Slow Progress is better than No Progress. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Beach-Burban · 11-07-2023, 07:41 PM

Quote:

Originally Posted by nsiti

Sorry to hear. Getting stranded is the worst. Have you contacted Edelbrock customer support to get their feedback?

Good call nsiti, but I was first doing my due diligence by checking the things they might ask me about…and as it turned out, the Tech really knows his stuff and identified the issue very quickly. It was a faulty MAP Sensor (so I replaced this one with a quality “Made in the USA” one!)…and being out of range prevented the trigger signal to the injectors from being sent, so they weren’t squirting! He’s also going to help me dial-in the system after I get another 50 miles or so on it!

Woody

nsiti · 11-07-2023, 09:39 PM

Quote:

Originally Posted by Beach-Burban

Good call nsiti, but I was first doing my due diligence by checking the things they might ask me about…and as it turned out, the Tech really knows his stuff and identified the issue very quickly. It was a faulty MAP Sensor (so I replaced this one with a quality “Made in the USA” one!)…and being out of range prevented the trigger signal to the injectors from being sent, so they weren’t squirting! He’s also going to help me dial-in the system after I get another 50 miles or so on it!

Woody

Glad to hear. Did the faulty MAP sensor come with the Pro Flow kit? Are they replacing it under warranty?

Cheers,
Nick

Beach-Burban · 11-08-2023, 08:12 AM

Quote:

Originally Posted by nsiti

Glad to hear. Did the faulty MAP sensor come with the Pro Flow kit? Are they replacing it under warranty?

Cheers,
Nick

Thanks Nick…I’m relieved the fix was something that was readily available, plus I learned something!

Yes…the AC/Delco was pre installed on the throttle body when I received the kit, but I don’t actually know if it would be under warranty? That’s something I’ll look into after the Tech helps me finish with the “Advanced Tuning”…as he’s not the person that would be making that call (but I’ll gather any intel about it along the way!).

Nick…Did you ever receive your Pro Flo 4 system, or did you cancel that order?

Woody

**HO455** · 11-08-2023, 02:29 PM

Great to hear that tech support actually provided support. Fingers crossed on the warranty side.

nsiti · 11-08-2023, 09:29 PM

Quote:

Originally Posted by Beach-Burban

Thanks Nick…I’m relieved the fix was something that was readily available, plus I learned something!

Yes…the AC/Delco was pre installed on the throttle body when I received the kit, but I don’t actually know if it would be under warranty? That’s something I’ll look into after the Tech helps me finish with the “Advanced Tuning”…as he’s not the person that would be making that call (but I’ll gather any intel about it along the way!).

Nick…Did you ever receive your Pro Flo 4 system, or did you cancel that order?

Woody

Hi, I did receive my Pro Flo 4, not long after you. I recall that it was extremely delayed due to covid. The supply chain was seriously disrupted. My cynical mind wonders whether there will be a greater level of defects for items built during that period.

My restoration build is in the final stages of bodywork, of which I've been posting photos and brief commentary in the build section of this forum. Hopefully the engine and efi installation wil commence in a couple of months.

Keep us updated on your progress!

Nick

**kev2809** · 06-02-2024, 07:56 PM

maybe this is what your looking for? I'm doing the same process and can't stand it! rather find a good used one

https://67-72chevytrucks.com/vboard/...=771928&page=7

**HO455** · 06-02-2024, 08:05 PM

Quote:

Originally Posted by kev2809

maybe this is what your looking for? I'm doing the same process and can't stand it! rather find a good used one

https://67-72chevytrucks.com/vboard/...=771928&page=7

YES! Thank you. For the life of me I just couldn't find it.

**kev2809** · 06-02-2024, 08:16 PM

no problem!

ya I flip back and forth to kind of guide me, it's a big help

Beach-Burban · 06-02-2024, 08:40 PM

Thank you to Kev2809 and HO455 for the joint effort in finding the thread detailing the hatch repair…although now I’m quite frightened regarding the amount of skilled labor involved! I have no skill in fabrication and must now put out the feelers to find someone that I can trust (and afford???). Thanks again, guys!

Woody

PS…and many thanks to KFF 1 for documenting the tedious process he endured so that others could benefit!

Beach-Burban · 08-21-2024, 04:27 PM

During the last three months, I have been jumping from one project to another (and then another)…and we all know that isn’t an efficient way to get things done! To sum things up, I’ve made no progress with the EFI system because I shifted into the rear hatch issues. On top of that, my woodworking buddy Bob (who is in the process of “sort of” retiring) finished enough of his contracted work to jump on-board with my “Woody-Style” headliner project. With his tremendous amount of knowledge, we have made a lot of progress (but are still a ways from completion). I am committed to finishing the headliner before switching back to the other issues…except for finding a metal worker for the hatch. I have received a lead in the right direction for that…but a friend has to present it to him at the right time so as to not scare him away! In the meanwhile, please except a few pictures of the “in-progress” woodwork!

Woody

Individual panels of American Hickory.
Name: IMG_4467.jpg
Views: 103
Size: 51.8 KB

Name: IMG_4467.jpg
Views: 103
Size: 51.8 KB

A milled cap covers the gap between the panels.
Name: IMG_4469.jpg
Views: 98
Size: 33.9 KB

Working around the overhead A/C cover has been a challenge!
Name: IMG_4478.jpg
Views: 104
Size: 82.4 KB

CG · 08-21-2024, 05:15 PM

That is going to be awesome! Keep at it!

**LockDoc** · 08-21-2024, 09:40 PM

-
Yep, I like it....

.

Beach-Burban · 08-22-2024, 10:16 AM

Quote:

Originally Posted by LockDoc

-
Yep, I like it....

.

Thanks, Leon…it will be nice to check this off my list!

Woody

**HO455** · 08-21-2024, 10:28 PM

Ohhh that's going to be so great! Can't wait to see the finished headliner.

nsiti · 08-22-2024, 04:53 AM

That's beautiful workmanship. I notice some fabric in one of the photos, is that what you're going to back it with?

Beach-Burban · 08-22-2024, 10:26 AM

Quote:

Originally Posted by nsiti

That's beautiful workmanship. I notice some fabric in one of the photos, is that what you're going to back it with?

Bob definitely knows his way around wood…and just about every other type of construction! Yes…the palm tree fabric will be stretched across the hidden side of the individual panels and visible through each of the “black” voids.

Woody

BAD1916 · 08-22-2024, 05:20 PM

Man, that is going to look killer once it’s all wrapped up. Very nice

Beach-Burban · 08-22-2024, 10:21 AM

Quote:

Originally Posted by HO455

Ohhh that's going to be so great! Can't wait to see the finished headliner.

Me too…I need something in the “Win” column! The stain color (not shown, yet) is being applied to the finished pieces right now…and it really brings out the beauty of the hickory (a really hard and stable wood)!

Woody

Beach-Burban · 08-23-2024, 10:37 AM

Quote:

Originally Posted by CG

That is going to be awesome! Keep at it!

Thanks, CG…I’m really trying to get this finished up, but there are a lot of components to the job…and Bob does things the right way even when it takes longer (which I’m happy about!).

Woody

Beach-Burban · 08-27-2024, 04:42 PM

Here’s a couple pictures of the fabric loosely laid over the top of the front panel…not stretched tight or fastened yet. Also a glimpse of the stain color, however, it hasn’t been clear coated yet because I’m still deciding between satin or semi-gloss?

Woody

Name: IMG_4487.jpg
Views: 77
Size: 40.2 KB

Name: IMG_4487.jpg
Views: 77
Size: 40.2 KB

Name: IMG_4490.jpg
Views: 79
Size: 39.1 KB

**LockDoc** · 08-28-2024, 12:45 AM

-
Man, that looks like a lot of labor intensive work. Good job all around.....

.

**Ol Blue K20** · 08-28-2024, 10:41 AM

Quote:

Originally Posted by lockdoc

-
man, that looks like a lot of labor intensive work. Good job all around.....

.

x2

**Ol Blue K20** · 09-14-2024, 03:09 PM

I can't wait to see it finished. I think it going to look great!!

Beach-Burban · 09-15-2024, 02:16 PM

Quote:

Originally Posted by Ol Blue K20

I can't wait to see it finished. I think it going to look great!!

I’m looking forward to that as well, Dale…thanks!

Woody

Beach-Burban · 09-15-2024, 02:20 PM

Here’s my start for the A/C cover vents…not sure where I’m going from here, but at least I have a base to work off of!

Woody

Name: IMG_4506.jpg
Views: 26
Size: 18.5 KB

Name: IMG_4506.jpg
Views: 26
Size: 18.5 KB

Name: IMG_4509.jpg
Views: 27
Size: 41.9 KB

11-08-2023, 02:29 PM	#4
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,276	Re: Slow Progress is better than No Progress. Great to hear that tech support actually provided support. Fingers crossed on the warranty side. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

06-02-2024, 07:56 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Slow Progress is better than No Progress. maybe this is what your looking for? I'm doing the same process and can't stand it! rather find a good used one https://67-72chevytrucks.com/vboard/...=771928&page=7 __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-02-2024, 08:16 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Slow Progress is better than No Progress. no problem! ya I flip back and forth to kind of guide me, it's a big help __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-02-2024, 08:40 PM	#9
Beach-Burban Registered User Join Date: Mar 2019 Location: So. Torrance, CA Posts: 483	Re: Slow Progress is better than No Progress. Thank you to Kev2809 and HO455 for the joint effort in finding the thread detailing the hatch repair…although now I’m quite frightened regarding the amount of skilled labor involved! I have no skill in fabrication and must now put out the feelers to find someone that I can trust (and afford???). Thanks again, guys! Woody PS…and many thanks to KFF 1 for documenting the tedious process he endured so that others could benefit!

08-21-2024, 04:27 PM	#10
Beach-Burban Registered User Join Date: Mar 2019 Location: So. Torrance, CA Posts: 483	Re: Slow Progress is better than No Progress. During the last three months, I have been jumping from one project to another (and then another)…and we all know that isn’t an efficient way to get things done! To sum things up, I’ve made no progress with the EFI system because I shifted into the rear hatch issues. On top of that, my woodworking buddy Bob (who is in the process of “sort of” retiring) finished enough of his contracted work to jump on-board with my “Woody-Style” headliner project. With his tremendous amount of knowledge, we have made a lot of progress (but are still a ways from completion). I am committed to finishing the headliner before switching back to the other issues…except for finding a metal worker for the hatch. I have received a lead in the right direction for that…but a friend has to present it to him at the right time so as to not scare him away! In the meanwhile, please except a few pictures of the “in-progress” woodwork! Woody Individual panels of American Hickory. A milled cap covers the gap between the panels. Working around the overhead A/C cover has been a challenge!

08-21-2024, 05:15 PM	#11
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,989	Re: Slow Progress is better than No Progress. That is going to be awesome! Keep at it! __________________ … … … … … … … … ... … … … … … … … … … … …

08-21-2024, 09:40 PM	#12
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,638	Re: Slow Progress is better than No Progress. - Yep, I like it.... . __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

08-21-2024, 10:28 PM	#14
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,276	Re: Slow Progress is better than No Progress. Ohhh that's going to be so great! Can't wait to see the finished headliner. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-22-2024, 04:53 AM	#15
nsiti Registered User Join Date: May 2022 Location: NY,NY Posts: 76	Re: Slow Progress is better than No Progress. That's beautiful workmanship. I notice some fabric in one of the photos, is that what you're going to back it with?

08-22-2024, 05:20 PM	#17
BAD1916 Registered User Join Date: Oct 2012 Location: VENTURA COUNTY CALIFORNIA Posts: 299	Re: Slow Progress is better than No Progress. Man, that is going to look killer once it’s all wrapped up. Very nice

08-27-2024, 04:42 PM	#20
Beach-Burban Registered User Join Date: Mar 2019 Location: So. Torrance, CA Posts: 483	Re: Slow Progress is better than No Progress. Here’s a couple pictures of the fabric loosely laid over the top of the front panel…not stretched tight or fastened yet. Also a glimpse of the stain color, however, it hasn’t been clear coated yet because I’m still deciding between satin or semi-gloss? Woody

08-28-2024, 12:45 AM	#21
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,638	Re: Slow Progress is better than No Progress. - Man, that looks like a lot of labor intensive work. Good job all around..... . __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

09-14-2024, 03:09 PM	#23
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,242	Re: Slow Progress is better than No Progress. I can't wait to see it finished. I think it going to look great!! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

09-15-2024, 02:20 PM	#25
Beach-Burban Registered User Join Date: Mar 2019 Location: So. Torrance, CA Posts: 483	Re: Slow Progress is better than No Progress. Here’s my start for the A/C cover vents…not sure where I’m going from here, but at least I have a base to work off of! Woody



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.