Tricked-out Chevy six cylinder engines - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 02-13-2008, 08:02 AM

I am not familar with that site that sells an inliner like that, but I would like to see it myself.

baddawg65 · 02-13-2008, 09:37 AM

If I was going through that much work, I'd used a 292!

greg64 · 02-13-2008, 10:45 AM

Quote:

Originally Posted by baddawg65

If I was going through that much work, I'd used a 292!

Ya, I can't understand that either. That beautiful head on a 250.

Chevyman680063 · 02-13-2008, 12:42 PM

Hey guys, those pics that greg64 posted are of the Inline 6's that Sissells Automotive builds. That is the 300hp 300ft. lbs. of torque street inline. They also have another one that has I think around 400hp, it's their racing one. I believe the blue one is a 250 and the racing one, the red one, on their site is a 292. I found out about their motors in the June 2005 Hot Rod magazine I have. Here's a link to their site. If you go to the Catalog link and Engines & Components it will take you to those pics.

http://www.sissellsautomotive.com/

greg64 · 02-13-2008, 12:49 PM

You're absolutely right, chevyman. Now I remember (duh). I didn't bother with the 292 pictures because it's just running a stock modified head.

Unfortunately, I believe the run of heads that they did for the 6 are done.

Super73 · 02-14-2008, 03:58 AM

At some point I'm going to buy a 47-54 panel. I am planing on doing a large CI 6cyl with a turbo on it. My 63 LS1/4L80E set up is a ton of fun and gets the looks with the hood open, but I think opening the hood with a super clean 6cyl and turbo sitting there would really get some people..

manimal · 07-15-2008, 08:01 PM

anyone have pics of a 292 with air conditioning? I am getting ready to put one into my '75 and would like to keep the A/C. I may have to make my own brackets,just need to know what they look like first. Thanks
-Lance
BTW those are ALL great looking engines.

greg64 · 07-16-2008, 01:04 AM

Quote:

Originally Posted by manimal

anyone have pics of a 292 with air conditioning? I am getting ready to put one into my '75 and would like to keep the A/C. I may have to make my own brackets,just need to know what they look like first. Thanks
-Lance
BTW those are ALL great looking engines.

I can't find any pictures, but years ago Classic Trucks did a 292 build-up, which included A/C. They fabbed up their own bracket which located the compressor on the distributor side of the engine up high. They used the bolts at the front of the head (where the ground from the battery connects), and it seems to me that they had to make a notch for the #1 sparkplug.

Lane · 07-15-2008, 08:33 PM

I've got two 6's for sale. One with a TH350 and one with Powerglide. Both run - and I have pics. Or just check my photobucket below. In the truck and chevy II albums.

PM me if interested.

283 Man · 07-15-2008, 08:47 PM

This is my future tricked out 6 its 230

3 speed on column truck is a 1963 C-10 Shortbed fleetside love this truck cant wait get it payed for and back my house to work on it..

soba_03 · 07-16-2008, 06:19 AM

Mine...

MXmaniac · 07-16-2008, 12:04 PM

I'm planning on building up the 250 I'm putting in my '64. Eventually I'd like to do some head work(remove head bolt bosses from intake ports, bolt-in lump ports, SBC 1.60 and 1.94 valves, milled for compression), pistons from a 307 SBC for more compression, 268H cam, Offy water-heated 4bbl intake with a 390 Holley, and Stovebolt cast iron headers.

greg64 · 07-16-2008, 01:34 PM

Soba, I'm liking those carbs and manifold!

MXmaniac, sounds like a great buildup! I can vouch that the Offy manifold and Stovebolt headers are sweet. I'm waiting for Classic Inlines to build up a Chevy head, which is in their plans before getting more serious.

soba_03 · 07-16-2008, 04:39 PM

Greg,

Here is some thing to inspire ya...
www.vintagespeed.com

I love this site...

greg64 · 07-16-2008, 11:22 PM

Quote:

Originally Posted by soba_03

Greg,

Here is some thing to inspire ya...
www.vintagespeed.com

I love this site...

Thanks Soba. I've been on that site before, but it's been quite a while and it's nice to look at those parts again.

Makes me what to work on something really antique to warrant some of those parts.

What I really like the look of (not a Vintage Speed part, per se) is the Stromberg 97s that are really throttle body injection units, not carbs. Looks and EFI!

Frizzle Fry · 07-16-2008, 06:15 PM

Love it! I'm definately keeping the six in my 64. HEI soon and eventually an intake and headers. Where are you guys getting the hi-po stuff?

joeys66pickup · 07-16-2008, 06:41 PM

now im wondering if i should have given away that I6 for my 454ci....o hell ya it was worth it

but that dual carb'd sixer is a looker

soba_03 · 07-17-2008, 06:48 AM

Hey I got a question, I'm looking for a straight Thermostat housing. If you look at the thermostat housing on my 6 (post#59) I need a straight one. Mine has a slight curve to the passengers side. I need on straight out the front. If anyone has one shoot me a PM so I don't further Hijack this thread... Thanks

Green77c10 · 11-10-2008, 01:20 AM

what carbs are those soba?

jonzcustomshop · 11-10-2008, 02:46 AM

...

283 Man · 11-10-2008, 05:35 AM

Very Cool Model Jon looks so real

thanks for sharing with us all

vin63 · 11-10-2008, 11:08 AM

Here's my L6, that is currently for sale. I bolted up my unused shorty headers since someone bought my full-length headers awhile back...

kizer · 11-10-2008, 11:32 AM

I don't have any photos of it "yet", but my plan from day one has always been either dual or tri powered carb setup with a split exhaust.

Chevy 350 is cool and all, but I want the old school look of the L6

This NOT mine, but I've always liked the simple clean look of it.To bad its not running multiple Carbs, but its got something I like.

TimE · 11-10-2008, 02:35 PM

Diggin' the Roots blower above!!

joe231 · 11-11-2008, 09:23 PM

Quote:

Originally Posted by TimE

Diggin' the Roots blower above!!

me too! badass!
wonder what kinda numbers it puts up?

02-13-2008, 09:37 AM	#2
baddawg65 Registered User Join Date: Mar 2007 Location: wyoming Posts: 83	Re: Tricked-out Chevy six cylinder engines If I was going through that much work, I'd used a 292! __________________ l6 Performance Parts http://www.merchantamerica.com/chevy...ex.php?ba=home BOTHERS http://www.brotherstrucks.com/ LMC http://www.lmctruck.com/ Dash LEDs http://www.whitegauges.net/index.php

02-13-2008, 12:42 PM	#4
Chevyman680063 Registered User Join Date: Aug 2006 Location: Georgia Posts: 850	Re: Tricked-out Chevy six cylinder engines Hey guys, those pics that greg64 posted are of the Inline 6's that Sissells Automotive builds. That is the 300hp 300ft. lbs. of torque street inline. They also have another one that has I think around 400hp, it's their racing one. I believe the blue one is a 250 and the racing one, the red one, on their site is a 292. I found out about their motors in the June 2005 Hot Rod magazine I have. Here's a link to their site. If you go to the Catalog link and Engines & Components it will take you to those pics. http://www.sissellsautomotive.com/ Last edited by Chevyman680063; 02-13-2008 at 12:44 PM.

02-14-2008, 03:58 AM	#6
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Tricked-out Chevy six cylinder engines At some point I'm going to buy a 47-54 panel. I am planing on doing a large CI 6cyl with a turbo on it. My 63 LS1/4L80E set up is a ton of fun and gets the looks with the hood open, but I think opening the hood with a super clean 6cyl and turbo sitting there would really get some people..

07-15-2008, 08:01 PM	#7
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Tricked-out Chevy six cylinder engines anyone have pics of a 292 with air conditioning? I am getting ready to put one into my '75 and would like to keep the A/C. I may have to make my own brackets,just need to know what they look like first. Thanks -Lance BTW those are ALL great looking engines. __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

07-15-2008, 08:33 PM	#9
Lane Registered User Join Date: May 2007 Location: Fort Worth, TX Posts: 172	Re: Tricked-out Chevy six cylinder engines I've got two 6's for sale. One with a TH350 and one with Powerglide. Both run - and I have pics. Or just check my photobucket below. In the truck and chevy II albums. PM me if interested. __________________ My junk - http://s117.photobucket.com/albums/o60/Lane40/ www.wheelpros.com

02-13-2008, 08:02 AM	#1
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Tricked-out Chevy six cylinder engines I am not familar with that site that sells an inliner like that, but I would like to see it myself.

02-13-2008, 12:49 PM	#5
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: Tricked-out Chevy six cylinder engines You're absolutely right, chevyman. Now I remember (duh). I didn't bother with the 292 pictures because it's just running a stock modified head. Unfortunately, I believe the run of heads that they did for the 6 are done. __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

07-15-2008, 08:47 PM	#10
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Tricked-out Chevy six cylinder engines This is my future tricked out 6 its 230 3 speed on column truck is a 1963 C-10 Shortbed fleetside love this truck cant wait get it payed for and back my house to work on it..

07-16-2008, 06:19 AM	#11
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: Tricked-out Chevy six cylinder engines Mine... Attached Images

07-16-2008, 12:04 PM	#12
MXmaniac Registered User Join Date: Jan 2007 Location: Denton, Texas Posts: 356	Re: Tricked-out Chevy six cylinder engines I'm planning on building up the 250 I'm putting in my '64. Eventually I'd like to do some head work(remove head bolt bosses from intake ports, bolt-in lump ports, SBC 1.60 and 1.94 valves, milled for compression), pistons from a 307 SBC for more compression, 268H cam, Offy water-heated 4bbl intake with a 390 Holley, and Stovebolt cast iron headers. __________________ Andrew '69 C-20(292, 4-speed) Retired Daily Driver '64 C-10(250, 3-speed) Fixerupper '97 F*rd Mustang GT(4.6L, 5-speed) Daily Driver If I only wanted two pedals I'd have bought a bicycle.

07-16-2008, 01:34 PM	#13
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: Tricked-out Chevy six cylinder engines Soba, I'm liking those carbs and manifold! MXmaniac, sounds like a great buildup! I can vouch that the Offy manifold and Stovebolt headers are sweet. I'm waiting for Classic Inlines to build up a Chevy head, which is in their plans before getting more serious. __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

07-16-2008, 04:39 PM	#14
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: Tricked-out Chevy six cylinder engines Greg, Here is some thing to inspire ya... www.vintagespeed.com I love this site...

07-16-2008, 06:15 PM	#16
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Tricked-out Chevy six cylinder engines Love it! I'm definately keeping the six in my 64. HEI soon and eventually an intake and headers. Where are you guys getting the hi-po stuff?

07-16-2008, 06:41 PM	#17
joeys66pickup Dr. Frankenstein Join Date: Feb 2008 Location: beaverton,Or Posts: 458	Re: Tricked-out Chevy six cylinder engines now im wondering if i should have given away that I6 for my 454ci....o hell ya it was worth it but that dual carb'd sixer is a looker __________________ I Wanna Go Fast!!

07-17-2008, 06:48 AM	#18
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: Tricked-out Chevy six cylinder engines Hey I got a question, I'm looking for a straight Thermostat housing. If you look at the thermostat housing on my 6 (post#59) I need a straight one. Mine has a slight curve to the passengers side. I need on straight out the front. If anyone has one shoot me a PM so I don't further Hijack this thread... Thanks



Register or Log In To remove these advertisements.

11-10-2008, 01:20 AM	#19
Green77c10 Registered User Join Date: Apr 2008 Location: Portland, OR Posts: 70	Re: Tricked-out Chevy six cylinder engines what carbs are those soba?

11-10-2008, 02:46 AM	#20
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Tricked-out Chevy six cylinder engines ... Attached Images

11-10-2008, 05:35 AM	#21
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Tricked-out Chevy six cylinder engines Very Cool Model Jon looks so real thanks for sharing with us all

11-10-2008, 11:08 AM	#22
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Tricked-out Chevy six cylinder engines Here's my L6, that is currently for sale. I bolted up my unused shorty headers since someone bought my full-length headers awhile back... __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

11-10-2008, 11:32 AM	#23
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Tricked-out Chevy six cylinder engines I don't have any photos of it "yet", but my plan from day one has always been either dual or tri powered carb setup with a split exhaust. Chevy 350 is cool and all, but I want the old school look of the L6 This NOT mine, but I've always liked the simple clean look of it.To bad its not running multiple Carbs, but its got something I like. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary Last edited by kizer; 11-10-2008 at 11:34 AM.

11-10-2008, 02:35 PM	#24
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Tricked-out Chevy six cylinder engines Diggin' the Roots blower above!!

Register or Log In To remove these advertisements.