Parting a 71 blazer 4x4 now

[rigon4]

if it is not taken i need the filler neck from gas cap to the first hose.

[jay_shy]

Interested in the throttle cable if it is the same for 4X4 truck. I do know that 2wd and 4wd are different.

shipped to 16635
Jason

[BLAZERMAN]

Randy, I'm interested in the front bumper.

[nathaniel_n85]

How much for the console and mounting brakets for the bucket seats?

[danw210]

If this is a short water pump I'll take the PS pump and brackets. I need the the water pump pulley and crank pulleys too. Shipping to 60050?

[low'n slow]

How are rear edges of the rear fenders?

[72ironmike]

Randy, Interested in rear bump braces for 4x4 if they make it this far & possibly the underside brackets for the bucket seats if they are totally solid. Thanks. Mike

[teeitup]

Too Much Stuff, Eric, emblems have some pitting on the blazer, motor emblems one is a 350 and one is a 400. $10 for all them, transfer knob, is not beat up but the shine is off it and white letters are faded $20 for it plus ship. Only has outer rear bumper brackets, inner ones and part of the frame. $30 plus for the outer pair, the door panels are good for driver, $20 plus
1970 cstblazer, $80 plus ship for skid plate and rear skid plate crossmember
tcb-1, Doug, I'll look at the windows, they are tinted. The wings are not chrome they are the black frames. $25 for the pair. Yes that is a Cruise module, I have not looked real good, I think that is the only part there for a cruise setup, I'll do some checking on it
Scott Johnson, $100 plus shipping for the adapter
My72BB, the inside of the filler has been cut for some reason, the outer cover looks good except for a couple extra screw holes, I'll get a pic when it quits raining here $30 plus ship
Forever71, driver quality on all those items $20 for panels $10 for arm rests plus ship
Chipflyer, Jeff, thats what Susie said
72 chevy suburban, no hooks on it, someone stole them off it already (NOT ME but I know who)
Thanks let me know guys, Randy

[teeitup]

71blksuper4x4, Trevor, the tailgate piece has some damage, I'll get some pcis of it $20 for it, $30 for the metal rad hose, no inner bumper brackets, $ $30 for driver seat brackets
badpeanut, Wes, $40 for hitch, I'll get some pics, gas lines are bad, if it has the oil dipstick and its good $30 for it, I'll check to see if its there
Hotfun, Mark, pass side has heat riser $50 for pair, stove heat shield is rusted out. $30 for dipstick, your 2nd on it
Cap n Hook, I'll check conditoin of those, I think the drivers side male is a different color
Sammy, it looks good from what I can see, i'll get it off and check it better, if good $40 plus ship
Hart-Rod, Rob, I have a local guy who called me last week on the whole setup so it may be sold, sorry. I'll find out Mon
Lugnut64052, Your 2nd on it, $30 plus ship
HuggerCST, its real bad sorry
Critter, its yours if you want it? Let me know
Thanks Randy

[Ogre72]

I'll take the Alt brackets, if still available, shipping to 21532. Looking for the brackets/bolts that hold the top to the front top of windshield, behind visors. Also need the hardware to latch the hatch on the hardtop, my spring is broken on one side.
Thanks,
Dave

[6T8]

Sent pm on brake lines....Rick

[tcb-1]

Randy,
Please check the windows for any scratches or chips. I found a set of wings, so I won't need those.
Get back with me when you can...

[Critter]

PM sent

[tcb-1]

Randy, I was just commenting on the cruise control module. If Chipflyer or luv2 want it, let it go to the next inlne.

still interested in the windows. I'll wait 'til you check them out.

[teeitup]

OK Doug, no problem on the CC. I'll get the windows cleaned and check condition, as you know it was not very nice around our area today Thanks Randy

[72swbcamo]

If 1970CSTblazer doesn't take the skid plate I'm interested but all I need is the skid plate. I don't need the rear crossmember.

[My72BB]

What do you suppose happenend to the inside of the filler??? How much for all of the gas neck filler + sheet metal inside cover shipped to 17320?

Thanks, Alan

[teeitup]

72swbcamo, you'd be 4th in line for it. To be mounted correctly you'd need the rear crossmember, most trucks/blazer do not have the rear crossmember. I'll let you know what they decide, Thanks Randy

[teeitup]

My72Bb, Alan, I don't know what the previous owners would of did to it, its kind of strange. I'll get it all off and get a quote for you, hopefully this week. Thanks Randy

[badpeanut]

I'll take the dipstick.

I'll take the rear frame horns, but let me verify where to cut (I'm thinking from the rear spring hanger rivets back to the bumper which would be a little over 13" of length--I'd like a little of the spring hanger rivet holes left to use as a point of reference).

I will go out tonight and see how the hitch will work for me. Does it mount to the sides of the frame rails just behind the rear leaf spring hangers?

[72 Cheyenne K20]

Hey Randy, interested in the frame brace for the P/S pump. Does it have one? How much shipped to 55060.

Thanks, Scott

[teeitup]

Scott, I may have the whole running gear and frame sold, I'll know this weekend. If this guy doesn't buy it all, I'll get ahold of you. Thanks Randy

[glimmertwin01]

fan shroud??

[teeitup]

Dan, I have 2 guys ahead of you on it, I'll let you know what they say. Thanks Randy

[stsalvage]

just as a question are you selling the alternator bracket the top skinny one that the alt adjusts on i have pay pal contact me tallguylookinng@yahoo.com i just need the upper bracket