AL GIANT 60-66 parts Stash Barn Find!!

[GMCNUT]

Originally Posted by niterider65

I would sure like an original rear step bumper if possible an a choke cable also for the 65 thanks
Bill

you are 3rd in line for the only chrome fleetside rear bumper we got - the choke cable we do have - 20.00 on the choke cable shipped

[GMCNUT]

Originally Posted by niterider65

darn almost for got also looking for an dash speaker mount and radio mount for the dash if have to ill buy the radio for the mount Thanks

Not sure we have this speaker assembly or not - all these trucks had a replacement radio but sometimes the factory speaker is still in them - will check and see

[GMCNUT]

Originally Posted by Modges'66

I'm looking for a decent frt crossmember for a 66 1/2 ton...

Hmmm....that seems like a strange request - do you mean the engine crossmember or a crossmember for the bed?

[GMCNUT]

Originally Posted by Hardrockz28

Need a tail gate and all hardware for 66 fleet side
Posted via Mobile Device

Got a lt Blue fleet tailgate w/ chains but it does have some rot - real straight but has a couple rotted spots on the bottom - how nice does it need to be? We can make you a good deal on this one but will be expensive to ship

[GMCNUT]

Originally Posted by AngryPirate

How much for the instrument cluster?

The 60-63 cluster has a broken speedo needle and is 30.00 but I think we have another one w/ good speedo needle for 50.00

We also have a 64-66 for 50.00

50.00 clusters have all wiring uncut too.

Not sure which one you need?

[GMCNUT]

Originally Posted by rideblue00

Looking for a 4 pc set of fleetside rear bumper brackets for my 66.

We have the chrome rear bumper for sale for 100.00 but I had three other requests for info on it, and replied to all earlier so you are 4th in line - this is the only set of brackets I have currently but know where another set is and may try to go Tuesday and fetch them since several have asked

[GMCNUT]

Originally Posted by stevenb

How much for a short fleetside bed, what condition is it in?
Posted via Mobile Device

We only have 1 SWB fleet bed and another member has inquired about it first so we have to see if they take it first but I priced it at 450.00 and it is complete w/ plywood floor. Send your email and I will send you the pics and we'll see if the other member takes it or not - you are 2nd in line if not

[AngryPirate]

Originally Posted by GMCNUT

The 60-63 cluster has a broken speedo needle and is 30.00 but I think we have another one w/ good speedo needle for 50.00

We also have a 64-66 for 50.00

50.00 clusters have all wiring uncut too.

Not sure which one you need?

My truck is a 61, but if the 64-66 fits and works, then lets roll with that as it has more gauges built into the dash itself and the uncut harness wiring would be nice too.

Should I wait to here back from you or Sweptline about the dash sheetmetal as well (via PM)?

If you want me to just send payment for the dash cluster, then we can do that for now.

Thanks,
AP

[GMCNUT]

Originally Posted by LostMy65

How much for something, I mean anything....?
Posted via Mobile Device

Well, apologies - with a 7 truck stash and over 200 parts all in one wad there was just no good way to price every single piece without taking up the whole parts board so I decided it was in everyones best interest to let everybody view the 200+ shots and start asking questions and go from there until I can figure out a cleaner way.....

[LostMy65]

Originally Posted by GMCNUT

Well, apologies - with a 7 truck stash and over 200 parts all in one wad there was just no good way to price every single piece without taking up the whole parts board so I decided it was in everyones best interest to let everybody view the 200+ shots and start asking questions and go from there until I can figure out a cleaner way.....

I was just yanking your chain.

[GMCNUT]

Originally Posted by LostMy65

At least the Lights, Wipers, and the other one of the three that I can't remember what it does right at this moment.

lights wiper and choke - lights I have, wiper can be deluxe w/ 2 speed wiper washer squirter in the center or no squirter button for single speed wipers. Need to know what wiper motor you have. The Choke is maybe there but no sure - headlight knob = 5.00 wiper w/ no squirter = 5.00 w/ squirter knob only comes with a switch so 15.00 and choke if I have it is 20.00 and comes w/ cable.

Shipping will be like 6 bucks or so....

[GMCNUT]

Originally Posted by AngryPirate

My truck is a 61, but if the 64-66 fits and works, then lets roll with that as it has more gauges built into the dash itself and the uncut harness wiring would be nice too.

Should I wait to here back from you or Sweptline about the dash sheetmetal as well (via PM)?

If you want me to just send payment for the dash cluster, then we can do that for now.

Thanks,
AP

OK - here are the problems

1) the 64-66 dash will only work if you replace the whole underdash harness - it is all different than 60-62.
2) the hole for the dash cluster is shaped different on 60-63 than 64-66 so I do not think they will smoothly interchange anyway.

So you should probably stick to a 60-62 dash like the 50.00 one I said does have the wiring and good speedo needle

On the dash sheetmetal I took pics of a nice 1960 dash that may work for you - just need your email to send them and see what you think.

[AngryPirate]

Originally Posted by GMCNUT

OK - here are the problems

1) the 64-66 dash will only work if you replace the whole underdash harness - it is all different than 60-62.
2) the hole for the dash cluster is shaped different on 60-63 than 64-66 so I do not think they will smoothly interchange anyway.

So you should probably stick to a 60-62 dash like the 50.00 one I said does have the wiring and good speedo needle

On the dash sheetmetal I took pics of a nice 1960 dash that may work for you - just need your email to send them and see what you think.

Roger on the dash. We'll go with the 50.00 60-62 cluster.

PM sent for other details.

Thanks again.

[LostMy65]

Originally Posted by GMCNUT

lights wiper and choke - lights I have, wiper can be deluxe w/ 2 speed wiper washer squirter in the center or no squirter button for single speed wipers. Need to know what wiper motor you have. The Choke is maybe there but no sure - headlight knob = 5.00 wiper w/ no squirter = 5.00 w/ squirter knob only comes with a switch so 15.00 and choke if I have it is 20.00 and comes w/ cable.

Shipping will be like 6 bucks or so....

I'll pass.
Thanks

[62 short step]

Originally Posted by GMCNUT

We have a 6 cyl metal shroud and I think we have a set of factory V8 shroud brackets but no V8 shroud. The V8 shroud braces are 30.00 for the set. They are getting particularly hard to find anymore and I think out of 7 trucks we only got one set....shipping determined from your zip code after I box them, but shouldn't be much 10 to 15 bucks to get them shipped on Priority or approx 1/2 that for Parcel post

I'll take the v 8 shroud brackets, pending shipping price to 70739.

Thanks, Jeremy.

[duallyjams]

Thanks anyway. I have 2 trucks. I just bought one 100 shipped.I will keep looking.

Originally Posted by GMCNUT

Apologies for the high price, but I sold two of these for 400.00 each on Ebay last year after I cleaned them up and repainted them and made sure they worked and included a new master cyl and used pwr brake pedal pad. I intend to do the same to this one and put it on Ebay too, but if you are OK with the price I will still do all the cleanup and buy the new master cyl etc just like it would be for Ebay - normally when you buy an original booster, it does not work - when they do not work you have to send them off to be rebuilt. Rebuilding is 250.00 to 350.00 depending on what it needs so that is why the considerable expense for a working 100% complete unit. It also has 100% of its original and corrrect marked bolts and hardware. Think about it, and weigh your options and let me know.

[LT1 Burb]

Do you know if that bumper is for a stepside or fleetside and does it look like a repop or original, my zip is 97495.

[MisterC]

Originally Posted by GMCNUT

The side trim is very nice and is being sold as a 100% complete ready to be polished set - appears to be pretty close to ding free if not.....175.00 for the complete set and that includes the short fleet box pieces.

Is that price shipped? If not, shipping to 93277 please.

[GMCNUT]

Originally Posted by 62 short step

I'll take the v 8 shroud brackets, pending shipping price to 70739.

Thanks, Jeremy.

No problem - I will get them removed and packed so we can see what size box will ship them. I recommend USPS parcel post over priority because its a lot cheaper - will let you know

[GMCNUT]

Originally Posted by duallyjams

Thanks anyway. I have 2 trucks. I just bought one 100 shipped.I will keep looking.

if you got a restored working booster w/ new master cyl and pwr brake specific pedal arm and pad for 100.00 then you definitely got a deal no doubt. Used unrestored boosters go for that if incomplete or non-working

[niterider65]

I'l take the coke cable just let me know about the rest
Thanks
Bill

[65Okasai]

Fleetside tailgates?
Posted via Mobile Device

[darkhorse970]

I will pass on the steering column.

[GMCNUT]

Originally Posted by 62 short step

I'll take the v 8 shroud brackets, pending shipping price to 70739.

Thanks, Jeremy.

picking up your brackets in the AM

[GMCNUT]

Originally Posted by 65Okasai

Fleetside tailgates?
Posted via Mobile Device

We did not fare too well on Fleet tailgates - we have one but it does have some pretty bad rot through on one side down low - its only 75.00 as a result of the two finger sized holes but it is straight I figure the shipping will cost a ton on something like that....