VA PRICES REDUCED Nice Cab, frame, bed and 70 truck part out

[Whittaker]

No I don't really need the actual carrier bearing it self as long as I have the front that is ok where it rides in the bearing then the yoke that slides on the shaft behind the bearing. I need 1 that the splines and shaft the bearing rides on are little over 1 inch.

Yes a 3sp manual shaft should work fine.
Posted via Mobile Device

[VA72C10]

Originally Posted by Whittaker

No I don't really need the actual carrier bearing it self as long as I have the front that is ok where it rides in the bearing then the yoke that slides on the shaft behind the bearing. I need 1 that the splines and shaft the bearing rides on are little over 1 inch.

Yes a 3sp manual shaft should work fine.
Posted via Mobile Device

will take it out and measure/take pics fri or sat

[Whittaker]

What do you want for it?
Posted via Mobile Device

[dmw319]

do you still have the bench seat with really good foam for sale? if so, pics? thanks

[VA72C10]

Originally Posted by Whittaker

What do you want for it?
Posted via Mobile Device

I'll have to figure shipping after I measure and weigh it but maybe 40 plus shipping?

Originally Posted by dmw319

do you still have the bench seat with really good foam for sale? if so, pics? thanks

yes, I can take pictures this evening (late). It's full foam and the cover only has minor tears. It's had another cover over it for years which has protected it...

[dmw319]

Originally Posted by VA72C10

I'll have to figure shipping after I measure and weigh it but maybe 40 plus shipping?



yes, I can take pictures this evening (late). It's full foam and the cover only has minor tears. It's had another cover over it for years which has protected it...

awesome. ive been looking for one for my 1970 so hopefully ill like this one! shipping to Raleigh, NC might be kinda pricey though. Maybe we could meet halfway if it comes to it

[VA72C10]

Originally Posted by dmw319

awesome. ive been looking for one for my 1970 so hopefully ill like this one! shipping to Raleigh, NC might be kinda pricey though. Maybe we could meet halfway if it comes to it

shipping would be pretty high...I shipped a blazer rear seat recently and it weighed a lot less than a truck bench and still was around 150 for shipping (including the box I bought for it)...without brackets on it.

I do have a new cover for it (actually two) correct 1970 scroll pattern in black if you're planning on re-covering it...and could have it professionally installed for 150 if you were interested (you can also install it yourself of course)...one cover was a truckseats cover and the other was from LMC. 250 for the truckseats cover (Nicer material and french seams) and 175 for the LMC one...

[dmw319]

Originally Posted by VA72C10

shipping would be pretty high...I shipped a blazer rear seat recently and it weighed a lot less than a truck bench and still was around 150 for shipping (including the box I bought for it)...without brackets on it.

I do have a new cover for it (actually two) correct 1970 scroll pattern in black if you're planning on re-covering it...and could have it professionally installed for 150 if you were interested (you can also install it yourself of course)...one cover was a truckseats cover and the other was from LMC. 250 for the truckseats cover (Nicer material and french seams) and 175 for the LMC one...

yea man im definitely interested! I could probably handle the install myself, but shoot me those pictures for sure!

[VA72C10]

Originally Posted by dmw319

yea man im definitely interested! I could probably handle the install myself, but shoot me those pictures for sure!

pictures...

[VA72C10]

One more of the underside which to me is amazingly clean and then the covers.
Posted via Mobile Device