custom backhalf C4 IRS and Front suspension - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cornutz · 07-20-2008, 12:49 AM

Another view of the setup

cornutz · 07-20-2008, 01:16 PM

Quote:

Originally Posted by COMP

looks like its going to be hard on balljoints

This setup wont be any harder than the original setup. This just changes the lift ratio.

cornutz · 07-20-2008, 04:05 PM

Getting there....

cornutz · 07-20-2008, 10:15 PM

As to any issues with balljoints, there shouldnt be any as all this does is give the front end more lift. The angles have remained the same in regards to the ball joints. I still have to box the front frame rails and there will be a cross piece going from shock/bag tower hoop to the oposite side that will be removeable for future needs to pull the big block.

**N2TRUX** · 07-20-2008, 10:56 PM

I was with ya till this last change of direction. Looks like an off road suspension to me.

**FRENCHBLUE72** · 07-20-2008, 11:22 PM

To me it all looks good except the bar that the shockwave attaches too.. I see there is a killer tube front crossmember built and a killer rear frame section but that hoop just looks plain? I dont know how you would really dress it up but compared to the rest of the work is just looks like it was tossed on there? just my opnion though

COMP · 07-20-2008, 11:37 PM

Quote:

Originally Posted by FRENCHBLUE72

To me it all looks good except the bar that the shockwave attaches too.. I see there is a killer tube front crossmember built and a killer rear frame section but that hoop just looks plain? I dont know how you would really dress it up but compared to the rest of the work is just looks like it was tossed on there? just my opnion though

ya it needs bracing

cornutz · 07-21-2008, 10:32 AM

Quote:

Originally Posted by COMP

ya it needs bracing

Its far from finished. There's still way more fab needed to be completed. That's why it looks plain and just thrown on there. This is just R&D. As for the offroad suspension

thats funny. Right now it does but when its finished it will speak for itself. Funny if you look at front strut race chassis their suspension has funny offroad hoops also.

cfmotorsports · 07-21-2008, 04:21 PM

hay dude do you have any more pic of your set up that sick as *uck!! thanx dude you do nice work!!

cornutz · 07-21-2008, 07:11 PM

Quote:

Originally Posted by cfmotorsports

hay dude do you have any more pic of your set up that sick as *uck!! thanx dude you do nice work!!

Which set up? The front or back....Oh, and thanks!!

PipsC10 · 07-21-2008, 07:40 PM

Im confused. Are you and junior the same person, or are you his press guy? If you are the same person, how do you weld straight with eyes like that? I would like to see this thing in person when the frame is finished. Looks bad ass, keep up the good work.

cornutz · 07-21-2008, 08:41 PM

You can check it out just about any day you want to! If you know where the bait barn is in Waterford, the shop is right next to it, and this truck is right in there. Jr is just getting his shop off the ground in that location. Hopefully it will be up and officially running within the week. Jr, is my brother from another mother. My name is Bill...I like to think I push his @$$ in the right direction, but he does all the fabrication and welding and what not. My avatar is a pic of Jr from a LONG time ago...and yes, his eyes do look all tore up. This truck actually belongs to BO*FUS, or Josh...it is a family truck that has obviously undergone some serious changes. This is actually my account...Jr's account was under ValleyCustoms, but he forgot his password and the old email is no longer around.... too many fumes from welding I guess! So he sends me the pics and I post them for him. He signs on and updates posts here.....now you know!

joe231 · 07-21-2008, 08:51 PM

very sweet truck!!!
did Jr have some kind of accident? before the pic?
thanks for asking pipsc10 i had the same questions

PipsC10 · 07-21-2008, 09:22 PM

Quote:

Originally Posted by cornutz

You can check it out just about any day you want to! If you know where the bait barn is in Waterford, the shop is right next to it, and this truck is right in there. Jr is just getting his shop off the ground in that location. Hopefully it will be up and officially running within the week. Jr, is my brother from another mother. My name is Bill...I like to think I push his @$$ in the right direction, but he does all the fabrication and welding and what not. My avatar is a pic of Jr from a LONG time ago...and yes, his eyes do look all tore up. This truck actually belongs to BO*FUS, or Josh...it is a family truck that has obviously undergone some serious changes. This is actually my account...Jr's account was under ValleyCustoms, but he forgot his password and the old email is no longer around.... too many fumes from welding I guess! So he sends me the pics and I post them for him. He signs on and updates posts here.....now you know!

you got to be kidding me, go 1 mile east from the bait barn on Yosemite and thats where my truck is. You guys around on the weekends? My cab and bed are at my folks house in Waterford and my chassis is here in Sonora. I'm right across the street from where Big Bear Park used to be.

You know Waterford is the land of golden riches..... flies, fleas, portagees and oaky sons a *****es. At least that's what my pops tells me.

cfmotorsports · 07-21-2008, 10:49 PM

the front set up thanks dude

cornutz · 07-21-2008, 11:41 PM

Quote:

Originally Posted by PipsC10

you got to be kidding me, go 1 mile east from the bait barn on Yosemite and thats where my truck is. You guys around on the weekends? My cab and bed are at my folks house in Waterford and my chassis is here in Sonora. I'm right across the street from where Big Bear Park used to be.

You know Waterford is the land of golden riches..... flies, fleas, portagees and oaky sons a *****es. At least that's what my pops tells me.

Yeah..good old Waterhole... land of dog ****ers!!! LOL!! There is a shop next to the bait barn and across from the taqueria... That is where Jr does his dirty work... sometimes you can see a 54 chopped top chevy with a red roof sitting next to the chain link fence on the inside. Jr is redoing a 4 link rear end on that one... I dont think he will be there this Saturday as he is busy with baby sitting duties that day! Maybe Sunday, but he will chime in here later for sure with his own schedule and what not.

cornutz · 07-21-2008, 11:43 PM

Quote:

Originally Posted by cfmotorsports

the front set up thanks dude

The front suspension is still a work in progress...and I am posting all the pics that he sends from his phone to my email. So far, what you see is what you get...He still has some bracing/boxing/welding to do, so stay tuned. If you want any up close or different angle pics, just let me know and we can get them on here for you. Or drive an hour and 10 mins and see it for yourself

cornutz · 07-22-2008, 01:41 AM

Quote:

Originally Posted by cornutz

Yeah..good old Waterhole... land of dog ****ers!!! LOL!! There is a shop next to the bait barn and across from the taqueria... That is where Jr does his dirty work... sometimes you can see a 54 chopped top chevy with a red roof sitting next to the chain link fence on the inside. Jr is redoing a 4 link rear end on that one... I dont think he will be there this Saturday as he is busy with baby sitting duties that day! Maybe Sunday, but he will chime in here later for sure with his own schedule and what not.

Hey this is Jr. I forgot my login so im using Bill's. Im at the shop 7 days a week. This sat I wont be there but ill be there on Sun from 9-4.

azfab · 07-22-2008, 10:13 PM

sick set up dude have any pics of the lift and layed with the bondspeeds? thanx

cornutz · 07-22-2008, 11:57 PM

Quote:

Originally Posted by azfab

sick set up dude have any pics of the lift and layed with the bondspeeds? thanx

Not yet...and those are intros...

cornutz · 07-23-2008, 12:11 AM

Josh got stuff back from powder coating...starting to look purty!

Can you say DOMINATOR!!! This thing will not miss a single gas station from town to town!

BO*FUS · 07-23-2008, 08:29 PM

Man this thing looks alittle differant. I found a photo of it back in 2002.

cornutz · 07-23-2008, 09:06 PM

Yeah, its going to look A LOT different than the truck it used to be...

cornutz · 07-25-2008, 11:31 PM

A glimpse of how it will look very soon...

cornutz · 07-28-2008, 06:20 PM

Saying goodbye to pieces of the firewall....we will see how much more it changes as we go...

There is going to be a removeable support from hoop to hoop going over the front of the motor....again, this is just R&D....

07-20-2008, 12:49 AM	#51
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension Another view of the setup

07-20-2008, 04:05 PM	#53
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension Getting there....

07-20-2008, 10:15 PM	#54
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension As to any issues with balljoints, there shouldnt be any as all this does is give the front end more lift. The angles have remained the same in regards to the ball joints. I still have to box the front frame rails and there will be a cross piece going from shock/bag tower hoop to the oposite side that will be removeable for future needs to pull the big block.

07-20-2008, 10:56 PM	#55
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: custom backhalf C4 IRS and Front suspension I was with ya till this last change of direction. Looks like an off road suspension to me. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

07-20-2008, 11:22 PM	#56
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: custom backhalf C4 IRS and Front suspension To me it all looks good except the bar that the shockwave attaches too.. I see there is a killer tube front crossmember built and a killer rear frame section but that hoop just looks plain? I dont know how you would really dress it up but compared to the rest of the work is just looks like it was tossed on there? just my opnion though __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-21-2008, 04:21 PM	#59
cfmotorsports Registered User Join Date: Aug 2007 Location: livermore Posts: 18	Re: custom backhalf C4 IRS and Front suspension hay dude do you have any more pic of your set up that sick as *uck!! thanx dude you do nice work!!

07-21-2008, 07:40 PM	#61
PipsC10 Registered User Join Date: Jan 2008 Location: Oakdale, Ca Posts: 655	Re: custom backhalf C4 IRS and Front suspension Im confused. Are you and junior the same person, or are you his press guy? If you are the same person, how do you weld straight with eyes like that? I would like to see this thing in person when the frame is finished. Looks bad ass, keep up the good work. __________________ 1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4

07-21-2008, 08:41 PM	#62
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension You can check it out just about any day you want to! If you know where the bait barn is in Waterford, the shop is right next to it, and this truck is right in there. Jr is just getting his shop off the ground in that location. Hopefully it will be up and officially running within the week. Jr, is my brother from another mother. My name is Bill...I like to think I push his @$$ in the right direction, but he does all the fabrication and welding and what not. My avatar is a pic of Jr from a LONG time ago...and yes, his eyes do look all tore up. This truck actually belongs to BO*FUS, or Josh...it is a family truck that has obviously undergone some serious changes. This is actually my account...Jr's account was under ValleyCustoms, but he forgot his password and the old email is no longer around.... too many fumes from welding I guess! So he sends me the pics and I post them for him. He signs on and updates posts here.....now you know!

07-21-2008, 08:51 PM	#63
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: custom backhalf C4 IRS and Front suspension very sweet truck!!! did Jr have some kind of accident? before the pic? thanks for asking pipsc10 i had the same questions __________________ *CHEVY ONLY* Last edited by joe231; 07-21-2008 at 08:51 PM.

07-21-2008, 10:49 PM	#65
cfmotorsports Registered User Join Date: Aug 2007 Location: livermore Posts: 18	Re: custom backhalf C4 IRS and Front suspension the front set up thanks dude

07-22-2008, 10:13 PM	#69
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: custom backhalf C4 IRS and Front suspension sick set up dude have any pics of the lift and layed with the bondspeeds? thanx __________________ lifes short fabricate as much as you can!

07-23-2008, 12:11 AM	#71
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension Josh got stuff back from powder coating...starting to look purty! Can you say DOMINATOR!!! This thing will not miss a single gas station from town to town!

07-23-2008, 08:29 PM	#72
BO*FUS Registered User Join Date: May 2008 Location: Hilmar ca Posts: 6	Re: custom backhalf C4 IRS and Front suspension Man this thing looks alittle differant. I found a photo of it back in 2002. Attached Images Last edited by BOFUS; 07-23-2008 at 09:08 PM.*

07-23-2008, 09:06 PM	#73
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension Yeah, its going to look A LOT different than the truck it used to be...

07-25-2008, 11:31 PM	#74
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension A glimpse of how it will look very soon... __________________ Funded by RANDY!!!



Register or Log In To remove these advertisements.

07-28-2008, 06:20 PM	#75
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	Re: custom backhalf C4 IRS and Front suspension Saying goodbye to pieces of the firewall....we will see how much more it changes as we go... There is going to be a removeable support from hoop to hoop going over the front of the motor....again, this is just R&D.... __________________ Funded by RANDY!!!

Register or Log In To remove these advertisements.