![]() |
![]() |
#51 |
Registered User
![]() Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
|
Re: 67 C10 "Green Gobblin" straight from the field!
Tangier orange...that's cool, never seen that color before. Wonder if that's a candian thing ? Anyway , the 67 should be a neat truck with that pile of parts there
__________________
United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son ![]() |
![]() |
![]() |
![]() |
#52 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Back to some updates! Today I removed the floor and firewall by drilling out all the perimeter spot welds. I left the cab corners and rockers in place so i can match up the new floor and they will also add to the strength of the stripped cab. My arm is dead after drilling out all the spot welds while trying to retain the exterior metal!
|
![]() |
![]() |
![]() |
#53 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Its a lot easier to dig into and strip the dash with the floor out on a Rotisserie!!!
|
![]() |
![]() |
![]() |
#54 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Once i got the dash stripped i could move on to taking the firewall out. I originally wasn't going to remove the complete firewall but i started thinking about patches and matching it to the floor and i figured it was best just to change out the whole thing. Heres a few pics of drilling it out and removal.
|
![]() |
![]() |
![]() |
#55 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Once the floor and firewall were out i could really see how bad the rust was in the kick panel and lower hinge post area. So they needed to be rebuilt! It was tricky to do with trying to retain the old rocker panel but it needs to be done before the floor goes in. Heres a few pics of that repair and the last pic is the cab prepped with weld-threw primer ready for the firewall! Thats it for today!!!
|
![]() |
![]() |
![]() |
#56 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: 67 C10 "Green Gobblin" straight from the field!
If ya don't mind my say'in... Awesome pictures! I have never seen a cab with the floor removed and the outter rockers intact and not everyday ya see the firewall removed ether. Nice work!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#57 | |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#58 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
I had a long day today! up early and finished late but finally got some big pieces of the puzzle in! Heres the firewall progress.
|
![]() |
![]() |
![]() |
#59 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
More progress! The floor is finally going in and it fit awesome! One test fit then took it out and prepped it for welding. I stood the cab up on end then basically just dropped it in. I clamped the rear of the floor to the cab then flipped the cab upside down and made sure The inner rockers lined up with the old rockers then i clamped those in place and moved on to lining up the firewall. There was some slight tweaking of the firewall for the seams to meet the floor but it wasn't a big deal. Pics are worth a thousand words so i will just keep posting pics!
|
![]() |
![]() |
![]() |
#60 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
More
|
![]() |
![]() |
![]() |
#61 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Nice to have a shiny new floor installed!
![]() |
![]() |
![]() |
![]() |
#62 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
And last bit of work for the day was removing the firewall/fender liner supports and reinstalling to the cab. Hopefully i can get onto the rockers and cab corners sometime this week but if not i will try and get those done and posted next weekend!
|
![]() |
![]() |
![]() |
#63 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: 67 C10 "Green Gobblin" straight from the field!
So a couple questions....
Have you ever done this before cause your making it look easy.. ![]() Are you using a Mig or a spot welder?
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#64 | |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#65 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Back at it! I had a good productive weekend as i got the Rockers and Cab corners done! I also got some dash work in that i will post some pics of later. Most of the pics i took were of the pass side rockers because once i got going i forgot to take pics! These first few pics are removal and prep.
|
![]() |
![]() |
![]() |
#66 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Rust gone! Rocker and cab corner on! I had to spend a little extra time on the gaps since i cut the entire rear pillar out but after fitting the door a dozen times they turned out nice and even!
|
![]() |
![]() |
![]() |
#67 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
More
|
![]() |
![]() |
![]() |
#68 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Some Of the Drivers side.
|
![]() |
![]() |
![]() |
#69 |
Registered User
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
|
Re: 67 C10 "Green Gobblin" straight from the field!
nice work!
__________________
my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682 |
![]() |
![]() |
![]() |
#70 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
Thanks!
Heres some of the dash work! I hated the fact that someone hacked up the dash to put a Big International radio in this thing! So I had to chop it up even more to put the section in from my 72. I know there are some differences between the 67 to 72 but for me it wasn't a big issue. |
![]() |
![]() |
![]() |
#71 |
Registered User
Join Date: Apr 2012
Location: Winnipeg, Mb
Posts: 487
|
Re: 67 C10 "Green Gobblin" straight from the field!
And in with the new!!! Thats the last bit of welding on the cab so now i will either start the body work and blending the paint (patina style) or i might move on the the fender work or shortening the box???
|
![]() |
![]() |
![]() |
#72 |
Senior Member
![]() Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: 67 C10 "Green Gobblin" straight from the field!
Fantastic work! I wish I was confident enough (read qualified enough) to do the metal work you're doing. Looks like it'll be super solid when you finish with this kind of great work.
|
![]() |
![]() |
![]() |
#73 |
Registered User
![]() Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
|
Re: 67 C10 "Green Gobblin" straight from the field!
Nice work!
__________________
United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son ![]() |
![]() |
![]() |
![]() |
#74 |
Registered User
Join Date: Jun 2015
Location: Winnipeg, Mb
Posts: 137
|
Re: 67 C10 "Green Gobblin" straight from the field!
Very nice work
__________________
My 68 Build http://67-72chevytrucks.com/vboard/s...=1#post7272324 Herb! My C30 build http://67-72chevytrucks.com/vboard/s...80#post7304180 |
![]() |
![]() |
![]() |
#75 |
Senior Member
![]() Join Date: Jan 2007
Location: Turlock, CA
Posts: 8,644
|
Re: 67 C10 "Green Gobblin" straight from the field!
wow... nice work so far!
that's a lot of spot welds to remove. are you using a spot weld cutter or just drilling through everything with a normal drill bit? after that many i'm sure you have an opinion on what's the best tool. i'd be curious on any thoughts you have.
__________________
Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD |
![]() |
![]() |
![]() |
Bookmarks |
|
|