Please post pictures of your C10 w/US Mags Rambler rims - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Colt_1911 · 12-18-2018, 04:07 PM

New stance, same wheels!

johnny209 · 12-18-2018, 09:37 PM

Here are mine. 22x11 &22x9

rjs53 · 12-19-2018, 09:28 PM

Quote:

Originally Posted by Colt_1911

New stance, same wheels!

Is your truck bagged or static drop?

rjs53 · 12-20-2018, 06:04 PM

Anyone running these with an 8.5" wheel on the front? Backs easy to get back space but fronts a little different

Sharptrans · 12-20-2018, 07:09 PM

Here you go

2014sierraAT · 12-24-2018, 05:56 PM

20’s & 22’s

**KevinK7** · 12-26-2018, 09:51 AM

I know I love the look of these wheels, but damn these trucks look great

rjs53 · 12-26-2018, 11:38 AM

Quote:

Originally Posted by Colt_1911

New stance, same wheels!

Did you bag this truck and what BS are the wheels? It looks awesome

YBNORML · 12-26-2018, 03:14 PM

Heres my 72' K5 with 20/22 ramblers. The truck has a simple bag job with a bolt in notch.

Fronts are 20x8 with 4-1/2" BS
Rears are 22x9 with 5" BS

rjs53 · 12-26-2018, 03:16 PM

Very Nice! Happy New Year

70sangersean · 04-19-2019, 10:15 AM

Hi everyone. I posted a thread about the CPP spindles (non modular) and track width, but got no answers. So I figured I'd rephrase my question and ask it here. I have a 71 C10 and plan on running the 20" rambler wheel with a 4.5/6 drop. From what I've read ideal BS for a 20x8.5 wheel with that drop is 5.25-5.5. The rambler wheel only comes in 20x8 with a 4.5 BS. I am going to be ordering PBFab control arms and am trying to figure out if it would be better to get the 1" narrow ones. Anybody using those spindles (CP4S4-3) and that drop with the 20" rambler wheel ? Or with any input on the matter ?
much thanks

70sangersean · 06-25-2019, 03:22 PM

Nobody has any input ? Anyone run the 20x10.5 on the rear ? What modifications if any ?

rjs53 · 06-25-2019, 04:11 PM

So I have the 20x10/w 5.5" bs. I also have a 69 so the rear end is narrower. I had to use .5"spacers, 3/4 would be perfect but dont like that idea. The same wheel on your truck would be perfect bit not sure about the 10.5". You might have to massage the outer wheel well a little. I got nothing for you on the front with the control arm. Mine has stock arm and running a 8.5"wheel with no problems. I would think your arms might have a better fit, but not sure.

2014sierraAT · 06-25-2019, 05:29 PM

I have the 22x11 in the rear and had to run 3/4” spacers and only have about 1/2” clearance between the inner fenders. I have the 71-72 axle. I was leary about running spacers that big but I had a set of hub centric spacers made so it isn’t putting all the stress on long studs. I’ve put 4 or 5k miles on them with no issues.

70sangersean · 06-25-2019, 08:08 PM

Thanks for the input guys. So neither of you had to widen the tubs ? Don't really want to but would if that's what it takes.

2014sierraAT · 06-25-2019, 08:30 PM

My tubs are factory. As far as the front end, I have the 20x8 4.5” BS. On 3/5 drop and I’ve got no fitment issues.

ls1nova71 · 06-26-2019, 12:05 AM

Here's mine. 20x8 and 20x9.5.

70sangersean · 06-26-2019, 10:21 AM

Quote:

Originally Posted by 2014sierraAT

My tubs are factory. As far as the front end, I have the 20x8 4.5” BS. On 3/5 drop and I’ve got no fitment issues.

Can you see any potential issues in the front with a 4.5" drop ? What size tire are you running ? Thanks

EagleChief · 06-26-2019, 01:38 PM

Quote:

Originally Posted by wshattuck

hey SOCO... I know that orange beauty! here's another one...

Truck goals, right there! Damn! That is what mine looks like in my head... now I have an actual idea of what it really looks like.

Very nice truck!

2014sierraAT · 06-26-2019, 04:53 PM

Quote:

Originally Posted by 70sangersean

Can you see any potential issues in the front with a 4.5" drop ? What size tire are you running ? Thanks

255/40/20, it’s hard to tell man. You will just have to do some measuring especially since you plan on running aftermarket control arms. The clearance I’ve got is on factory length arms. I’ll attach a close up pic of the front end just to give you an idea anyway.

2014sierraAT · 06-26-2019, 04:55 PM

Quote:

Originally Posted by EagleChief

Truck goals, right there! Damn! That is what mine looks like in my head... now I have an actual idea of what it really looks like.

Very nice truck!

X2, woah that thing is perfect.

70sangersean · 06-26-2019, 07:45 PM

Quote:

Originally Posted by 2014sierraAT

255/40/20, it’s hard to tell man. You will just have to do some measuring especially since you plan on running aftermarket control arms. The clearance I’ve got is on factory length arms. I’ll attach a close up pic of the front end just to give you an idea anyway.

👍 thanks again.

SCOTI · 01-20-2020, 06:09 PM

Curious for those that have these wheels.... How do the front 'center cap' area of the wheel attach? Are they actually part of the wheel or an actual cap?

68Stepbed · 01-21-2020, 09:58 AM

Quote:

Originally Posted by SCOTI

Curious for those that have these wheels.... How do the front 'center cap' area of the wheel attach? Are they actually part of the wheel or an actual cap?

It's a push-in cap.

SCOTI · 01-21-2020, 11:03 AM

Quote:

Originally Posted by 68Stepbed

It's a push-in cap.

Clipped in place or O-ring? Is the cap just chromed plastic?

12-18-2018, 04:07 PM	#51
Colt_1911 Registered User Join Date: Aug 2017 Location: Washington State Posts: 26	Re: Please post pictures of your C10 w/US Mags Rambler rims New stance, same wheels! Attached Images

12-18-2018, 09:37 PM	#52
johnny209 Registered User Join Date: Nov 2014 Location: angels camp Posts: 38	Re: Please post pictures of your C10 w/US Mags Rambler rims Here are mine. 22x11 &22x9 Attached Images

12-20-2018, 06:04 PM	#54
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: Please post pictures of your C10 w/US Mags Rambler rims Anyone running these with an 8.5" wheel on the front? Backs easy to get back space but fronts a little different __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

12-20-2018, 07:09 PM	#55
Sharptrans Registered User Join Date: Feb 2018 Location: Red Hook NY Posts: 130	Re: Please post pictures of your C10 w/US Mags Rambler rims Here you go Attached Images

12-24-2018, 05:56 PM	#56
2014sierraAT Registered User Join Date: Aug 2018 Location: Fort Smith, Arkansas Posts: 163	Re: Please post pictures of your C10 w/US Mags Rambler rims 20’s & 22’s Attached Images

12-26-2018, 09:51 AM	#57
KevinK7 Senior Member Join Date: Oct 2017 Location: Hudson Valley, New York Posts: 649	Re: Please post pictures of your C10 w/US Mags Rambler rims I know I love the look of these wheels, but damn these trucks look great

12-26-2018, 03:14 PM	#59
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,850	Re: Please post pictures of your C10 w/US Mags Rambler rims Heres my 72' K5 with 20/22 ramblers. The truck has a simple bag job with a bolt in notch. Fronts are 20x8 with 4-1/2" BS Rears are 22x9 with 5" BS Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

12-26-2018, 03:16 PM	#60
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: Please post pictures of your C10 w/US Mags Rambler rims Very Nice! Happy New Year __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

04-19-2019, 10:15 AM	#61
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Please post pictures of your C10 w/US Mags Rambler rims Hi everyone. I posted a thread about the CPP spindles (non modular) and track width, but got no answers. So I figured I'd rephrase my question and ask it here. I have a 71 C10 and plan on running the 20" rambler wheel with a 4.5/6 drop. From what I've read ideal BS for a 20x8.5 wheel with that drop is 5.25-5.5. The rambler wheel only comes in 20x8 with a 4.5 BS. I am going to be ordering PBFab control arms and am trying to figure out if it would be better to get the 1" narrow ones. Anybody using those spindles (CP4S4-3) and that drop with the 20" rambler wheel ? Or with any input on the matter ? much thanks

06-25-2019, 03:22 PM	#62
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Please post pictures of your C10 w/US Mags Rambler rims Nobody has any input ? Anyone run the 20x10.5 on the rear ? What modifications if any ?

06-25-2019, 04:11 PM	#63
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: Please post pictures of your C10 w/US Mags Rambler rims So I have the 20x10/w 5.5" bs. I also have a 69 so the rear end is narrower. I had to use .5"spacers, 3/4 would be perfect but dont like that idea. The same wheel on your truck would be perfect bit not sure about the 10.5". You might have to massage the outer wheel well a little. I got nothing for you on the front with the control arm. Mine has stock arm and running a 8.5"wheel with no problems. I would think your arms might have a better fit, but not sure. __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

06-25-2019, 05:29 PM	#64
2014sierraAT Registered User Join Date: Aug 2018 Location: Fort Smith, Arkansas Posts: 163	Re: Please post pictures of your C10 w/US Mags Rambler rims I have the 22x11 in the rear and had to run 3/4” spacers and only have about 1/2” clearance between the inner fenders. I have the 71-72 axle. I was leary about running spacers that big but I had a set of hub centric spacers made so it isn’t putting all the stress on long studs. I’ve put 4 or 5k miles on them with no issues.

06-25-2019, 08:08 PM	#65
70sangersean Registered User Join Date: Feb 2012 Location: west covina CA Posts: 30	Re: Please post pictures of your C10 w/US Mags Rambler rims Thanks for the input guys. So neither of you had to widen the tubs ? Don't really want to but would if that's what it takes.

06-25-2019, 08:30 PM	#66
2014sierraAT Registered User Join Date: Aug 2018 Location: Fort Smith, Arkansas Posts: 163	Re: Please post pictures of your C10 w/US Mags Rambler rims My tubs are factory. As far as the front end, I have the 20x8 4.5” BS. On 3/5 drop and I’ve got no fitment issues.

06-26-2019, 12:05 AM	#67
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Please post pictures of your C10 w/US Mags Rambler rims Here's mine. 20x8 and 20x9.5. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html



Register or Log In To remove these advertisements.

01-20-2020, 06:09 PM	#73
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: Please post pictures of your C10 w/US Mags Rambler rims Curious for those that have these wheels.... How do the front 'center cap' area of the wheel attach? Are they actually part of the wheel or an actual cap? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

Register or Log In To remove these advertisements.