Scott's hotrods shop truck - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jephs422 · 05-12-2010, 03:26 PM

the floor will be all in, braced, and welded by tomorrow. Once that's all in, they can start working on installing the new bolt in IFS. I can't wait to see it installed on the truck, not just the mock up.

Since Justin's putting a big block in it, the factory motor mounts won't work; with a small block though, the stock mounts will work!

Before the step notch can go in, the rear section of the floors going to have to come out. Hopefully they get that out and I'll get some shots.

Scottshotrods · 05-12-2010, 08:59 PM

We will have pics of the New Scotts Superslam Bolt in ifs on thursday and it looks
Killer.
Justin
www.scottshotrods.com

65Short · 05-13-2010, 09:41 PM

It's thursday night and no pics!

**N2TRUX** · 05-13-2010, 09:49 PM

Tic, tic, tic big boy. Where's the pics?

scotts62 · 05-13-2010, 10:39 PM

Well ill join in too for kicks

X3 on the pics

ksbrktracer · 05-13-2010, 10:54 PM

ME TOO..........I want some pictures.......!!!!!!

63burb · 05-13-2010, 11:05 PM

Scottshotrods · 05-13-2010, 11:35 PM

You guys crack me up we are doing the install on friday and the pics will be posted on
friday.We have been slammed the last couple of days at the shop no excuses but
customers come first.We are also getting ready for a show this weekend at the
goodguys show in costa mesa ca.Tune in on friday the pictures will be worth wating
for.
Justin
www.scottshotrods.com

**N2TRUX** · 05-14-2010, 07:58 AM

Customers...meh who needs em...

Seriously, we understand, but.....

Hottrucks · 05-14-2010, 08:50 AM

Quote:

Originally Posted by Scottshotrods

On our Scotts Super Slam ifs Bolt on ifs this will be the first bolt on ifs we do for this truck.We will be running the 14 inch drilled and slotted rotors with 6 piston red wilwood
caliper.The billet hub will have a 5 on 5 bolt pattern.The brakes are HUGE and look
BADD ASS.We will be showing you all of our new products for this truck.
Justin
www.scottshotrods.com

Justin what size wheel will be needed to work with this set up??

Guys as a customer of Scott's I will say they are great to work with they built a 1 off air ride for a 35 international 1 ton I built......keep in mind we are shores apart....after alot of pics and measurements the thing slid right under the truck wheel stance and width was perefect even considering I built the truck on Bud (dually) wheels and even with the old flat fenders everthing cleared.......

Nothing but thumbs up for these guys

I could be a salesman for these guys and always have a clear consious it a quailty product....but once you see there work you relize it sells itself

Jeff

1LoC10 · 05-14-2010, 09:14 AM

awesome build...man I wish I had money

scotts62 · 05-14-2010, 09:29 AM

We would if we didnt have so many projects..

astrochimp · 05-14-2010, 10:03 AM

I just wanted to post how nice this engine swap was- looks almost OE.

David

Quote:

Originally Posted by jephs422

daverod · 05-14-2010, 10:23 AM

Sweet build. Can't wait to see the finished product.:

Scottshotrods · 05-14-2010, 11:59 AM

Quote:

Originally Posted by Hottrucks

Justin what size wheel will be needed to work with this set up??

Guys as a customer of Scott's I will say they are great to work with they built a 1 off air ride for a 35 international 1 ton I built......keep in mind we are shores apart....after alot of pics and measurements the thing slid right under the truck wheel stance and width was perefect even considering I built the truck on Bud (dually) wheels and even with the old flat fenders everthing cleared.......

Nothing but thumbs up for these guys

I could be a salesman for these guys and always have a clear consious it a quailty product....but once you see there work you relize it sells itself

Jeff

Jeff
You will be able to run a 22 inch wheel and a 29 inch tall tire and it will lay frame.

We are laying out the ifs now to do the install today stay tune for some pictures.
Justin
www.scottshotrods.com

aggie91 · 05-14-2010, 02:58 PM

Looking good, can't wait for the pics of the front end.

How is the install going today?

jephs422 · 05-14-2010, 07:40 PM

Justin wanted me to post this up for you guys, and rather than just stick it in his Suburban thread, I thought I'd post up an install here. The only thing not finished are the shock mounts, and possibly rack notches if it needs them, but I think that we are good without the notches.

Here ya go, I'll let the pics explain most of it.

Here's everything before going in.

crossmember bolted to the table for assembly. It's easier to bolt it all together, then stick it in all in one piece.

pretty idiot proof so far

jephs422 · 05-14-2010, 07:40 PM

Justin wanted me to post this up for you guys, and rather than just stick it in his Suburban thread, I thought I'd post up an install here. The only thing not finished are the shock mounts, and possibly rack notches if it needs them, but I think that we are good without the notches.

Here ya go, I'll let the pics explain most of it.

Here's everything before going in.

crossmember bolted to the table for assembly. It's easier to bolt it all together, then stick it in all in one piece.

pretty idiot proof so far

jephs422 · 05-14-2010, 07:43 PM

On goes the rack..

and now it's ready to go..

All of this REALLY needs to come out!

jephs422 · 05-14-2010, 07:43 PM

On goes the rack..

and now it's ready to go..

All of this REALLY needs to come out!

jephs422 · 05-14-2010, 07:50 PM

pretty sure the last thing I need to do is post a bunch of pics on how to take out the old crossmember, so we;ll skip that part!

OK, she's about ready to go....

New unit is rolled into place. The guys ended up using a big pipe clamp to squeeze the frame a bit. makes it easier.

a few bolts here, a few bolts there.

These c-channel pieces really make a big difference when it comes to stiffening the frame up.

And we're just about done.

Stay tuned till Monday. The brakes, the shocks, and the notches will be in by then.

jephs422 · 05-14-2010, 07:50 PM

pretty sure the last thing I need to do is post a bunch of pics on how to take out the old crossmember, so we;ll skip that part!

OK, she's about ready to go....

New unit is rolled into place. The guys ended up using a big pipe clamp to squeeze the frame a bit. makes it easier.

a few bolts here, a few bolts there.

These c-channel pieces really make a big difference when it comes to stiffening the frame up.

And we're just about done.

Stay tuned till Monday. The brakes, the shocks, and the notches will be in by then.

Custom 68 · 05-14-2010, 08:17 PM

nice job guys...

LUCKIN-FOU · 05-14-2010, 08:45 PM

Good job, and Justin i'm not saying that because I'm your only friend! So when do we see the Square Body front end? What shows on the East Coast do you plan on hitting with the Burban?

bigbadjohn84 · 05-14-2010, 10:06 PM

nice man. another possibility. porters, scotts... hmm lol

05-12-2010, 03:26 PM	#51
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Re: Scott's hotrods shop truck the floor will be all in, braced, and welded by tomorrow. Once that's all in, they can start working on installing the new bolt in IFS. I can't wait to see it installed on the truck, not just the mock up. Since Justin's putting a big block in it, the factory motor mounts won't work; with a small block though, the stock mounts will work! Before the step notch can go in, the rear section of the floors going to have to come out. Hopefully they get that out and I'll get some shots. __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

05-12-2010, 08:59 PM	#52
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck We will have pics of the New Scotts Superslam Bolt in ifs on thursday and it looks Killer. Justin www.scottshotrods.com

05-13-2010, 09:41 PM	#53
65Short Registered User Join Date: Jul 2008 Location: Springfield, MO Posts: 35	Re: Scott's hotrods shop truck It's thursday night and no pics!

05-13-2010, 09:49 PM	#54
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Scott's hotrods shop truck Tic, tic, tic big boy. Where's the pics? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

05-13-2010, 10:39 PM	#55
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Scott's hotrods shop truck Well ill join in too for kicks X3 on the pics __________________ Scott 93 crew cab build Project 62

05-13-2010, 10:54 PM	#56
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Scott's hotrods shop truck ME TOO..........I want some pictures.......!!!!!!

05-13-2010, 11:05 PM	#57
63burb Registered User Join Date: Feb 2010 Location: Moreno Valley, California Posts: 92	Re: Scott's hotrods shop truck

05-13-2010, 11:35 PM	#58
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck You guys crack me up we are doing the install on friday and the pics will be posted on friday.We have been slammed the last couple of days at the shop no excuses but customers come first.We are also getting ready for a show this weekend at the goodguys show in costa mesa ca.Tune in on friday the pictures will be worth wating for. Justin www.scottshotrods.com

05-14-2010, 07:58 AM	#59
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Scott's hotrods shop truck Customers...meh who needs em... Seriously, we understand, but..... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

05-14-2010, 09:14 AM	#61
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Scott's hotrods shop truck awesome build...man I wish I had money __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

05-14-2010, 09:29 AM	#62
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Scott's hotrods shop truck We would if we didnt have so many projects.. __________________ Scott 93 crew cab build Project 62

05-14-2010, 10:23 AM	#64
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Scott's hotrods shop truck Sweet build. Can't wait to see the finished product.: __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

05-14-2010, 02:58 PM	#66
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Scott's hotrods shop truck Looking good, can't wait for the pics of the front end. How is the install going today? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

05-14-2010, 07:40 PM	#67
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Scott's Hotrods Bolt in IFS install.... Justin wanted me to post this up for you guys, and rather than just stick it in his Suburban thread, I thought I'd post up an install here. The only thing not finished are the shock mounts, and possibly rack notches if it needs them, but I think that we are good without the notches. Here ya go, I'll let the pics explain most of it. Here's everything before going in. crossmember bolted to the table for assembly. It's easier to bolt it all together, then stick it in all in one piece. pretty idiot proof so far __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

05-14-2010, 07:40 PM	#68
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Scott's hotrods shop truck Justin wanted me to post this up for you guys, and rather than just stick it in his Suburban thread, I thought I'd post up an install here. The only thing not finished are the shock mounts, and possibly rack notches if it needs them, but I think that we are good without the notches. Here ya go, I'll let the pics explain most of it. Here's everything before going in. crossmember bolted to the table for assembly. It's easier to bolt it all together, then stick it in all in one piece. pretty idiot proof so far __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030



Register or Log In To remove these advertisements.

05-14-2010, 07:43 PM	#69
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Re: Scott's Hotrods Bolt in IFS install.... On goes the rack.. and now it's ready to go.. All of this REALLY needs to come out! __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

05-14-2010, 07:50 PM	#71
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Re: Scott's Hotrods Bolt in IFS install.... pretty sure the last thing I need to do is post a bunch of pics on how to take out the old crossmember, so we;ll skip that part! OK, she's about ready to go.... New unit is rolled into place. The guys ended up using a big pipe clamp to squeeze the frame a bit. makes it easier. a few bolts here, a few bolts there. These c-channel pieces really make a big difference when it comes to stiffening the frame up. And we're just about done. Stay tuned till Monday. The brakes, the shocks, and the notches will be in by then. __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

05-14-2010, 08:17 PM	#73
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,937	Re: Scott's Hotrods Bolt in IFS install.... nice job guys... __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

05-14-2010, 08:45 PM	#74
LUCKIN-FOU I'M NOT SCARED I HAVE A PLASMA Join Date: Feb 2008 Location: The PLACE Posts: 172	Re: Scott's Hotrods Bolt in IFS install.... Good job, and Justin i'm not saying that because I'm your only friend! So when do we see the Square Body front end? What shows on the East Coast do you plan on hitting with the Burban? __________________ Lou Santiago US Navy Retired/World Traveler Car Builder/Welder/Airport Investigator garageinsidertv.com [FORUM] WORK IS FOR PEOPLE WHO CAN'T FISH. I GUESS I'M SCREWED BECAUSED I HATE FISHING.

05-14-2010, 10:06 PM	#75
bigbadjohn84 Registered User Join Date: Feb 2008 Location: Florala, AL Posts: 398	Re: Scott's Hotrods Bolt in IFS install.... nice man. another possibility. porters, scotts... hmm lol

Register or Log In To remove these advertisements.