos if still interested

Originally Posted by Jake1971

Carburetor #7041208 does not have the 1/4 inch threaded hole in the back for my power brakes so it will not work. I am still interested in the front frame crossmember which can be found directly underneath the crankshaft pulley on our trucks pending Price including shipping to 78602?

Let me check the other three q jets I have here.

[Vintage Windmills]

Originally Posted by Jake1971

Carburetor #7041208 does not have the 1/4 inch threaded hole in the back for my power brakes so it will not work. I am still interested in the front frame crossmember which can be found directly underneath the crankshaft pulley on our trucks pending Price including shipping to 78602?

Ok, the other carbs won't work. You could do like this 71 C20 was and run the booster from the manifold threaded hold 2" behind the carb?
On just the crossmember, I'd do $40 shipped.

[ScottH]

Is it the style that screws into the sending unit? how much would u need for it? pic would be good whenever u get a chance.

Thanks

[CATCHALLBLUE]

Jud,

I didnt receive an email about the pushrod.

jame_bucci@yahoo.com

[CATCHALLBLUE]

not sure why cant edit posts but......

thats an under score between the 2 names _

thanks

[Vintage Windmills]

Originally Posted by CATCHALLBLUE

not sure why cant edit posts but......

thats an under score between the 2 names _

thanks

did it come through now?

Jud

[CATCHALLBLUE]

Originally Posted by Vintage Windmills

did it come through now?

Jud

Yes. Got it thank you. Im going to post the picture and ask the forums advice whether they think it will work for my setup.

[Jake1971]

Originally Posted by Vintage Windmills

Ok, the other carbs won't work. You could do like this 71 C20 was and run the booster from the manifold threaded hold 2" behind the carb?
On just the crossmember, I'd do $40 shipped.

I will take the crossmember. PM payment info please.

I am going with a 4.3 v6 vortec from a '89 GMC Safari and the q-jet intake does not have that vacuum port. Thanks for checking.

[Seanext]

Do you have the clutch linkage for sale if so how much shipped to 28034

[Vintage Windmills]

Originally Posted by Jake1971

I will take the crossmember. PM payment info please.

I am going with a 4.3 v6 vortec from a '89 GMC Safari and the q-jet intake does not have that vacuum port. Thanks for checking.

Pm sent

Originally Posted by Seanext

Do you have the clutch linkage for sale if so how much shipped to 28034

what all pieces do need? just the z bar and rod? Piece that goes through firewall?

[Jake1971]

Payment sent for crossmember. Thanks! Paul.

[Seanext]

I need from the clutch pedal all the way to the throw out bearing arm

[Vintage Windmills]

Originally Posted by Jake1971

Payment sent for crossmember. Thanks! Paul.

Got it, thanks Paul!

Originally Posted by Seanext

I need from the clutch pedal all the way to the throw out bearing arm

Do you need whole the pedal mechanism that bolts up under the dash? Or just starting with the rod that runs through the firewall?

[Seanext]

I have the pedal box just starting at the rod down

[kenn]

Hello I need a carb for my 72 c10 and I think the 7041208 will work if its still available. If its not do you have one that will? Thanks

[Vintage Windmills]

Originally Posted by Seanext

I have the pedal box just starting at the rod down

Got it, $40 shipped for rod that exits firewall, Zbar (belcrank), and rot that pushes on throwout arm with bevel nut.

Originally Posted by kenn

Hello I need a carb for my 72 c10 and I think the 7041208 will work if its still available. If its not do you have one that will? Thanks

Let me look at a 70 parts truck I have here.

[Seanext]

I will take the clutch parts how do you want to be paid?

[Seanext]

Just sent you a money via PayPal with address. Sent 45.00 to cover fees. Let me know if you don't receive the PayPal monies.
Thanks,
Melvin