72 Suburban Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mulk · 05-06-2011, 07:35 PM

Looking great! That's a proud dog standing guard....

You've been keeping me motivated with this build, and I'm stoked because I got home from work and my air ride parts were waiting for me!

Riveted1 · 05-06-2011, 08:32 PM

In the first pic of the second series of pics you posted yesterday (the one w/the rag on the pass fender), it looks like the burb is dropped? But it looks like that was a pic taken before you put the drop member on the front?

bruin_d · 05-06-2011, 08:42 PM

Quote:

Originally Posted by Riveted1

In the first pic of the second series of pics you posted yesterday (the one w/the rag on the pass fender), it looks like the burb is dropped? But it looks like that was a pic taken before you put the drop member on the front?

That picture was taken with the FRONT drop member on it and the coils removed from the back with the frame resting on the rear end. I just put air in the bags to lift it up off of the ground. This is the new MAX height for the front with no motor or tranny in it. This was before I pulled the rear end/trailing arms out.

bruin_d · 05-06-2011, 08:43 PM

Quote:

Originally Posted by Bigblueburban

I love that color . Nice and low looks great! Can't wait to see where it goes, what motor is that
Posted via Mobile Device

It's a 402.

bruin_d · 05-06-2011, 08:44 PM

Quote:

Originally Posted by Mulk

Looking great! That's a proud dog standing guard....

You've been keeping me motivated with this build, and I'm stoked because I got home from work and my air ride parts were waiting for me!

It's always good do come home to parts at the front door

babylonflyer · 05-06-2011, 09:52 PM

damn bruin !!! put a leash on that dog!! Kickass stuff here

Riveted1 · 05-06-2011, 11:34 PM

Quote:

Originally Posted by bruin_d

That picture was taken with the FRONT drop member on it and the coils removed from the back with the frame resting on the rear end. I just put air in the bags to lift it up off of the ground. This is the new MAX height for the front with no motor or tranny in it. This was before I pulled the rear end/trailing arms out.

Oh ok, makes sense. That's about the ride height I'm looking for on my burb. Guess that's still a bit lower than a 4/6 drop. (Trying to go easy as I want to keep this one on the road and not turn into a major project like my 67 SWB lol)

bruin_d · 05-07-2011, 07:27 PM

LOTS of progress today!!! Notch is all bolted in, frame is cut. Tomorrow I'm going to attack the trailing arm cross member and trailing arms. I want it back on the ground by the end of the weekend.

Riveted1 · 05-07-2011, 07:33 PM

Wow man, you work fast! How are you going to deal with the real wheel tubs and such?

bruin_d · 05-07-2011, 07:37 PM

Quote:

Originally Posted by Riveted1

Wow man, you work fast! How are you going to deal with the real wheel tubs and such?

I'll burn that bridge when I get there...

Honestly, I don't really have a plan. I have a couple ideas in my head but haven't decided yet. The one I'm probably going to go with is to buy a couple tubs from summit or something (they're only like $75 or something) modify them to go over the tires and built a frame and lay some sheetmetal over it. I've been kind of kicking around the idea of building a frame and doing it up real nice with wood instead of metal but we'll see.

bruin_d · 05-08-2011, 08:19 PM

Almost!!! I still need to hack off the trailer hitch on the back and re-make it and pull the stock tranny cross member out before it's ON THE GROUND. Still need a couple parts to completely finish it because my fastener box was missing them but I'm sure Nate will send them out on Monday.

brn agn · 05-08-2011, 09:05 PM

That is great work in a short period of time! It looks awesome!

jmedero · 05-08-2011, 10:34 PM

Well you just made me look like a slacker. 6 months deep.... And still a week away.

Looks killer bro
Posted via Mobile Device

Mulk · 05-09-2011, 10:17 AM

AWESOME

gcburdic · 05-09-2011, 10:56 AM

Nice and low Chief.....who needs a stinking garage to to their suspension work

bruin_d · 05-09-2011, 11:27 AM

Quote:

Originally Posted by gcburdic

Nice and low Chief.....who needs a stinking garage to to their suspension work

Sad part is I have a 24'x24' attached garage and an 18'x24' detached garage. My detached has all of my yard stuff and other projects and my attached is where I park my cars so the Suburban is outside.

bruin_d · 05-11-2011, 07:17 AM

Removed the POS hitch that was on it, installed the panhard bar, and trimmed the front fenders. I still need to do a little more trimming in the back and on the hood. I'm proabably going to take a day or two off. I'm getting a little burned out. The goal is to have the rear bags on, hood hinges done, front shock mounts on, and all shocks on by the end of the weekend.

gcburdic · 05-11-2011, 10:40 AM

Saweet!!!....how's the engine coming?

bruin_d · 05-11-2011, 11:14 AM

Quote:

Originally Posted by gcburdic

Saweet!!!....how's the engine coming?

I haven't spent too much time on it yet. I just tore it down and stripped all of the paint off of it. I ground off all of the tabs and smoothed out the valve covers. Probably going to get to putting it together next week.

Wildstreak · 05-11-2011, 11:29 AM

looking great so far, what type of headers are you running with the bbc and the droppmember?

BlackTopMotors · 05-11-2011, 11:40 AM

Subscribed, man that's nice! I need to take a closer look at how that front cross member goes, steering and such.

bruin_d · 05-11-2011, 12:17 PM

Quote:

Originally Posted by Wildstreak

looking great so far, what type of headers are you running with the bbc and the droppmember?

I bought some Hedman headers for a Chevelle. I don't remember the part number, I'll have to give you that when I get home. It seemed like everything I read from others basically said to get Chevelle headers. Obviously not full length ones. I'll post pictures when I get to that point.

bruin_d · 05-11-2011, 01:50 PM

Quote:

Originally Posted by BlackTopMotors

Subscribed, man that's nice! I need to take a closer look at how that front cross member goes, steering and such.

Its really not bad at all. Basically if you can take the old cross member off, you won't have any problems with putting the new stuff on. The only thing that is remotely difficult is the notch in the frame for the steering but thats not even that bad. Plus he includes very good instructions that even have pretty pictures for those of us who don't know how to read

BlackTopMotors · 05-11-2011, 07:37 PM

Thanks, I appreciate you getting back. I will be looking into that in the near future. I understand about pics (I aint got much a compehenshun whin it comes to werds nither

)

**67cheby** · 05-14-2011, 04:31 PM

looking great man...

05-06-2011, 07:35 PM	#51
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: 72 Suburban Build Looking great! That's a proud dog standing guard.... You've been keeping me motivated with this build, and I'm stoked because I got home from work and my air ride parts were waiting for me! __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

05-06-2011, 08:32 PM	#52
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: 72 Suburban Build In the first pic of the second series of pics you posted yesterday (the one w/the rag on the pass fender), it looks like the burb is dropped? But it looks like that was a pic taken before you put the drop member on the front? __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

05-06-2011, 09:52 PM	#56
babylonflyer Registered User Join Date: Oct 2010 Location: CALI Posts: 107	Re: 72 Suburban Build damn bruin !!! put a leash on that dog!! Kickass stuff here

05-07-2011, 07:27 PM	#58
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build LOTS of progress today!!! Notch is all bolted in, frame is cut. Tomorrow I'm going to attack the trailing arm cross member and trailing arms. I want it back on the ground by the end of the weekend. Attached Images

05-07-2011, 07:33 PM	#59
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: 72 Suburban Build Wow man, you work fast! How are you going to deal with the real wheel tubs and such? __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

05-08-2011, 08:19 PM	#61
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build Almost!!! I still need to hack off the trailer hitch on the back and re-make it and pull the stock tranny cross member out before it's ON THE GROUND. Still need a couple parts to completely finish it because my fastener box was missing them but I'm sure Nate will send them out on Monday. Attached Images

05-08-2011, 09:05 PM	#62
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: 72 Suburban Build That is great work in a short period of time! It looks awesome! __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

05-08-2011, 10:34 PM	#63
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 72 Suburban Build Well you just made me look like a slacker. 6 months deep.... And still a week away. Looks killer bro Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-09-2011, 10:17 AM	#64
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: 72 Suburban Build AWESOME __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

05-09-2011, 10:56 AM	#65
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 72 Suburban Build Nice and low Chief.....who needs a stinking garage to to their suspension work __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

05-11-2011, 07:17 AM	#67
bruin_d Registered User Join Date: Mar 2011 Location: Chesapeake, VA Posts: 578	Re: 72 Suburban Build Removed the POS hitch that was on it, installed the panhard bar, and trimmed the front fenders. I still need to do a little more trimming in the back and on the hood. I'm proabably going to take a day or two off. I'm getting a little burned out. The goal is to have the rear bags on, hood hinges done, front shock mounts on, and all shocks on by the end of the weekend. Attached Images

05-11-2011, 10:40 AM	#68
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 72 Suburban Build Saweet!!!....how's the engine coming? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

05-11-2011, 11:29 AM	#70
Wildstreak "something witty here" Join Date: Apr 2009 Location: Salmo, B.C, Canada Posts: 966	Re: 72 Suburban Build looking great so far, what type of headers are you running with the bbc and the droppmember? __________________ 57 chevy 4x4 70 swb fleetside 4x4 68 burb 2wd: 71 burb 2wd: 350 4spd 71 lwb fleetside 4x4: 350/sm465/205/3.07 eaton posi rear 72 lwb fleetside Cheyenne 454/th400 1991 GMC V3500 CC 4x4

05-11-2011, 11:40 AM	#71
BlackTopMotors Registered User Join Date: Jul 2010 Location: Valencia, CA Posts: 364	Re: 72 Suburban Build Subscribed, man that's nice! I need to take a closer look at how that front cross member goes, steering and such.

05-11-2011, 07:37 PM	#74
BlackTopMotors Registered User Join Date: Jul 2010 Location: Valencia, CA Posts: 364	Re: 72 Suburban Build Thanks, I appreciate you getting back. I will be looking into that in the near future. I understand about pics (I aint got much a compehenshun whin it comes to werds nither)



Register or Log In To remove these advertisements.

05-14-2011, 04:31 PM	#75
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 72 Suburban Build looking great man... __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.