The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Alternate Tinkerings

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-27-2009, 08:17 PM   #51
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: 1969 Camaro "Yenko" Clone

I'm going to be following this thread a lot more closely now. I had a serious talk with my pops and he's handing over the keys to his 67 Firebird. It's originally an SC car, but went to NY in the mid 80's. My pops did a nice "home" restoration in the late 80's. The motor blew in the early 90's and life and kids got in the way for my dad to ever finish her again. He has a couple other irons in the fire, including the nice South Carolina '58 Apache shortbed I gave him last year (my very first truck that I started to restore but never actually drove it.)

Sorry to mess up your thread a bit, but I had to share my excitement with my fellow truck nuts. The car isn't great, but it's not a rusty POS either. The front clip was removed in the mid 90's and has been in dry storage ever since. It's gonna need the usual, some floor sections, rockers, lower quarters, etc... but I'm really excited, it's all there except for the drivetrain. I'll have a lot more rust to fix than you, but this car has never had a welder taken to it, so I won't have to deal with some of the mess you had to. This is THE car that got me into "cars." I was around 8 or 9 when my dad was working on it and I have a lot of memories helping dad put it back together and going for rides in it.

The car is in NY, so I hope to get it to SC next summer. These are the only current pics I have, my sister took them, so they kinda suck

Keep up the great work and take lots more pics
Attached Images
   
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!

Last edited by 67ChevyRedneck; 10-27-2009 at 10:10 PM.
67ChevyRedneck is offline   Reply With Quote
Old 10-28-2009, 12:52 AM   #52
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

That is awesome, and no you are not messing up this thread, it is herer for that, all of our enjoyment. Awfully nice of your pops to give the car to you. Hope you get it home!!!!






Quote:
Originally Posted by 67ChevyRedneck View Post
I'm going to be following this thread a lot more closely now. I had a serious talk with my pops and he's handing over the keys to his 67 Firebird. It's originally an SC car, but went to NY in the mid 80's. My pops did a nice "home" restoration in the late 80's. The motor blew in the early 90's and life and kids got in the way for my dad to ever finish her again. He has a couple other irons in the fire, including the nice South Carolina '58 Apache shortbed I gave him last year (my very first truck that I started to restore but never actually drove it.)

Sorry to mess up your thread a bit, but I had to share my excitement with my fellow truck nuts. The car isn't great, but it's not a rusty POS either. The front clip was removed in the mid 90's and has been in dry storage ever since. It's gonna need the usual, some floor sections, rockers, lower quarters, etc... but I'm really excited, it's all there except for the drivetrain. I'll have a lot more rust to fix than you, but this car has never had a welder taken to it, so I won't have to deal with some of the mess you had to. This is THE car that got me into "cars." I was around 8 or 9 when my dad was working on it and I have a lot of memories helping dad put it back together and going for rides in it.

The car is in NY, so I hope to get it to SC next summer. These are the only current pics I have, my sister took them, so they kinda suck

Keep up the great work and take lots more pics
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 10-28-2009, 07:24 AM   #53
my67chevytruck
Under Construction
 
my67chevytruck's Avatar
 
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
Re: 1969 Camaro "Yenko" Clone

looking good bro!
__________________
Heath

subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php

http://67-72chevytrucks.com/vboard/s...d.php?t=157669
FAQ how to's


1956 Chevy Apache
1967 C10 SWB FleetSide (under construction)
1969 K10 SWB FleetSide (Future Build)
1972 C10 SWB Stepside (Future Build)


56 chevy truck :
http://www.cardomain.com/ride/2955823/1

67 truck build:

http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1


69 k10:
http://67-72chevytrucks.com/vboard/s...d.php?t=389470
my67chevytruck is offline   Reply With Quote
Old 10-28-2009, 12:43 PM   #54
UltraBlue71
Registered User
 
UltraBlue71's Avatar
 
Join Date: Feb 2009
Location: OKC OK
Posts: 489
Re: 1969 Camaro "Yenko" Clone

Sweet Job Nuke! My all time favorite muscle car with my all time favorite big block, Nice to see there are some true craftsmen left out there
(even if they are CANUCKS) HA
For real I cant wait to see yor finished product, Hoss!
__________________
"You can put lipstick on a pig, sure it's pretty pig, but it's still just a PIG...

71 LWB
UltraBlue71 is offline   Reply With Quote
Old 10-28-2009, 02:45 PM   #55
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by my67chevytruck View Post
looking good bro!
Thanks

Quote:
Originally Posted by UltraBlue71 View Post
Sweet Job Nuke! My all time favorite muscle car with my all time favorite big block, Nice to see there are some true craftsmen left out there
(even if they are CANUCKS) HA
For real I cant wait to see yor finished product, Hoss!
LOL, thanks alot, i appreciate taht even if i am a CANUCK that lives in an Igloo, EH! LMAO. Anyhow thanks alot and there will be more progress when i get back from Vegas. Later guys.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 11-15-2009, 07:00 PM   #56
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: 1969 Camaro "Yenko" Clone

Did you lose all of your money in Vegas?

Time for some updates!
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 11-19-2009, 10:12 PM   #57
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by 67ChevyRedneck View Post
Did you lose all of your money in Vegas?

Time for some updates!
LOL, you are right, at the end of the weekend there will be some more, not large progress but some.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 11-20-2009, 02:50 PM   #58
Normy71
Registered User
 
Join Date: Apr 2009
Location: Saskatchewan, Canada
Posts: 236
Re: 1969 Camaro "Yenko" Clone

Very Nice!!
Noticed allot of your parts are from CPP how do you go about getting them up to Canada? I tried to order some stuff from them but the shipping is killer to the North.
Thanks
__________________
Rolled the dice and lost!!

Check Out my 71 build
http://67-72chevytrucks.com/vboard/s...d.php?t=375158
Normy71 is offline   Reply With Quote
Old 12-21-2009, 08:51 AM   #59
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Explanation Later
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 12-21-2009, 08:53 AM   #60
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

more yet
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 12-21-2009, 08:55 AM   #61
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

yet more
Attached Images
    
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 12-21-2009, 09:57 AM   #62
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: 1969 Camaro "Yenko" Clone

See there I knew you weren't laying around home eating bon bons. J/K...The Camaro is coming along great! Just out of curiosity, how much would it cost me to buy all new floor pans, fenders, quarter panels for a 67 or 68? I am hoping to start on one of ours later this year and need to know how much to save for sheetmetal. You did say you were working on 3 of them right? They pretty much all need the same rust repair usually right?
mcbassin is offline   Reply With Quote
Old 12-21-2009, 10:03 PM   #63
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by mcbassin View Post
See there I knew you weren't laying around home eating bon bons. J/K...The Camaro is coming along great! Just out of curiosity, how much would it cost me to buy all new floor pans, fenders, quarter panels for a 67 or 68? I am hoping to start on one of ours later this year and need to know how much to save for sheetmetal. You did say you were working on 3 of them right? They pretty much all need the same rust repair usually right?
You are right, no Bon Bons for this guy, just toffifee. It is coming along, but not as fast as i want, my arm stil hurts at times so i still have to take it easy on myself, swork is intermitent. As for your parts i up here i usually say around 3500 will buy you all the sheetmetal you need. Trust me, there is always unexpected stuff. and if you do buy sheetmetal, but the good stuff and spend the extra amount on it. You may not think that it is worth it at first, but it really is worth it in the end. And yes to be exact 4 of them. But this one gets done first!!!!!! Yup they are all about the same, trunk and floorpans, dropoffs, wheel tubs, quarters, tailpan, firewall, rockers, air vent boxes, and a couple more little things.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 12-21-2009, 10:06 PM   #64
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Ok, time for some explanation, i got rid of the rear side marker lights to start with, then i put in the Detroit Speed and Engineering weld in subframe connectors. They fit nice and will work great to turn the frame into one. Also i got the firewall cut out where all the rust was and now i am in the process of getting it back together. Kinda stock but not really. pics to follow later.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 12-22-2009, 12:40 AM   #65
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: 1969 Camaro "Yenko" Clone

Thanks for the info about the sheetmetal. I just went over to Classic Industries and looked at their parts....Man, I will have to dig deep to fix these cars.

Now about the marker light filling. It looks really smooth! What did you use to weld the seam? It almost looks like you silver braze? The sub frame looks great too. This will be a super car when you get it done. As usual the fab and welds look good too. Keep me updated on the progress.

forgot to ask, where do you get the copper weld through primer?.. thanks

Last edited by mcbassin; 12-22-2009 at 12:42 AM.
mcbassin is offline   Reply With Quote
Old 12-22-2009, 12:42 AM   #66
jgh64pkup
Sunburst C10!!!
 
jgh64pkup's Avatar
 
Join Date: Jan 2009
Location: Texas
Posts: 2,560
Re: 1969 Camaro "Yenko" Clone

lookin good
what is that copper colored spray you have on there
is it some type of weld through primer?
__________________
Gage
1967 C10 Shortbed Stepside
jgh64pkup is offline   Reply With Quote
Old 12-22-2009, 08:48 AM   #67
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Quote:
Originally Posted by mcbassin View Post
Thanks for the info about the sheetmetal. I just went over to Classic Industries and looked at their parts....Man, I will have to dig deep to fix these cars.

Now about the marker light filling. It looks really smooth! What did you use to weld the seam? It almost looks like you silver braze? The sub frame looks great too. This will be a super car when you get it done. As usual the fab and welds look good too. Keep me updated on the progress.

forgot to ask, where do you get the copper weld through primer?.. thanks
I just used my normal miller welder and ground it down then sanded it, then pick and filed the area for no warpage. And as for the front subframe i welded it al up for strenght. this car is gonna need it. 650 HP!!!!!

Quote:
Originally Posted by jgh64pkup View Post
lookin good
what is that copper colored spray you have on there
is it some type of weld through primer?
As for the copper weld thru primer, it is called U-POL weld #2 weld thru primer. It is by far superior over the zinc weld thru primer, the cost is a little more but it works way better. you should be able to get it at any autobody shop, but i am not sure down there, i know napa carries it, but that not where i get it. It is a european product but by far superior to anything that we have over here. i have used it for around 5 years now with zero trouble.
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 12-22-2009, 09:41 AM   #68
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: 1969 Camaro "Yenko" Clone

Thanks Nuke,
I have looked at all the local paint supply shops here and haven't been able to find anything like it. I will check the net.

Edit, I got it ordered today....wow! $32 a can!shipped

Last edited by mcbassin; 12-23-2009 at 12:18 AM.
mcbassin is offline   Reply With Quote
Old 12-22-2009, 10:36 AM   #69
my67chevytruck
Under Construction
 
my67chevytruck's Avatar
 
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
Re: 1969 Camaro "Yenko" Clone

looking good nuke!
__________________
Heath

subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php

http://67-72chevytrucks.com/vboard/s...d.php?t=157669
FAQ how to's


1956 Chevy Apache
1967 C10 SWB FleetSide (under construction)
1969 K10 SWB FleetSide (Future Build)
1972 C10 SWB Stepside (Future Build)


56 chevy truck :
http://www.cardomain.com/ride/2955823/1

67 truck build:

http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1


69 k10:
http://67-72chevytrucks.com/vboard/s...d.php?t=389470
my67chevytruck is offline   Reply With Quote
Old 12-22-2009, 06:22 PM   #70
sourkraut
Registered User
 
sourkraut's Avatar
 
Join Date: Sep 2008
Location: WI
Posts: 1,243
Re: 1969 Camaro "Yenko" Clone

Looking good Nuke. Damn dude dont tease like that, Tofifee! There is only one store near me that still sells them! Once they stop stocking them I am screwed! That is good stuff! I will have to head for the border and not the taco side of the country to get my fix!
__________________
"The way it is" truck build
http://67-72chevytrucks.com/vboard/s...d.php?t=359200




sourkraut is offline   Reply With Quote
Old 12-26-2009, 07:44 PM   #71
69GMCor70Chevy
Registered User
 
69GMCor70Chevy's Avatar
 
Join Date: Jul 2007
Location: Greenwater Lake, SK
Posts: 175
Re: 1969 Camaro "Yenko" Clone

With the changes are you still on pace for the March car show?

I bought a 68 from Washington State this week. So that will be another coming North!
__________________
68 Camaro - 327 Original Red on Red Car
69 GMC LWB - Built 350 a Blast To Drive
69 GMC LWB - "Green Machine" One Family Truck
70 Mercury Marauder - Future Project
69GMCor70Chevy is offline   Reply With Quote
Old 01-23-2010, 11:15 PM   #72
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Well, I am not sure anymore if it will be done for the car show, but i will try, with my new job i am re-energized to work now that i am no longer working on cars all day, i can go home and my arm does not hurt now. It is great. Well as of now i have gotten more done on the car. I got the firewall All done, cleaned up and recessed for the engine. It will be fairly smooth when done. Once that was done i started on the front left door pillar and vent area.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 01-23-2010, 11:20 PM   #73
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

Once i got the front done and cleaned up,I worked on the rear quarter panel and wheel arch and rear door jamb. Got that all done and cleaned up. Turned out fine. One spot warped on me thou, C$#@$%%^%!!!!!!!
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 01-23-2010, 11:25 PM   #74
nuke1
Registered User
 
nuke1's Avatar
 
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
Re: 1969 Camaro "Yenko" Clone

I got the front pillar done on the other side also, so now i am officially down to roughly 7 little patches left on the shell. Getting there. whew. Also Thank you Tyer ( Tyler 58) for the help today. it was great.
Attached Images
     
__________________
James
1968 GMC "HAVOC"
1986 GMC "Frank"
J.J.R.H. Design & Consulting

My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300
A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238
1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361
Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390
Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100
1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587
nuke1 is offline   Reply With Quote
Old 01-24-2010, 09:49 PM   #75
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: 1969 Camaro "Yenko" Clone

Looking great!
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com