![]() |
![]() |
#51 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Ok... just a little update. Rick, I won't be able to use the mustang seatbelts for the reason that the belts themselves are just not long enough to mount in the floor and strap you in. Oh well... back to square one. I'll figure out something. Oh, got my stereo mounting figured out. The previous owner cut a hole in the dash to mount a newer style stereo and I think he used a beaver to cut it. It was pretty hacked. I tried to clean it up but just couldn't. Besides all of that, the hole was just too big so the deck wouldn't stay mounted. I wanted to come up with something that looked good and not cheesed. Here is what I came up with. I got ahold of some thick sheet metal and cut me a new flush-mount plate. I double-sided taped it to the dash so it would be clean looking without some goofy-looking screws holding it in. I think it looks ok, at least it's better than what was there to start with.
Later for now. D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#52 |
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: '67 step-side replacement rear bumper
Don,
Just Finished Re-reading your Entire Thread, It Truly is Hard to Believe this is the Same Truck you Started out With, Again i want to Congratulate you on a Well Done Build Thread that has Provided a Lot of Info that even a Novice could Benifit From. The Use of the Slick Sand & the Reskin of Bedsides are a Couple that Come to Mind........... Also Look Forward to Seeing How Your Wood bed Come's out with the Tip that you Gave me on Re-doing a Wood Bed, That Maybe something that you could Consider doing as a Seperate Thread . That May be something that could be of Use for a lot of us as a FAQ............. Did I Miss What you Plan on Running as a Wheel & Tire Combo on Your Truck, Might be Kinda Hard to Do Justice to that Beautiful Paint Job......... Having People Like you who are willing to share your Experience & Wisdom on Redoing a Project is what Make this Board Great to be a Part of, Let me Know if & what you Come up with for Seatbelts........... Glad to see the Use of White Interior Trim also, The 67 Fleet i Recently Bought was In White & Took a Little Getting used too, I really like it Now. Again I say Thanks for Sharing, Sorry if This Post Seem's Rambling, Just Had a Lot of Thought's too Share.......... Rick Here is Pic of My White Interior on the Fleet........
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
![]() |
![]() |
![]() |
#53 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Hey Rick, the "tricks-of-the-trade" and tips I am sharing are not secrets. They are simply the tools of the trade and things I have personally found over the years to work great. I am gratful to those who over the years have taken the time to teach me what they know about restoration and custom work. That being said, I am more than willing to pass on to others what I do know or at least my opinion, at least I might be able to shed light on a different way of doing something.
Take Slick Sand for instance. It's an over-the-counter product available at any automotive autobody supply store. I personally believe it is not pushed as the wonderful product that it is. If you are working on any old sheetmetal, you really need this stuff. It's like $60.00 a gallon and well worth every penny. Every part on my truck has seen a few coats of this stuff. It truly makes every imperfection go away. Now granted, it means an extra step in blocking, but as you can see, the results are well worth the extra effort. I guess what I am saying is, if you are going to "restore" your truck, then go the extra mile. I mean, what can it hurt? Invest in a small compressor and cheap spray gun and stop buying the crap that comes out of spray cans. You guys have no idea now much it pains me watching you post pics of spray bombed parts in the build section and then spend 1000's on tires and rims and engines. Rims won't rust... spray bombed parts will... eventually. Rick, I am looking for just the right rims to accent the truck. The ones that are on it are just for now. They are ok for the time being. I wanted my money for now to go to getting this beast back on the road. The rims will come later, once I am happy with the way the body/driveline is working. Also Rick, I will take your advice, I will post pics of the bed wood in the facts page of this website. Make it an "how-to" if you will. Will be interesting to see how it turns out. I got my carpet put in today and I am really pleased with the results. Ben at Lad's did an awesome job. I posted pics of the install. Got my tank in and the seat. It's really nice to see this come together after being apart for almost a year. If you guys have any questions on "how-to" kinda stuff, drop me a line at Richard8971@aim.com. I'll do the best I can to help. Later for now. Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 11-03-2007 at 02:58 AM. |
![]() |
![]() |
![]() |
#54 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
The day has arrived! I am officially done painting my truck. The doors got shot today. Nothing else needs to be painted. I posed pics, so I hope you enjoy. I have new weatherstriping comming from LMC and it should be here this week. I can get the final assembly squared away once the doors are on. Just have the wiring harness to put back in and the bed wood as far as cosmetics go, but I still need to get my drive shaft remade and put in as well as hook up the 700R4. Little things I guess...
Hey, a quick question... Does anyone know where I can get a replacement VIN sticker that you see inside the glove box door? Any information would be awsome. Later for now, Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 11-08-2007 at 12:26 AM. |
![]() |
![]() |
![]() |
#55 |
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: '67 step-side replacement rear bumper
![]() I bet you are one Happy Man about Now, Looking Forward to Rest of the Build.................. Rick
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
![]() |
![]() |
![]() |
#56 |
Registered User
Join Date: Nov 2006
Location: Springfield/Kansas City
Posts: 1,842
|
Re: '67 step-side replacement rear bumper
About the glovebox sticker, I forget his name but a guy on here makes them and they look just like the original. Start a thread in the 67-72 message board and I'm sure someone will know his name.
|
![]() |
![]() |
![]() |
#57 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: '67 step-side replacement rear bumper
It's "chipflyer" and yeah, the look really nice. I bought one from him a couple weeks ago.
Truck is looking great!
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#58 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Sweet, thank you gentlemen. I will write to him and see what he would charge me. I'm ready to put the doors on so I will post pics once they are on. Later!
Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#59 |
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: '67 step-side replacement rear bumper
Nice work, the truck looks GREAT!!!
__________________
![]() 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
![]() |
![]() |
![]() |
#60 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
AAAARRRRUUUGGGGHHHHHH!!!!! Ugh, I hung the doors today and the passenger door doesn't want to fit correctly. It's scratching the rocker panel and can't be raised up any more.... Son of a B****!!!! Didn't I just hang these darn things BEFORE I painted them???? You know what??? I truly believe someone switched doors on me after I fitted these things.... I mean, I spent an entire weekend hanging and fitting the doors BEFORE I painted them.
I need a beer... or two... maybe three... I hate this d*** truck sometimes... I'll let you know what happens... ![]()
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 11-11-2007 at 12:01 AM. |
![]() |
![]() |
![]() |
#61 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: '67 step-side replacement rear bumper
That really SUX!
![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#62 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Ok, got the doors aligned today. I forgot that I had to shim the right upper hinge to get the passenger door to align correctly. I put the left door "innards" in with the windows and door panel. The same guy who used the beaver to cut the stereo hole also used it to cut the holes in the bottoms of the doors for 6 x 9's. (You should have to have a licence to buy a saw's-all) I'm having kick panels made to cover the lower part of the doors. I will put speakers in the doors but at least when I do it, it will look a whole lot cleaner. That's why the bottom of the doors are not painted, they will be covered. It will be nice to have this thing together soon, so I can touch up all the chips and scratches from shop damage and reassembly screw-ups.
Now I'm screwing around with my hood hinges and scratching my head as to why my hood won't sit flush when I close it. (It will sit flush when I push down on the back of the hood after it's down) I seem to remember that it closed ok before I took it apart... ![]() Many beers sound good tonight... Later for now, Don Hey, just FYI... the horse to the left is one of mine. (We have three) Her name is Kitty and she loves to stand around and let her tougne hang out. I love that photo, it reminds me of how I often feel after a day of work at the shop....
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 11-12-2007 at 10:25 PM. |
![]() |
![]() |
![]() |
#63 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Well the sun was out for a little bit today so I snapped some pics. Almost there...
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#64 |
Senior Member
![]() Join Date: May 2005
Location: New Brunswick, Canada
Posts: 587
|
Re: '67 step-side replacement rear bumper
Don,
Try this method by Huck to get your hood down in the back. It worked great for me. To get the back down with existing hinges---open hood----loosen the three bolts that attach hinge to fender (both sides). Now push the hood up till the hinges stop moving, ---now push it open a bit more to preload the hinges. Tighten hinges. (two people make it a lot easier--hehehe) now carefully lower the hood--this may take a few adjustments to get it to sit just right (height wise). You may need to adjust the hood front to rear to allow for proper clearance with the cowl. As far as pop up---these hinges have like 6-8 pivot points that should be clean and lubed for best action. Sometimes you can get them to pop up a bit but not necessarly. Flush out the hinge pivot points and lube with oil or lithum grease. Should be fine~~. |
![]() |
![]() |
![]() |
#65 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Duh, I forgot about doing this. I guess when you don't work on them everyday, you space some of the details. Worked great! Thank you.
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#66 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Hey Rick, I found out something recently... I can't use floor mounted shoulder seatbelts in my truck. Wanna know why? The stupid tank prevents mounting the unit in the floor. I knew I should have moved it... Darn lack of funds. Ugh. I give up. I guess I can live with lap belts and a shoulder clip-in type belt. I'm sure someone makes them. I mean hell, the cab has the holes in the top for the shoulder belts. Anyone know of anything?
I need to invest stock in Budweiser... many more beers sound good tonight. j/k... well one or two won't hurt... maybe three or four... Later Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#67 |
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: '67 step-side replacement rear bumper
Don,
Where u Been hiding, Last i Heard u were gonna Have a Couple Buds ![]() Rick
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
![]() |
![]() |
![]() |
#68 |
Registered User
Join Date: Nov 2006
Location: lafayette, ga.
Posts: 832
|
Re: '67 step-side replacement rear bumper
That Is Looking Great!!!! Cant Wait To See The Finished Product. """"good Luck""""
__________________
![]() It must be fought for, protected, and handed on for them to do the same.... Ronald Reagan |
![]() |
![]() |
![]() |
#69 | |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Quote:
I'll start measuring and cutting tomorrow and I will post pics. If this goes according to plan, it will look awesome and I will have saved mucho $$$. Later, Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
|
![]() |
![]() |
![]() |
#70 |
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: '67 step-side replacement rear bumper
Good Luck with the Bed, Look Forward to seeing the Pics & Write up if Possible........
Rick
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
![]() |
![]() |
![]() |
#71 |
Registered User
Join Date: Nov 2007
Location: Chamberlain, SD
Posts: 183
|
Re: '67 step-side replacement rear bumper
My Sons rear bumper is aftermarker I think...
|
![]() |
![]() |
![]() |
#72 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Oh good grief... not exactly what I had in mind...
![]()
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
![]() |
![]() |
![]() |
#73 |
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: '67 step-side replacement rear bumper
That's Worse than what you Took off, I posted a Link to your Thread in another Thread Questioning What to Do About Wood Bed.............
Hope you Don't Mind, Just want to Help save someone else a Little Money, Here is the Link................Wood Bed Rick
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
![]() |
![]() |
![]() |
#74 |
Registered User
Join Date: Nov 2006
Location: lafayette, ga.
Posts: 832
|
Re: '67 step-side replacement rear bumper
WITH WHAT YOU ARE DOING, YOU DEFINITLY DO NOT NEED A BUMPER LIKE THAT. I WAS TOLD THAT S10 SEAT BELTS WORK IN THESE TRUCKS, INCLUDING THE SHOULDER HARNESS. SOME ONE ON HERE SHOULD HAVE DEFINITE ANSWER
__________________
![]() It must be fought for, protected, and handed on for them to do the same.... Ronald Reagan |
![]() |
![]() |
![]() |
#75 | |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: '67 step-side replacement rear bumper
Quote:
D
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|