Lowered 73-87 Short Beds - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ohchiiit · 02-28-2015, 04:05 PM

Quote:

Originally Posted by muthstryker

Like suggested above, I would go right to a 4/6. Most people will want to go lower even from there. I did a 3/3 on my friends truck we rolled it out of the garage and not even within 10 mins of seeing it he already wants it lower.

Mines a 6/8..

What size tires are you running?

Gabriel661 · 09-12-2015, 03:22 AM

Quote:

Originally Posted by joe1982

4.5ish closer to 5/6

Did u have to. C notch it

SDC10 · 09-12-2015, 01:21 PM

My 74

Gabriel661 · 09-12-2015, 01:55 PM

Quote:

Originally Posted by criscodisco

This is a lmc 4/6 with about a full coil cut off both fronts, and 2 more inches of block out back. The truck is my daily, and besides the occasional lower scrape, i have no complaints.

Did you have to c notch the back

SDC10 · 09-12-2015, 02:03 PM

Yes

Gabriel661 · 09-12-2015, 02:07 PM

Quote:

Originally Posted by SDC10

Yes

What about if i go with a 3/5 do you have to notch it

**nlped** · 09-12-2015, 03:27 PM

You can go with 4.5"/6" without a notch. Any lower in the rear and a notch becomes necessary...

**ms2335** · 09-13-2015, 05:45 AM

4/6 2.5 drop spindles/springs front and flip kit rear

Name: image.jpg
Views: 6878
Size: 62.0 KB

Speeding Dakota · 09-13-2015, 04:50 PM

Here mine 4/5 drop - 2.5" CPP drop spindles & 1 coil cut off, rear flip (using Specialtyretail 5" drop brackets) and using KYB Nitro Shocks. Running 255/45/18 & 275/40/18 tires.
Name: 14 - New Tires and paint 5.jpg
Views: 6934
Size: 61.8 KB

Name: 14 - New Tires and paint 5.jpg
Views: 6934
Size: 61.8 KB

Name: 14 - New Tires and paint 9.jpg
Views: 6949
Size: 60.8 KB

Name: 14 - New Tires and paint 14.jpg
Views: 7158
Size: 51.6 KB

ddr11 · 09-16-2015, 01:50 PM

1987 Step Side W/5-7

bbbc10 · 09-16-2015, 04:59 PM

I had 6" drop in back an notched it....but I didn't have too....if your not going to haul anything or tow anything you don't have to with 6" drop.

UKNOWME · 09-16-2015, 05:02 PM

Quote:

Originally Posted by ddr11

1987 Step Side W/5-7

Man, I love that truck!

dohc91gli · 09-18-2015, 04:39 AM

I have a flip in the rear, and the PO heated the coils in the front, any bump and its on the bump stops. I have a few questions.

how many inches does a flip get you? How are you guys achieving your 6"-7" drops in the rear.

and whats the best setup to get the 4.5" in the front?

I'm leaning towards a 4.5"/6" or a 5"/7"

muthstryker · 09-18-2015, 10:25 AM

Quote:

Originally Posted by muthstryker

Like suggested above, I would go right to a 4/6. Most people will want to go lower even from there. I did a 3/3 on my friends truck we rolled it out of the garage and not even within 10 mins of seeing it he already wants it lower.

Mines a 6/8..

Man I miss this truck!! I check craigslist everyday hoping the new owner has posted it so i can get the thing back from him!

For future reference for the guys that are wondering, the tire sizes at the time were 245/35/20 front and 295/35/20 rear. I regretted at the time not going with a 245/40/20 in the front and would advise anyone looking for a similar combo to go bigger than a 245/35 up front on these trucks.

UKNOWME · 09-18-2015, 11:27 AM

Quote:

Originally Posted by dohc91gli

I have a flip in the rear, and the PO heated the coils in the front, any bump and its on the bump stops. I have a few questions.

how many inches does a flip get you? How are you guys achieving your 6"-7" drops in the rear.

and whats the best setup to get the 4.5" in the front?

I'm leaning towards a 4.5"/6" or a 5"/7"

I did a flip kit and shackles to get 7. I would recommend spindles and springs for the front.

TRAU 82 · 05-19-2016, 11:56 PM

Quote:

Originally Posted by Jonboy

My '74 is about 6/8. I can't take the credit for the drop, as Scoti did it when it was his DD. I drive it to work a couple times a week, and it rides really well, though.

I really dig your truck Jonboy..would you or Scoti be able to recall what spindle/spring combo and rear setup you used and the staggered tire sizes in front and rear? That thing sits perfect..exactly the stance I'm going for with my '82..

Goose1985 · 02-25-2019, 04:02 PM

What size tires are you running?

gmcmoose · 02-25-2019, 07:00 PM

Quote:

Originally Posted by Goose1985

What size tires are you running?

The Front Tires Are P255/60/15 and The Rear Are P285/70/15 !!

SCOTI · 02-27-2019, 03:51 PM

Quote:

Originally Posted by TRAU 82

I really dig your truck Jonboy..would you or Scoti be able to recall what spindle/spring combo and rear setup you used and the staggered tire sizes in front and rear? That thing sits perfect..exactly the stance I'm going for with my '82..

This is an oldy but I noticed a question asked & not answered. JIC someone was/is curious, when that pic was taken, that 74 had dropped spindles, 1-coil removed from the factory V8/sbc coils, & relocated upper shock mounts. The rear was a flip kit on the 8-leaf HD spring pack, Western Chassis c-notches, drop shackles, & relocated lower shock mounts w/2" shorter shocks. It also had a driveway fabbed AOL set-up w/Schrader valves.

Fronts were 15x6.5" Van Ralleys & 215/70-15 BFG's.
Rears were 15x8" Truck Ralleys & 255/70-15 BFG's.

Jonboy indicated it "rides really well". It did.... on smooth pavement. Not so much on the much more common asphalt patched roads. It definitely needed more suspension travel clearance as it bottomed out front & rear.

zach_carver · 02-28-2019, 11:30 PM

Mine is flipped rear, and like a 4" front drop. 20s with 255/40R20 and 295/40R20s now. I think my springs are weak because the rear flip really lowered it a lot. Lol

**mongocanfly** · 02-28-2019, 11:35 PM

Truck looks great Zach....

sweetk30 · 02-28-2019, 11:48 PM

my 80's 2wd c-10 5.3LS / 4l60-e / 3.73 rear / 2.5" drop front and rear . pics show it on half worn 31" tires . goin 29" tires when done on stock 15x8 stock rally wheels .

used a stock no tow hook hole 4x4 air dam to make it look lower on the front . we got pot holes up here so didnt want to low .

skyphix · 03-01-2019, 12:25 PM

Quote:

Originally Posted by sweetk30

my 80's 2wd c-10 5.3LS / 4l60-e / 3.73 rear / 2.5" drop front and rear . pics show it on half worn 31" tires . goin 29" tires when done on stock 15x8 stock rally wheels .

used a stock no tow hook hole 4x4 air dam to make it look lower on the front . we got pot holes up here so didnt want to low .

I like the stance and the AT's on a lowered truck at that height. Looks tough, nice stance too.

I feel your pain with the potholes, pretty sure you can disappear in them here in Maine. I threw caution to the wind and am going lower with mine in the front than it already is, and its pretty low as is... after some of the giant ridges I ran over in NJ, not much could be worse at least in the spring/summer/fall when I actually drive my truck. I never bottemed out anywhere, even on some really, really nasty country roads where I've actually accidentally lifted the front wheels of my 4runner driving on, except in NJ on my drive home.

novajess1972 · 03-22-2020, 08:43 PM

My 85 with Belltech 4/6 with 3/4 of the front coils cut.

Keith Seymore · 03-23-2020, 09:55 AM

4/6, cut coils in front relocated spring hangers in back.

K

09-12-2015, 01:21 PM	#53
SDC10 Registered User Join Date: Feb 2012 Location: SoCal Posts: 29	Re: Lowered 73-87 Short Beds My 74 Attached Images

09-12-2015, 02:03 PM	#55
SDC10 Registered User Join Date: Feb 2012 Location: SoCal Posts: 29	Re: Lowered 73-87 Short Beds Yes

09-12-2015, 03:27 PM	#57
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Lowered 73-87 Short Beds You can go with 4.5"/6" without a notch. Any lower in the rear and a notch becomes necessary... __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-13-2015, 05:45 AM	#58
ms2335 Senior Member Join Date: Jan 2009 Location: glenmora. la Posts: 290	Re: Lowered 73-87 Short Beds 4/6 2.5 drop spindles/springs front and flip kit rear __________________ 65 Chevy C10 Short Fleet BBW 6.0L/4l80E 68 Chevy C10 SWB 6.0L/4L80E 84 Chevy C10 SWB 5.3/4l60E QA1 Suspension

09-13-2015, 04:50 PM	#59
Speeding Dakota Registered User Join Date: Oct 2013 Location: Shrewsbury, PA Posts: 325	Re: Lowered 73-87 Short Beds Here mine 4/5 drop - 2.5" CPP drop spindles & 1 coil cut off, rear flip (using Specialtyretail 5" drop brackets) and using KYB Nitro Shocks. Running 255/45/18 & 275/40/18 tires.

09-16-2015, 01:50 PM	#60
ddr11 Registered User Join Date: Nov 2013 Location: sumter sc Posts: 79	Re: Lowered 73-87 Short Beds 1987 Step Side W/5-7 Attached Images

09-16-2015, 04:59 PM	#61
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: Lowered 73-87 Short Beds I had 6" drop in back an notched it....but I didn't have too....if your not going to haul anything or tow anything you don't have to with 6" drop.

09-18-2015, 04:39 AM	#63
dohc91gli Registered User Join Date: Dec 2010 Location: McMinnville, Oregon Posts: 2	Re: Lowered 73-87 Short Beds I have a flip in the rear, and the PO heated the coils in the front, any bump and its on the bump stops. I have a few questions. how many inches does a flip get you? How are you guys achieving your 6"-7" drops in the rear. and whats the best setup to get the 4.5" in the front? I'm leaning towards a 4.5"/6" or a 5"/7"

02-25-2019, 04:02 PM	#67
Goose1985 Registered User Join Date: Dec 2018 Location: Bismarck, ND Posts: 7	Re: Lowered 73-87 Short Beds What size tires are you running?

02-28-2019, 11:30 PM	#70
zach_carver Registered User Join Date: Aug 2014 Location: Blue Ridge,GA Posts: 508	Re: Lowered 73-87 Short Beds Mine is flipped rear, and like a 4" front drop. 20s with 255/40R20 and 295/40R20s now. I think my springs are weak because the rear flip really lowered it a lot. Lol Attached Images __________________ 1965 C10 LS2/4l70, WHITE, 5/7 DROP LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283 1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E 1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE

02-28-2019, 11:35 PM	#71
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,662	Re: Lowered 73-87 Short Beds Truck looks great Zach.... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-28-2019, 11:48 PM	#72
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: Lowered 73-87 Short Beds my 80's 2wd c-10 5.3LS / 4l60-e / 3.73 rear / 2.5" drop front and rear . pics show it on half worn 31" tires . goin 29" tires when done on stock 15x8 stock rally wheels . used a stock no tow hook hole 4x4 air dam to make it look lower on the front . we got pot holes up here so didnt want to low . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

03-22-2020, 08:43 PM	#74
novajess1972 Registered User Join Date: Sep 2006 Location: Houston, Texas Posts: 190	Re: Lowered 73-87 Short Beds My 85 with Belltech 4/6 with 3/4 of the front coils cut. Attached Images __________________ 1985 SWB Silverado 1/2 Ton 1972 Chevy SWB 1/2 Ton (sold) 1972 Chevy Chevelle SS (sold) 1971 Chevy Nova (sold) 1967 Chevy El Camino (sold) 2001 Mustang Bullitt (sold) 2019 Toyota Tundra Crewmax (daily)

03-23-2020, 09:55 AM	#75
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,213	Re: Lowered 73-87 Short Beds 4/6, cut coils in front relocated spring hangers in back. K Attached Images __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.