LFD's upper door seal idea! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rob32472** · 11-18-2009, 01:02 PM

I only need the outer set as i am using the push on style for the inner. what would the price be for just the outer seal

Rokcrln · 11-18-2009, 01:07 PM

Quote:

Originally Posted by rob32472

I only need the outer set as i am using the push on style for the inner. what would the price be for just the outer seal

Well the kit I am putting together does not have anything to do with the main door seal. The inner and outer I am doing seal to them selves separate of the main door seal.

So I will not sell it separate because you would not be happy with the results.

Kevin
LFD Inc.

**rob32472** · 11-18-2009, 01:23 PM

kevin i am sorry i guess i was thinking something else. i am in for one once you get it worked out

Rokcrln · 11-18-2009, 02:48 PM

Ok I have gotten some cost back for the bulk buying and it will work in the #'s I was thinking. I now need to check on shipping and boxing. I should get a delivery time back today then I will pull the trigger and order. Also I should have a final cost later today or in the morning.

If needed I can get the factory main door seals from the same supplier for about $50 a set just to through that out their.

Remember to PM me if you want a set so I can contact everyone when they are ready to ship.

Kevin
LFD Inc.

Rokcrln · 11-18-2009, 05:28 PM

Ok I just ordered enough for 18 kits for the first go round. Delivery to me will be just over 2 weeks from today. The profiles I ordered are in stock but they add the adhesive as it is ordered so it is very fresh and sticky

Looks like the best all around way to do shipping is to use the flat rate package. I could save a few or spend a few more depending on where it is shipping to. But I figure if it takes me more time to deal with packaging and pricing then I would have to charge more so this should be the best way to go.

What are your thoughts?

And it looks like I can do it pre cut, packaged with simple directions and shipped any where in the USA for $65.00

I will have my wife get the pay pal set up tonight for pre-orders for the first 18 and that will also let me know if I need to order more before this shipment gets here.

Kevin
LFD Inc.

jeffspower · 11-18-2009, 05:38 PM

I think what we have looks fatter. Sorry for the lousy cell pics. The foot strip does seem like it would work well on the rocker panels. It's just the right width to roll over the edge that gets scuffed bad, yet wouldn't hang over so far that you could see it beneath the door when closed.

Rokcrln · 11-18-2009, 08:32 PM

Hey jeff thanks for checking but the top one is too big and the bottom one is to flat

I tell you their are so many different size's, shape's, composite's, density's and what not I have had a heck of a time finding just what would work. But thanks again for trying.

Ok we have 11 confirmed in the my PM box!

Kevin
LFD Inc.

jorgensensc · 11-18-2009, 08:48 PM

How much for a Burb set?
Shawn

Rokcrln · 11-18-2009, 10:48 PM

Quote:

Originally Posted by jorgensensc

How much for a Burb set?
Shawn

I will check the lengths with my burb in the morning but I am thinking about $90 delivered.

Kevin
LFD Inc.

Rokcrln · 11-19-2009, 12:38 AM

PayPal is set up for orders, ship date for the first batch will be 3 weeks from 11-18-09 if ordering now click here! This kit is for 2 truck doors only and is $65 shipped for burbs send me a PM and we will work it out.

I have ordered enough for 18 sets (2 door trucks) but if I get enough orders up front I can add more material to this order.

Kevin
LFD Inc.

extd56 · 11-19-2009, 12:46 AM

Kevin,

How much picked up?

Rokcrln · 11-19-2009, 01:08 AM

Quote:

Originally Posted by extd56

Kevin,

How much picked up?

-$10 (cost of flat rate shipping)

Kevin
LFD Inc.

Mister laugh · 11-19-2009, 01:28 AM

How much more for them shipped to Canada? Specifically Edmonton, Alberta?

Rokcrln · 11-19-2009, 11:26 AM

Quote:

Originally Posted by Mister laugh

How much more for them shipped to Canada? Specifically Edmonton, Alberta?

I will check on shipping and let you know but it should not be much more if any.

Kevin
LFD Inc.

Rokcrln · 11-19-2009, 07:15 PM

I can do canada for the same cost as what the flat rate boxes are costing me. It will be a few dollars more but I will eat that, less paper work

Kevin
LFD Inc.

jrdv · 11-19-2009, 08:03 PM

Thanks Kevin---ordered 4 sets--paypal payment made.

John

Rokcrln · 11-20-2009, 12:19 PM

Ok 13 sets out of the first 18 are sold so I think I will order another batch so their will not be much of a waiting period for the next order. But if you want in the first order group their are currently 5 sets left, tick-tick-tick

Kevin
LFD Inc.

*vegaschevy* · 11-20-2009, 12:56 PM

you said you also have good door seals that you use as well?

My truck blows air like a cheap hair dryer ...... no wait, she blows hard enough that it might be a GREAT blow dryer.

I have rust repair to do but it would be a few months or more till I get to it so I figured I might just replace the seals till I get that done.

Rokcrln · 11-20-2009, 05:28 PM

Quote:

Originally Posted by vegaschevy

you said you also have good door seals that you use as well?

My truck blows air like a cheap hair dryer ...... no wait, she blows hard enough that it might be a GREAT blow dryer.

I have rust repair to do but it would be a few months or more till I get to it so I figured I might just replace the seals till I get that done.

I have good stock style seals in my truck plus my new double upper door seals. I am only selling the upper double set and I would recommend you go through a board vendor for the stock full door seal. The guy I am getting my upper seals from does carry the main door seal but I do not know the quality and price after I get them and send them out is more then our vendors. Now if your rust work does not involve the top half of the door or jamb then my seals would not be affected by your work. Hope that makes sense.

**rob32472** · 11-20-2009, 07:27 PM

payment sent

72blue · 11-20-2009, 11:37 PM

sent payment also.
thanks LFD

Rokcrln · 11-21-2009, 11:59 AM

I just ordered another batch last night so now I have enough coming for another 18 orders.

Kevin
LFD Inc.

Alex Hayley · 11-21-2009, 12:26 PM

How permanent is the adhesive? If I install this stripping and a year from now decide to paint the truck, can I pull it off without damaging the stripping? Obviously I would need to apply new adhesive.

Rokcrln · 11-21-2009, 01:36 PM

Quote:

Originally Posted by Alex Hayley

How permanent is the adhesive? If I install this stripping and a year from now decide to paint the truck, can I pull it off without damaging the stripping? Obviously I would need to apply new adhesive.

I think it would ruin the seal and leave half of it on the truck. But this way you can see if you like how it works before putting it onto new paint!

Kevin
LFD Inc.

jdpavek · 11-27-2009, 11:33 PM

Quote:

Originally Posted by Rokcrln

I will be checking into it. Once I start getting the seals in bulk I can play with other years to see what works but it will take some time. These are the right seals for 67072's but may not be right for other body styles.

Kevin
LFD Inc.

Kevin, I was going to order for my 77 C20, thinking the only issue would be that the strips would probably not be the right length. However, now I am reading again what you wrote and get the idea you think the profiles you are working with now might not be the ones you come up with as best for my 77.
I can wait or I can take a chance with what you have now - what do you think?
Thanks.
--jd

11-18-2009, 01:02 PM	#51
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: LFD's upper door seal idea! I only need the outer set as i am using the push on style for the inner. what would the price be for just the outer seal

11-18-2009, 01:23 PM	#53
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: LFD's upper door seal idea! kevin i am sorry i guess i was thinking something else. i am in for one once you get it worked out

11-18-2009, 02:48 PM	#54
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's upper door seal idea! Ok I have gotten some cost back for the bulk buying and it will work in the #'s I was thinking. I now need to check on shipping and boxing. I should get a delivery time back today then I will pull the trigger and order. Also I should have a final cost later today or in the morning. If needed I can get the factory main door seals from the same supplier for about $50 a set just to through that out their. Remember to PM me if you want a set so I can contact everyone when they are ready to ship. Kevin LFD Inc. Last edited by Rokcrln; 11-18-2009 at 03:09 PM.

11-18-2009, 05:28 PM	#55
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's upper door seal idea! Ok I just ordered enough for 18 kits for the first go round. Delivery to me will be just over 2 weeks from today. The profiles I ordered are in stock but they add the adhesive as it is ordered so it is very fresh and sticky Looks like the best all around way to do shipping is to use the flat rate package. I could save a few or spend a few more depending on where it is shipping to. But I figure if it takes me more time to deal with packaging and pricing then I would have to charge more so this should be the best way to go. What are your thoughts? And it looks like I can do it pre cut, packaged with simple directions and shipped any where in the USA for $65.00 I will have my wife get the pay pal set up tonight for pre-orders for the first 18 and that will also let me know if I need to order more before this shipment gets here. Kevin LFD Inc.

11-18-2009, 05:38 PM	#56
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: LFD's upper door seal idea! I think what we have looks fatter. Sorry for the lousy cell pics. The foot strip does seem like it would work well on the rocker panels. It's just the right width to roll over the edge that gets scuffed bad, yet wouldn't hang over so far that you could see it beneath the door when closed. Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

11-18-2009, 08:32 PM	#57
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's upper door seal idea! Hey jeff thanks for checking but the top one is too big and the bottom one is to flat I tell you their are so many different size's, shape's, composite's, density's and what not I have had a heck of a time finding just what would work. But thanks again for trying. Ok we have 11 confirmed in the my PM box! Kevin LFD Inc.

11-18-2009, 08:48 PM	#58
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: LFD's upper door seal idea! How much for a Burb set? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-19-2009, 12:38 AM	#60
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's upper door seal idea! PayPal is set up for orders, ship date for the first batch will be 3 weeks from 11-18-09 if ordering now click here! This kit is for 2 truck doors only and is $65 shipped for burbs send me a PM and we will work it out. I have ordered enough for 18 sets (2 door trucks) but if I get enough orders up front I can add more material to this order. Kevin LFD Inc. Last edited by Rokcrln; 11-19-2009 at 12:39 AM.

11-19-2009, 12:46 AM	#61
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: LFD's upper door seal idea! Kevin, How much picked up?

11-19-2009, 01:28 AM	#63
Mister laugh Registered User Join Date: Jun 2007 Location: Edmonton, Alberta Posts: 423	Re: LFD's upper door seal idea! How much more for them shipped to Canada? Specifically Edmonton, Alberta?

11-19-2009, 07:15 PM	#65
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's upper door seal idea! I can do canada for the same cost as what the flat rate boxes are costing me. It will be a few dollars more but I will eat that, less paper work Kevin LFD Inc.

11-19-2009, 08:03 PM	#66
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: LFD's upper door seal idea! Thanks Kevin---ordered 4 sets--paypal payment made. John __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704

11-20-2009, 12:19 PM	#67
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's upper door seal idea! Ok 13 sets out of the first 18 are sold so I think I will order another batch so their will not be much of a waiting period for the next order. But if you want in the first order group their are currently 5 sets left, tick-tick-tick Kevin LFD Inc.

11-20-2009, 12:56 PM	#68
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: LFD's upper door seal idea! you said you also have good door seals that you use as well? My truck blows air like a cheap hair dryer ...... no wait, she blows hard enough that it might be a GREAT blow dryer. I have rust repair to do but it would be a few months or more till I get to it so I figured I might just replace the seals till I get that done.

11-20-2009, 07:27 PM	#70
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: LFD's upper door seal idea! payment sent



Register or Log In To remove these advertisements.

11-20-2009, 11:37 PM	#71
72blue Registered User Join Date: Feb 2009 Location: arroyo grande, ca Posts: 206	Re: LFD's upper door seal idea! sent payment also. thanks LFD __________________ James

11-21-2009, 11:59 AM	#72
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's upper door seal idea! I just ordered another batch last night so now I have enough coming for another 18 orders. Kevin LFD Inc.

11-21-2009, 12:26 PM	#73
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Re: LFD's upper door seal idea! How permanent is the adhesive? If I install this stripping and a year from now decide to paint the truck, can I pull it off without damaging the stripping? Obviously I would need to apply new adhesive.

Register or Log In To remove these advertisements.