![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#51 |
Registered User
Join Date: Feb 2012
Location: waco texas
Posts: 2
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
awesome truck! i hope my truck turns out as half as good as yours
|
![]() |
![]() |
![]() |
#52 |
Registered User
Join Date: Nov 2011
Location: Idaho
Posts: 857
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Nice build and fast pace. I'm also doing an ls conversion on my 69 c/10. Who reflashed your ecm? I'm only about 45 minutes from sac and looking for a reflash and what did it cost if you don't mind me asking? If your looking for a constant hot wire in run/crank, i used the resistance wire terminal that goes to the coil and then down to the start solenoid terminal "r" I went back into the firewall bulk head connector and removed the resistor wire and replaced it with a normal wire so to get 12v just used the same wire terminal and soldered the new wire on it. To remove the brass spade terminal in the connector just gently squeeze the spade slightly and it will push out of the connector. you probably already knew this.
|
![]() |
![]() |
![]() |
#53 | |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#54 |
Registered User
Join Date: Nov 2011
Location: Idaho
Posts: 857
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Thanks for the info on the flash nice build
Posted via Mobile Device |
![]() |
![]() |
![]() |
#55 |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Here some more pics of the interior...
Interior all primed, ready for paint. ![]() Painted the dash from the dash pad foward satin black. It helps break up the color difference of the burgundy and the black dash pad. ![]() Painted the fuel tank black so its not as noticable with the bucket seats and console down. It will have the black carpet kit on it as well, but figured blacking it out will hide anything you do see ![]() I know its against the rules of 67-72, but we cut the original dash to install the double DIN touch screen CD player... ![]() ![]() ![]() All done, primed, ready for paint ![]() Burgundy paint everywhere!! ![]() Here is the dash pad installed. I think the black top of the dash blends really well with the dash pad. It doesnt make the dash pad look so small or out of place because it is a different color. ![]() Hushmat installed on entire floor and firewall, and also under where the headliner attaches to the roof, so should ride nice and quiet, except for the stainless steel headers and 3" race muffler we will have on it. ![]() ![]() Carpet layed in to get some of the wrinkles out from being in the box, and to test fit to see how it looks. Much cleaner!! ![]() We took the advice from ERASER5 and shortened the steering column. We were able to shorten it 2 inches without having to move the neutral safety switch outside of the firewall. Im glad he mentioned that before it was all buttoned up, because the wheel was really close before shortening. We should have installed a tilt wheel, but its too late now. thats my dad test fitting the passenger side. ![]() And here is a pic with the painted glovebox, new carpet, new carpet hold down rail, and black GMC Door sill dress-up plates. ![]() |
![]() |
![]() |
![]() |
#56 |
Senior Member
![]() Join Date: Aug 2010
Location: Asheville, North Carolina
Posts: 1,855
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Lookin great man. You need to slow down, you're going way to fast
![]()
__________________
ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788 |
![]() |
![]() |
![]() |
#57 |
Registered User
![]() Join Date: Aug 2007
Location: Sandy, Oregon
Posts: 1,551
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
![]()
__________________
Scotts72C10 |
![]() |
![]() |
![]() |
#58 |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
hahaha, thanks guys. Believe me, I feel the same way. This has been the fastest, and slowest, and most expensive 2 months Ive had in a long time. But its soo close to being done, cant slow down now. at least get all of our stuff done so the body man can do his magic on it. Plus race season is a few weeks away and I need to get the truck out of the way so we can get some stuff done on the camaro. first play day is march 9th.
|
![]() |
![]() |
![]() |
#59 | |
'69 Chevy SWB
![]() Join Date: Feb 2009
Location: Surprise, Az
Posts: 1,065
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Wow, what a transformation. I'm digging the the mixture of old school with the satin paint and new school with the LS build. Keep it up. I love the inspiration your dealing out here.
__________________
Matt ![]() ![]() ![]() ![]() ![]() '69 Chevy SWB Fleet, Primer Black; Project No Name '06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold '08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!! '99 Dodge Dakota R/T, Intense Blue; DD, Sold Quote:
|
|
![]() |
![]() |
![]() |
#60 |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
I'm glad you guys are liking the build. I am still having issues with the cluster not working the way it should be, and think I will get another cluster and see if that fixes the problem. Also, the dbw is not working either, but I posted a question about it in the ls section, hopefully I can get some help. Its really frustrating being so close but not being able to rev it up or see any of the gauges that the pcm controls
Posted via Mobile Device |
![]() |
![]() |
![]() |
#61 |
Registered User
Join Date: Jun 2006
Location: Indiana
Posts: 4,859
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
I like the 2 tone interior. Most GMCs came with a 2 tone interior. The glove box and colum usually were darker than the dash color. Some had (all tilts) black as the off set color. I find it a little more interesting than all one color.
Oh, thank Putter, not me. I just pointed, he figured it out.
__________________
'70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60 |
![]() |
![]() |
![]() |
#62 |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Well we got a few kinks worked out. We were having issues with the DBW, so I sent my brother to the salvage yard friday while I was at work to get a new DBW pedal, another gauge cluster, and another fuse block for a similar donor truck. We got the truck to rev up, plugged in the other gauge cluster and it worked perfectly, and plugged in the new fuse block and got it all to work the way its supposed to.
We also glued in the rear carpet on the fuel tank, glued down the regular carpet, mounted the double DIN touch screen radio, and LMC molded kick panels. The kick panels leave much to be desired, but you cant expect much with the junk speakers that come in them. The cold air intake will be showing up today, then we need to bleed the brakes, hook up the e-brake, do a final install of the steering wheel/horn, and take this thing for a spin around the block. I will post updated pics soon. |
![]() |
![]() |
![]() |
#63 |
Registered User
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Awesome project you guys have there!! keep it up
__________________
James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 |
![]() |
![]() |
![]() |
#64 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Man, You are kicking tail on this build! Paint and interior Looks great.
|
![]() |
![]() |
![]() |
#65 |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Some new updates with pictures.
Cluster installed and fully functional ![]() View of dash and cluster from passenger side. ![]() New headliner installed ![]() We decided to lower the seat frames about 1 3/4 inches lower to be more comfortable, and have more room when getting in and out with the steering wheel. This is the new height of the seats. I like it more because theres more room and you can hardly see the seats thru the rear window. ![]() My brother built this shroud cover out of aluminum , masked off a GMC logo with a vinyl sticker he made, the removed the sticker and added a red outline sticker. The GMC lettering is natural mill finish. ![]() ![]() ![]() ![]() ![]() Here is a short youtube clip of the first time we drove it out under its own power. I wish I had more, but it was getting dark, and we didnt want to piss the neighbors off too much with the open headers. http://youtu.be/g_bet3bzq-I Im glad we have it close to being ready for paint, and was not expecting it to have so much power. When we pulled it out on the street, it spun the tires thru the first 2 gears with ease. I will definately be posting another video soon. |
![]() |
![]() |
![]() |
#66 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
nice work , looks good and sounds good, congrats on the drive !
|
![]() |
![]() |
![]() |
#67 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
That shroud turned out great! Congrats on the first drive!
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#68 |
Registered User
Join Date: Sep 2008
Location: Portland, Oregon
Posts: 286
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
The shroud logo is a nice touch. Congrats on the first drive.
__________________
69 C10 "Torchered" RC Crawler Nut http://www.dorkstarproductions.com/orcrc.com/forum/ |
![]() |
![]() |
![]() |
#69 |
Registered User
Join Date: Feb 2012
Location: Sacramento California
Posts: 7
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Damn dude, it sure looks like your little brother knows what he's doing...... Hahahaha
I'm just happy I'm all done prepping and painting. Wait, I am done painting right?? lol |
![]() |
![]() |
![]() |
#70 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Nice work on this project. Congrats.
|
![]() |
![]() |
![]() |
#71 |
Registered User
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Very nice looking truck you guys are turning out there!!! hope to see more of it soon!
__________________
James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 |
![]() |
![]() |
![]() |
#72 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Your truck's interior turned out awesome! Love that cluster and radio! The engine sounds great too! How'd it feel to drive it again?
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#73 | |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Quote:
I just talked to them at the shop and they installed the exhaust today, says it sounds badass. We did 2.5 dual into a 3 inch Y, then into a straight 3 inch round muffler that we normally run on our race cars. I will post a video of it later to show the new tone of the exhaust. the radio is bluetooth ready also and came with a microphone for calls, and they called me on it to test it, sounded great, and didnt sound like it was on speaker phone, so thats pretty cool. I guess we never grow up, just play with more expensive toys! |
|
![]() |
![]() |
![]() |
#74 |
Cadillac power
Join Date: Oct 2002
Location: North Idaho
Posts: 296
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
Did you make them pretty ground and battery cables or buy them somewhere? Tell me more about them, please.
__________________
Just for the record, if I'm down to my last potato, I'm not sharing it with a guy who wants to kill me so he can get a better supply of virgins in paradise. That lesson is a little thing I call Economics 101, infidel style. --Scott Adams author of Dilbert |
![]() |
![]() |
![]() |
#75 |
Registered User
Join Date: Nov 2010
Location: Sacramento CA
Posts: 112
|
Re: Project racing $$$. 1968 GMC SWB 5.3/4l60E Build
The power and ground cables are from an amp kit I had from the truck in my avatar. The guy that bought it didnt want them so I got them back. It is 0 gauge power wire. I had about 10-15ft of it, so we counted how many terminals we needed, and got the crimp teminals at the hardware store. We have a set of big terminal crimpers, but they could have been done with the solder slugs. Strip the wire back, insert the terminal, then get some heat shrink to cover where the wire and terninal meet and there you go! The heat shrink makes it look a lot cleaner. I think the red heat shrink we used was from a set of race plug wire kit we had that we never used.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|