KS saved it from scrap 69 gmc, some decent parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

white 67 · 02-04-2011, 01:26 AM

Quote:

Originally Posted by teeitup

The switch is in it but no key. $15 plus shipping. I've got the centers from 68-70 and 71-72 some with AC some without. Thanks Randy

Im looking for a dash center section for a 67, are they not the same as the other years?

Fesser · 02-04-2011, 11:25 AM

Quote:

Originally Posted by white 67

Im looking for a dash center section for a 67, are they not the same as the other years?

Same question here. I wasn't aware of differences...

bsteenburg · 02-03-2011, 11:35 PM

Will be looking later for a dark green padded dash pad and dark green steering wheel. Let me know on those to if you would please.

Bryce

teeitup · 02-03-2011, 11:36 PM

None of those any good Bryce, sorry. Thanks Randy

jgh64pkup · 02-04-2011, 12:08 AM

Do you still have the radiator holddowns, if so how much shipped to 76448
Posted via Mobile Device

j.kirn · 02-04-2011, 12:24 AM

What shape is the fan shroud in and how much shipped to 63301

jgh64pkup · 02-04-2011, 12:36 PM

I think it's the ignition switch hole that's different
Posted via Mobile Device

Mt Man Chad · 02-04-2011, 12:56 PM

Randy,
Payment sent for the four core radiator brackets.

Fesser - I have a 67 dash center section if Randy cannot find you one.
Includes ashtray & ignition switch (no key) but new barrels w/keys are sold aftermarket.
Ignition switches are smaller and ashtray are different from 68 on up.

Thanks!

teeitup · 02-04-2011, 07:50 PM

Just got home sorry for delay

jgh64, sorry these have been sold I think I have a upper set but no lowers

j.kim, sorry its broke badly

White 67, sorry none right now. 67 is a one year only, ign hole is smaller and ash tray is different. 68-70 has same ignition hole as 71-72's but ash tray was diiferent than 67's and 71-72's

CEEING_RED, I'll have pics here in a bit. All bolts included

Chad, I'll get 4 core holders sent out asap

Here is what is different on center sections
67 smaller ignition hole and ash tray and slide
68-70 ignition hole is bigger and ash tray and slide are different
71-72 same size ignition hole as 68-70 but ash tray and slide are different

Thanks Randy

jgh64pkup · 02-05-2011, 02:19 AM

Quote:

Originally Posted by teeitup

jgh64, sorry these have been sold I think I have a upper set but no lowers

Thanks Randy

All I need is the uppers with the two holes and the fan shroud holes
Posted via Mobile Device

teeitup · 02-05-2011, 09:47 AM

I'm pretty sure I have a set of uppers I'll look this morning. Thanks Randy

**oldgold70c10** · 02-04-2011, 09:53 PM

How much for the carb, throttle rod & gas pedal lever & bracket to 73061?
Wes

teeitup · 02-04-2011, 10:21 PM

Wes, I think the motor is a 4.3 V6, are you sure your wanting this stuff, just making sure? Gas pedal is not original but the rod and stuff are for a 69. Thanks Randy

Big Port Jimmy 6 · 02-04-2011, 10:27 PM

Randy, Could you do me a favor? I need to know the inside height of the frame where the trailing arm crossmember is riveted in. thanks Jay

**oldgold70c10** · 02-04-2011, 10:30 PM

Your right, I took a second look & it is one of those 1/2 of a Q-jet carbs.

OK, just the gas pedal setup and rod, don't need the pedal itself, to 73061

jgh64pkup · 02-05-2011, 10:42 AM

Ok thanks
Posted via Mobile Device

bsteenburg · 02-05-2011, 10:51 AM

Teeitup, did you get the payment to you?

Bryce

teeitup · 02-05-2011, 11:26 AM

Hi Bryce, it showed up this morning in pay pal, I'll get them shipped out Mon. Thanks Randy

Jessechop · 02-05-2011, 10:56 PM

Did you ever get a quote for the rearend? And are the seat belts still available?

teeitup · 02-06-2011, 01:41 AM

Shane, I'll get a pic of what I have on Sun

Jessechop, sorry I ended up selling it locally. Seat bels were junk, what color are you needing I have some others, black, blue and I think some green

Thanks Randy

Jessechop · 02-06-2011, 02:33 PM

Black. Too bad about the rear, I did end up getting one but paid through the nose for it

J. Billman · 02-07-2011, 08:23 PM

In post number 14 you show the center of a dash. Do you still have it. If so how much to denver?

teeitup · 02-08-2011, 05:02 PM

pics for Shane

teeitup · 02-08-2011, 05:03 PM

last

gsd66nova · 02-08-2011, 08:49 PM

Hey Randy, Thanks for the pics but I found a set over the weekend a buddy of mine had and he's gonna give them to me. Hope I didn't waste to much of your time.

Oh I also got the rear glass today.

Thanks man, Shane.

02-03-2011, 11:35 PM	#3
bsteenburg Registered User Join Date: Jan 2011 Location: Illinois Posts: 34	Re: saved it from scrap 69 gmc, some decent parts Will be looking later for a dark green padded dash pad and dark green steering wheel. Let me know on those to if you would please. Bryce

02-03-2011, 11:36 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts None of those any good Bryce, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-04-2011, 12:08 AM	#5
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: saved it from scrap 69 gmc, some decent parts Do you still have the radiator holddowns, if so how much shipped to 76448 Posted via Mobile Device __________________ Gage 1967 C10 Shortbed Stepside

02-04-2011, 12:24 AM	#6
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: saved it from scrap 69 gmc, some decent parts What shape is the fan shroud in and how much shipped to 63301

02-04-2011, 12:36 PM	#7
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: saved it from scrap 69 gmc, some decent parts I think it's the ignition switch hole that's different Posted via Mobile Device __________________ Gage 1967 C10 Shortbed Stepside

02-04-2011, 12:56 PM	#8
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: saved it from scrap 69 gmc, some decent parts Randy, Payment sent for the four core radiator brackets. Fesser - I have a 67 dash center section if Randy cannot find you one. Includes ashtray & ignition switch (no key) but new barrels w/keys are sold aftermarket. Ignition switches are smaller and ashtray are different from 68 on up. Thanks! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 02-04-2011 at 01:07 PM.

02-04-2011, 07:50 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts Just got home sorry for delay jgh64, sorry these have been sold I think I have a upper set but no lowers j.kim, sorry its broke badly White 67, sorry none right now. 67 is a one year only, ign hole is smaller and ash tray is different. 68-70 has same ignition hole as 71-72's but ash tray was diiferent than 67's and 71-72's CEEING_RED, I'll have pics here in a bit. All bolts included Chad, I'll get 4 core holders sent out asap Here is what is different on center sections 67 smaller ignition hole and ash tray and slide 68-70 ignition hole is bigger and ash tray and slide are different 71-72 same size ignition hole as 68-70 but ash tray and slide are different Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-05-2011, 09:47 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts I'm pretty sure I have a set of uppers I'll look this morning. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-04-2011, 09:53 PM	#12
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: saved it from scrap 69 gmc, some decent parts How much for the carb, throttle rod & gas pedal lever & bracket to 73061? Wes __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

02-04-2011, 10:21 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts Wes, I think the motor is a 4.3 V6, are you sure your wanting this stuff, just making sure? Gas pedal is not original but the rod and stuff are for a 69. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-04-2011, 10:27 PM	#14
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: saved it from scrap 69 gmc, some decent parts Randy, Could you do me a favor? I need to know the inside height of the frame where the trailing arm crossmember is riveted in. thanks Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

02-04-2011, 10:30 PM	#15
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: saved it from scrap 69 gmc, some decent parts Your right, I took a second look & it is one of those 1/2 of a Q-jet carbs. OK, just the gas pedal setup and rod, don't need the pedal itself, to 73061 __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

02-05-2011, 10:42 AM	#16
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: saved it from scrap 69 gmc, some decent parts Ok thanks Posted via Mobile Device __________________ Gage 1967 C10 Shortbed Stepside

02-05-2011, 10:51 AM	#17
bsteenburg Registered User Join Date: Jan 2011 Location: Illinois Posts: 34	Re: saved it from scrap 69 gmc, some decent parts Teeitup, did you get the payment to you? Bryce

02-05-2011, 11:26 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts Hi Bryce, it showed up this morning in pay pal, I'll get them shipped out Mon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-05-2011, 10:56 PM	#19
Jessechop Registered User Join Date: Sep 2003 Location: maine Posts: 191	Re: saved it from scrap 69 gmc, some decent parts Did you ever get a quote for the rearend? And are the seat belts still available?

02-06-2011, 01:41 AM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts Shane, I'll get a pic of what I have on Sun Jessechop, sorry I ended up selling it locally. Seat bels were junk, what color are you needing I have some others, black, blue and I think some green Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-06-2011, 02:33 PM	#21
Jessechop Registered User Join Date: Sep 2003 Location: maine Posts: 191	Re: saved it from scrap 69 gmc, some decent parts Black. Too bad about the rear, I did end up getting one but paid through the nose for it

02-07-2011, 08:23 PM	#22
J. Billman Registered User Join Date: Jan 2011 Location: Denver, Colorado Posts: 13	Re: saved it from scrap 69 gmc, some decent parts In post number 14 you show the center of a dash. Do you still have it. If so how much to denver?

02-08-2011, 05:02 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts pics for Shane Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2011, 05:03 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts last Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2011, 08:49 PM	#25
gsd66nova Registered User Join Date: Dec 2010 Location: Milton TN. Posts: 108	Re: saved it from scrap 69 gmc, some decent parts Hey Randy, Thanks for the pics but I found a set over the weekend a buddy of mine had and he's gonna give them to me. Hope I didn't waste to much of your time. Oh I also got the rear glass today. Thanks man, Shane.

Register or Log In To remove these advertisements.