Project Grande Slam: Coley's Hot Rod Shop - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoNeck · 02-27-2012, 07:53 PM

Quote:

Engine bay detail looks great. What kind of time did you have in it?? Day, 2 days?? Thanks, Fred

Fred - I soaked the engine with a couple of cans of Gunk degreaser and pressure washed it last Monday afternoon. Chad came over on Tuesday and we took everything apart under the hood and inventoried everything. Then some more degreasing, cleaning and scraping. A good coat of Hi-Temp Gray exhaust paint and VHT Chevy orange brightened everything up. We then cleaned and painted all the smaller stuff and replaced things that were worn out.

I re-installed all the stuff we took off today. So, to answer your question, all total... maybe 10-12 man-hours plus 2 cans Chevy Orange, Flat Black, Semi-Gloss, Gloss Black, Grey Hi-Temp and a half dozen rolls of paper towels.

NoNeck

**specialtyretail** · 03-01-2012, 08:07 AM

Amazing difference. I would say both time and money well spent. Great job on it.

CC69Rat · 03-01-2012, 10:25 AM

Thank You brother

CC69Rat · 03-01-2012, 04:17 PM

Dad's at it again !! He picked up this basically new Performer RPM today for $50 bucks. .. Shawn, you aint gettin him man!

shawno72 · 03-01-2012, 05:30 PM

Quote:

Originally Posted by CC69Rat

Dad's at it again !! He picked up this basically new Performer RPM today for $50 bucks. .. Shawn, you aint gettin him man!

Haha I bet if I bring him out here for the CPP show on the 17th

he would be more than happy to come.

NoNeck · 03-01-2012, 09:12 PM

Quote:

Haha I bet if I bring him out here for the CPP show on the 17th he would be more than happy to come.

California HERE I COME!!!!!!

shawno72 · 03-01-2012, 09:21 PM

Quote:

Originally Posted by NoNeck

California HERE I COME!!!!!!

= http://67-72chevytrucks.com/vboard/s...25&postcount=1

And he can have my extra valve cover.

CC69Rat · 03-01-2012, 10:14 PM

Hey ! We gotta get this GMC on the ground first!

Posted via Mobile Device

shawno72 · 03-01-2012, 10:26 PM

Quote:

Originally Posted by CC69Rat

Hey ! We gotta get this GMC on the ground first!

Posted via Mobile Device

Ok Chad fair enough. He was your dad first

Posted via Mobile Device

Gus350 · 03-02-2012, 01:47 PM

Great looking truck can't wait to see it on the ground...

CC69Rat · 03-02-2012, 02:41 PM

Thanks Gus, did you guys get hit with the storms? You ok?
Posted via Mobile Device

CC69Rat · 03-03-2012, 12:38 PM

Just read the casting #'s on the block.. 3970010

Is that not the high nickel block? Man, I hope so!

Posted via Mobile Device

VA72C10 · 03-03-2012, 02:37 PM

yep, high nickel...same block I have.

FRENCHBLUE72 · 03-03-2012, 04:57 PM

Nice score on the gmc looks like she is gonna clean up real well for ya..

CC69Rat · 03-05-2012, 05:35 PM

Just some new pics. We're on to the outside now. I'm probably going to cut and buff it to see if I can bring out some of that natural 'patina'

Naa, the paint is a little checked and has some peel in it. I'm just going to hit it with 2000/2500 wet and some Finesse It on a buffer to see if I can bring it up a little. Just low speed, nothing crazy. I think she will shine up some.

Dad has been cleaning on the interior too. It looks a lot better. Someone tried to fix the wrinkling door panels over the years and screwed some metal plate to the bottom edges of the doors (?) I'll fix that, no prob. It just looks kinda bad right now.

I am going to pick up some decals for the air cleaner just to finish it off. Did they ever make a drop base for this type air cleaner?

Anyway, here she is .. basking in some TN sunshine.

big_al_71 · 03-05-2012, 06:21 PM

Great job Guys!!!!!

Looks awesome....

**lolife99** · 03-05-2012, 09:19 PM

So Nice!
I would love to have that bench seat.

**specialtyretail** · 03-05-2012, 09:46 PM

Looks great...

VA72C10 · 03-05-2012, 10:59 PM

Very nice!!!

**67cheby** · 03-05-2012, 11:27 PM

Nice work !!
Posted via Mobile Device

shawno72 · 03-06-2012, 12:30 AM

Looking nicer with every post. Great job guys.
Posted via Mobile Device

CC69Rat · 03-07-2012, 09:15 AM

Question:

Should I stay around the house for my wife's purse party on Sat. or go to Dad's place and work on the GMC? Humm ..

I'm basically trying to get the GMC running good while the weather is still too bad to paint on the 68. I haven't forgotten about it!

72BlckButy · 03-07-2012, 09:40 AM

I LOVE this truck!!!

Awesome work! You made a great choice on the ECE 4.5/6" drop kit.

CC69Rat · 03-07-2012, 09:46 AM

Thanks for the compliments guys! I really appreciate it

.. just to mention, the firewall was simply wiped down with Simple Green and paper towels. It looks like the original paint (to me) and has not been painted during the detail. It came out really nice. While we had the dist out of it I sat up in the engine bay and wiped it down. (at the same time found the casting numbers on the block

) With a little more love and an altitude adjustment I think it will make a great daily driver I can add a little to here and there.

Dad has been driving around town a little. He said it is doing really good. after the ride home I have a lot of confidence in it already! Pretty stoked about finding it.

72BlckButy · 03-07-2012, 10:28 AM

I would be as well... would love to take it off your hands.

03-01-2012, 08:07 AM	#52
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,635	Re: Project Grande Slam: Coley's Hot Rod Shop Amazing difference. I would say both time and money well spent. Great job on it.

03-01-2012, 10:25 AM	#53
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Thank You brother __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-01-2012, 04:17 PM	#54
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Dad's at it again !! He picked up this basically new Performer RPM today for $50 bucks. .. Shawn, you aint gettin him man! Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-01-2012, 10:14 PM	#58
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Hey ! We gotta get this GMC on the ground first! Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-02-2012, 01:47 PM	#60
Gus350 68 C 10 Join Date: Aug 2010 Location: Advance ,Mo Posts: 554	Re: Project Grande Slam: Coley's Hot Rod Shop Great looking truck can't wait to see it on the ground...

03-02-2012, 02:41 PM	#61
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Thanks Gus, did you guys get hit with the storms? You ok? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-03-2012, 12:38 PM	#62
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Just read the casting #'s on the block.. 3970010 Is that not the high nickel block? Man, I hope so! Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-03-2012, 02:37 PM	#63
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Grande Slam: Coley's Hot Rod Shop yep, high nickel...same block I have. __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-03-2012, 04:57 PM	#64
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project Grande Slam: Coley's Hot Rod Shop Nice score on the gmc looks like she is gonna clean up real well for ya.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-05-2012, 05:35 PM	#65
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Just some new pics. We're on to the outside now. I'm probably going to cut and buff it to see if I can bring out some of that natural 'patina' Naa, the paint is a little checked and has some peel in it. I'm just going to hit it with 2000/2500 wet and some Finesse It on a buffer to see if I can bring it up a little. Just low speed, nothing crazy. I think she will shine up some. Dad has been cleaning on the interior too. It looks a lot better. Someone tried to fix the wrinkling door panels over the years and screwed some metal plate to the bottom edges of the doors (?) I'll fix that, no prob. It just looks kinda bad right now. I am going to pick up some decals for the air cleaner just to finish it off. Did they ever make a drop base for this type air cleaner? Anyway, here she is .. basking in some TN sunshine. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-05-2012, 06:21 PM	#66
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Project Grande Slam: Coley's Hot Rod Shop Great job Guys!!!!! Looks awesome.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-05-2012, 09:19 PM	#67
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Project Grande Slam: Coley's Hot Rod Shop So Nice! I would love to have that bench seat. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-05-2012, 09:46 PM	#68
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,635	Re: Project Grande Slam: Coley's Hot Rod Shop Looks great...

03-05-2012, 10:59 PM	#69
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Grande Slam: Coley's Hot Rod Shop Very nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-05-2012, 11:27 PM	#70
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Grande Slam: Coley's Hot Rod Shop Nice work !! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

03-06-2012, 12:30 AM	#71
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project Grande Slam: Coley's Hot Rod Shop Looking nicer with every post. Great job guys. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-07-2012, 09:15 AM	#72
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Question: Should I stay around the house for my wife's purse party on Sat. or go to Dad's place and work on the GMC? Humm .. I'm basically trying to get the GMC running good while the weather is still too bad to paint on the 68. I haven't forgotten about it! __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-07-2012, 09:40 AM	#73
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project Grande Slam: Coley's Hot Rod Shop I LOVE this truck!!! Awesome work! You made a great choice on the ECE 4.5/6" drop kit. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-07-2012, 09:46 AM	#74
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Project Grande Slam: Coley's Hot Rod Shop Thanks for the compliments guys! I really appreciate it .. just to mention, the firewall was simply wiped down with Simple Green and paper towels. It looks like the original paint (to me) and has not been painted during the detail. It came out really nice. While we had the dist out of it I sat up in the engine bay and wiped it down. (at the same time found the casting numbers on the block ) With a little more love and an altitude adjustment I think it will make a great daily driver I can add a little to here and there. Dad has been driving around town a little. He said it is doing really good. after the ride home I have a lot of confidence in it already! Pretty stoked about finding it. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-07-2012, 10:28 AM	#75
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project Grande Slam: Coley's Hot Rod Shop I would be as well... would love to take it off your hands. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.