64 c10 build

[NevEno]

Drivers side rocker done!!

[NevEno]

I scored a used painted grille today. I'm looking to buy a painted/primed back bumper. Anybody buy bumpers from top banana?? It would be like $169 to my door.

http://www.topbananaparts.com/primed-rear-bumper-2.html

[Dubnova]

Originally Posted by NevEno

I scored a used painted grille today. I'm looking to buy a painted/primed back bumper. Anybody buy bumpers from top banana?? It would be like $169 to my door.

http://www.topbananaparts.com/primed-rear-bumper-2.html

I don't know about top banana but, I like the painted bumpers. I think they look really clean.

[NevEno]

Undercoating done!

[NevEno]

I cut my dash.. Well I'm fixing the PO radio cut out.

Before

[NevEno]

I still have a few spots to touch up.

After

[NevEno]

Thanks Mjminino! I kept my spot welds spaced out and cooled each weld with water, sanded the welds with a angle die grinder with 2" 36 grit pads.

[rickoner]

You're moving right along and doing great work to boot!

Don't know if I missed it, but what product did you use as undercoating?

[NevEno]

I bought these on eBay Friday!! I haven't got'em yet, but they seem to be in really good shape.. I know I'll have to repaint them witch is cool cause
I have to paint my bumpers and grille!!

[Evoracer]

Originally Posted by NevEno

My new primed bumper came in yesterday from TB. It took less than a week. The chrome bumper was ok but I think it will look a lot better with a painted one.

TB?

I've looking for some non-chrome bumpers for my '63.

[Billyburban]

Originally Posted by NevEno

They are original 64-65 painted hubcaps! They were about $45 each shipped!! I bought a set of chrome reproduction caps when I first started my build.. I didn't think I'd be able to find a full set. I did buy 2 other painted caps a few months ago, so now I'll have 6 and should be able to make a nice set.

What size are your huncaps ? 9inch 10inch

[clemdaddy]

very cool Paul... I print this out and tape it to everything that comes through the shop. Always seems the way things go.

[NevEno]

Small update!! Little more rust repair.. I got the hubcaps, 3 of the 4 look good!

[rwade]

Who made the lisence plate sitting on your cowl? Looks like it was cut with a water jet.

Wade

[NevEno]

I had a local company make it on their CNC plasma cutter.

[NevEno]

I’ve decided to paint the truck. I figure I’ve went this far I might as well finish it, I can’t leave well enough alone. Here is some pics of the rust repair.

[NevEno]

I finish fixing rust and I find more.. I had some rot/damage under the gas filler hole and rot under the drip rail on the driver side. I’m replacing the door skins now that the door bottoms are done. We wet blasted and wire wheeled the inside of the doors and primed ... Now I can put Hushmat the inside of the doors before installing the skins.

[NevEno]

More Pictures!! Oh and had to patched the speaker hole in the doors.

[NevEno]

I did order my evap block-off plug from them.. The guy I spoke with was real cool.

https://www.novak-adapt.com/catalog/..._ecm_mount.htm

[rwade]

Who made your instrument cluster? Are you running any wheel adapters on front or rear? Reason I ask is mine will be on bags and I'm wondering how close it'll be to the fenders on front and rear. Looked close in the pic you posted on page 2 (I think it was page 2).

[NevEno]

Rockers DONE! I worked on the bottom of the cab Saturday removing the old paint and undercoating with a wire wheel. I still need to sand it and hit some weld spots and it should be ready for new undercoating.

[Modges'66]

The seat looks super-nice, but no adjustment?
I guess it will be allright if you are the only driver, and it fits you...

[Zele3jiya7]

What kind of rims did you use for the build......nice job

[NevEno]

Originally Posted by 1963c-10

Nice work on the cab repair. And great find on the hubcaps.

Thank you

Originally Posted by Zele3jiya7

What kind of rims did you use for the build......nice job

22" steel wheels... thanks!

[edflores]

What brand is the radiator?