KS 71 1/2 2wd chevy getting the knife next - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 08-30-2011, 10:30 PM

these were all bad. I know I have a pretty good control out there but not sure if I have the cables. I'll get pic of control Wed
Thanks Randy

chopnchaneled · 08-31-2011, 08:12 AM

10-4
Thanks

'Mater · 08-31-2011, 02:19 PM

How much for the brake booster bracket and pushrod shipped to 52402?

teeitup · 08-31-2011, 03:38 PM

$60 shipped for booster, and all brackets and rod to brake pedal. Thanks Randy

nyncompute · 08-31-2011, 04:51 PM

Randy,
I'm looking for a nice straight tie rod for a dana 44 (52") for my 72. Maybe on that k20 you've got coming in. Any love?

teeitup · 08-31-2011, 10:50 PM

Mater, booster is yours, will ship next week

Chopnchanneled, here is the best one I have $36 shipped

Nyncompute, sorry none right now, and I'm not sure if I'll be parting the K20 yet

Thanks Randy

teeitup · 08-31-2011, 10:51 PM

Timb01, here is the gas pedal setup

Vintage Windmills · 08-31-2011, 11:04 PM

Randy, nice visiting you on mon. Did the paypal make it through for the bumper?

teeitup · 08-31-2011, 11:10 PM

Hey Jud, it was great to see you again. Yes got the pay pal, THANKS. Also got that 1 ton parted the rest of the way, no other rust in it. Thanks again, Randy

jrmdigger72 · 09-01-2011, 08:49 AM

Randy, Looking for the block on the firewall that the taillamp harness plugs in to. I have nothing there to plug in to, no really exactly sure what I'm all missing. Any help would be appriciated.

teeitup · 09-01-2011, 12:46 PM

Jim, no plug there, the taillight wiring harness plugs into the wiring harness from fuse box. Unless your talking about the clutch rod hole?

chopnchaneled · 09-02-2011, 07:39 AM

Randy,I'll take the heater controll for 36.00 shipped.
Please pm me your mailing address.
TKS
Joe

teeitup · 09-02-2011, 04:25 PM

pm sent Joe, Thanks Randy

teeitup · 09-18-2011, 01:40 PM

coop here is the bed

johnechi · 09-19-2011, 03:21 AM

How much for the front turn signal assemblies to 92345 please?

71 super · 09-19-2011, 08:45 PM

Randy, do you have a set of bumper lights (brackets and all screws- dont need lenses) for 71-72 front bumper. Let me know, thanks Harold

teeitup · 09-19-2011, 09:25 PM

John, I have this set for $36 shipped
Harold, if he doesn't take these they will be available, I may have another set out there too.
Thanks Randy

teeitup · 09-19-2011, 09:26 PM

pic

71 super · 09-19-2011, 10:00 PM

Just let me know, I went through my stuff and need a few pieces to complete the red/white truck. If you have the fuel line that runs from inside the cab down to frame and the line that runs from the cab corner to the vaper line at frame along with the two rubber grommets I will take those as well. Thank you for your time. Harold

teeitup · 09-20-2011, 11:01 PM

I also have these

Harold, I just hauled in a 72, it may have the fuel lines your needing

johnechi · 09-21-2011, 10:45 AM

Hi Randy, you have a pm.

teeitup · 09-21-2011, 12:53 PM

1st set sold to John, Harold you can get the 2nd set if you want them, Thanks Randy

Camaro_nut2001 · 09-21-2011, 11:35 PM

Do you still have the tailgate?

slick copper · 10-03-2011, 04:30 AM

Hey buddy! Jud told me to ask you if you gotta good rear tail light harness for our trucks. Mine is a 67 LWB if that makes a difference. PO hacked mine up adding in trailer hookups. You got one in good unspliced shape? Post me a pic if so! Thanks,

teeitup · 10-03-2011, 07:30 AM

Camaro, its sold sorry

Slick Copper, I think I have one for a 67 out there, I will look.

Thanks Randy

08-30-2011, 10:30 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next these were all bad. I know I have a pretty good control out there but not sure if I have the cables. I'll get pic of control Wed Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-31-2011, 08:12 AM	#52
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: 71 1/2 2wd chevy getting the knife next 10-4 Thanks

08-31-2011, 02:19 PM	#53
'Mater Registered User Join Date: Jun 2010 Location: Cedar Rapids, IA Posts: 20	Re: 71 1/2 2wd chevy getting the knife next How much for the brake booster bracket and pushrod shipped to 52402?

08-31-2011, 03:38 PM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next $60 shipped for booster, and all brackets and rod to brake pedal. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-31-2011, 04:51 PM	#55
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: 71 1/2 2wd chevy getting the knife next Randy, I'm looking for a nice straight tie rod for a dana 44 (52") for my 72. Maybe on that k20 you've got coming in. Any love? __________________ 1972 K-10 SWB Cheyenne

08-31-2011, 10:50 PM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next Mater, booster is yours, will ship next week Chopnchanneled, here is the best one I have $36 shipped Nyncompute, sorry none right now, and I'm not sure if I'll be parting the K20 yet Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-31-2011, 10:51 PM	#57
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next Timb01, here is the gas pedal setup Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-31-2011, 11:04 PM	#58
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 71 1/2 2wd chevy getting the knife next Randy, nice visiting you on mon. Did the paypal make it through for the bumper? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-31-2011, 11:10 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next Hey Jud, it was great to see you again. Yes got the pay pal, THANKS. Also got that 1 ton parted the rest of the way, no other rust in it. Thanks again, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-01-2011, 08:49 AM	#60
jrmdigger72 Registered User Join Date: Mar 2008 Location: Young America, MN Posts: 44	Re: 71 1/2 2wd chevy getting the knife next Randy, Looking for the block on the firewall that the taillamp harness plugs in to. I have nothing there to plug in to, no really exactly sure what I'm all missing. Any help would be appriciated.

09-01-2011, 12:46 PM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next Jim, no plug there, the taillight wiring harness plugs into the wiring harness from fuse box. Unless your talking about the clutch rod hole? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-02-2011, 07:39 AM	#62
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: 71 1/2 2wd chevy getting the knife next Randy,I'll take the heater controll for 36.00 shipped. Please pm me your mailing address. TKS Joe

09-02-2011, 04:25 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next pm sent Joe, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-18-2011, 01:40 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next coop here is the bed __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-19-2011, 03:21 AM	#65
johnechi Registered User Join Date: Jun 2009 Location: Hesperia, CA Posts: 159	Re: 71 1/2 2wd chevy getting the knife next How much for the front turn signal assemblies to 92345 please?



Register or Log In To remove these advertisements.

09-19-2011, 08:45 PM	#66
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: 71 1/2 2wd chevy getting the knife next Randy, do you have a set of bumper lights (brackets and all screws- dont need lenses) for 71-72 front bumper. Let me know, thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

09-19-2011, 09:25 PM	#67
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next John, I have this set for $36 shipped Harold, if he doesn't take these they will be available, I may have another set out there too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-19-2011, 09:26 PM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next pic Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-19-2011, 10:00 PM	#69
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: 71 1/2 2wd chevy getting the knife next Just let me know, I went through my stuff and need a few pieces to complete the red/white truck. If you have the fuel line that runs from inside the cab down to frame and the line that runs from the cab corner to the vaper line at frame along with the two rubber grommets I will take those as well. Thank you for your time. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

09-20-2011, 11:01 PM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next I also have these Harold, I just hauled in a 72, it may have the fuel lines your needing Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 10:45 AM	#71
johnechi Registered User Join Date: Jun 2009 Location: Hesperia, CA Posts: 159	Re: 71 1/2 2wd chevy getting the knife next Hi Randy, you have a pm.

09-21-2011, 12:53 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next 1st set sold to John, Harold you can get the 2nd set if you want them, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 11:35 PM	#73
Camaro_nut2001 Chevy Lover Till The End. Join Date: Dec 2009 Location: Mascot TN. Posts: 795	Re: 71 1/2 2wd chevy getting the knife next Do you still have the tailgate? __________________ 1969 Chevy SWB Big Block - Under the knife as of 12/26/2011 1989 Chevy Silverado, 4X4 - Daily Driver 1996 Chevy Suburban K1500 - 4-Wheeler, Campin Truck 1968 Chevrolet Impala Sport Coupe - 327/350hp, TH400, all original. Members I've met: BamaBaxter, My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=500359

10-03-2011, 04:30 AM	#74
slick copper Registered User Join Date: Aug 2010 Location: Richmond, KY Posts: 1,137	Re: 71 1/2 2wd chevy getting the knife next Hey buddy! Jud told me to ask you if you gotta good rear tail light harness for our trucks. Mine is a 67 LWB if that makes a difference. PO hacked mine up adding in trailer hookups. You got one in good unspliced shape? Post me a pic if so! Thanks, __________________ Raymond 1967 Chevy C/10 LWB Custom Optioned "big window truck" AKA Copper. My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=452594 The story of how I got the truck:http://67-72chevytrucks.com/vboard/s...d.php?t=450939 Ole Smokey Build Thread 2002 Silverado 8.1L Crew Cab SOLDhttp://67-72chevytrucks.com/vboard/s...d.php?t=618402

10-03-2011, 07:30 AM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd chevy getting the knife next Camaro, its sold sorry Slick Copper, I think I have one for a 67 out there, I will look. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.