OR 1972 C10 Parting - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Chevy Fan Always** · 05-16-2015, 10:47 AM

Quote:

Originally Posted by DLTruck1973

Manifold will be $125.00 plus $40.00 to ship, so total is $165.00.

Here are some photos with the part numbers.

Thank you,
Thomas

Sorry to keep bothering you, do you know if the heat shield ( i found on) will work with those injector bumps on the manifold? I want to wait just a little longer till I find out for sure. And do you know what shipping on the sway bar would be to 44805?

Mike Wilson

DLTruck1973 · 05-16-2015, 01:47 PM

Quote:

Originally Posted by Chevy Fan Always

Sorry to keep bothering you, do you know if the heat shield ( i found on) will work with those injector bumps on the manifold? I want to wait just a little longer till I find out for sure. And do you know what shipping on the sway bar would be to 44805?

Mike Wilson

Hi Mike,

http://67-72chevytrucks.com/vboard/s...d.php?t=670605

This heat stove is the one that goes with the manifolds I am selling. Both are correct for a 72 C10 from the factory. The heat stove in the link is sold pending payment but should give you a reference to what is correct. I have seen these heat stoves with holes for the injector tubes before but not sure if you need one with holes to run the manifolds. Also when looking for a heat stove, remember that 2wd and 4wd heat stoves are different.

Hope this helps,
Thomas

46stude · 05-14-2015, 10:47 PM

Quote:

RH and LH Upper door trim, nice...$ 20.00 each

park light lenses, one has a chip on the edge and one has a rub mark...$10.00 each.

Need the LH (drivers) upper door trim & both parking light lenses. Shipping to 78382?

DLTruck1973 · 05-15-2015, 05:17 PM

Quote:

Originally Posted by 46stude

Need the LH (drivers) upper door trim & both parking light lenses. Shipping to 78382?

$40 for the parts and $33.00 for shipping so $73.00 total.

I pack the trim very well to prevent damage in shipping. It will be two packages.

Let me know and I will send PM with payment information.

Thank you,
Thomas

46stude · 05-15-2015, 10:15 PM

Quote:

Originally Posted by DLTruck1973

$40 for the parts and $33.00 for shipping so $73.00 total.

I pack the trim very well to prevent damage in shipping. It will be two packages.

Let me know and I will send PM with payment information.

Thank you,
Thomas

Good used is better than cheap repro, right? lol

I'll take the parts. Send me a PM w/ info for mailing a Postal MO.

Nick92087 · 05-15-2015, 11:10 PM

Do you still have all the parts for the IFS?

DLTruck1973 · 05-16-2015, 01:51 AM

Quote:

Originally Posted by Nick92087

Do you still have all the parts for the IFS?

"
Complete disc brake conversion, includes, cross member, coils, upper and lower control arms, spindles, rotors with bearings, dust shields, calipers, idler arm, inner and outer tie rods. Center link not in the photo but will make one available with the sale...$ 250.00"

Yes this is still available.

Thank you,
Thomas

DLTruck1973 · 05-16-2015, 01:46 AM

Quote:

Originally Posted by 46stude

Good used is better than cheap repro, right? lol

I'll take the parts. Send me a PM w/ info for mailing a Postal MO.

PM on the way.

Thank you,
Thomas

46stude · 06-01-2015, 10:19 PM

Quote:

Originally Posted by DLTruck1973

I pack the trim very well to prevent damage in shipping.

Yes, yes you did!

My drivers side upper door trim & parking light lenses arrived today, exactly as described. Thank you.

70chevytruck · 06-02-2015, 12:57 PM

Water pump pulley.....have one? Double groove....shortly.

DLTruck1973 · 06-02-2015, 01:20 PM

Quote:

Originally Posted by 70chevytruck

Water pump pulley.....have one? Double groove....shortly.

Yes I do have one. This is 5 13/16 dia. The part number is 3995646AH

$25.00 plus shipping. I also have the larger dia version of this pulley which is 7 1/8 inch.

Let me know.

Thank you,
Thomas

kingstrider · 05-15-2015, 06:05 AM

Can I get photos of the wiper arms? I also sent you a PM yesterday afternoon regarding parking lenses. If you have better ones please let me know price and condition.

DLTruck1973 · 05-15-2015, 12:28 PM

Quote:

Originally Posted by kingstrider

Can I get photos of the wiper arms? I also sent you a PM yesterday afternoon regarding parking lenses. If you have better ones please let me know price and condition.

Here are photos of the wiper arms and the best set of lenses I have currently. These lenses are $15.00 each and are nice for a driver, no cracks and decent color.

Let me know and I will get you a shipping quote with your zip code.

Thank you,
Thomas

kingstrider · 05-15-2015, 04:15 PM

Quote:

Originally Posted by DLTruck1973

Here are photos of the wiper arms and the best set of lenses I have currently. These lenses are $15.00 each and are nice for a driver, no cracks and decent color.

Let me know and I will get you a shipping quote with your zip code.

Thank you,
Thomas

I'll pass on the wiper arms but I will take those other lenses for sure! What do the housings look like? Shipping will be to 20871. Thank you!

**tll74** · 05-15-2015, 04:18 PM

Chevy's rule

**TBONE1964** · 05-15-2015, 04:30 PM

Quote:

Originally Posted by tll74

Chevy's rule

I second that

DLTruck1973 · 05-15-2015, 04:44 PM

Quote:

Originally Posted by kingstrider

I'll pass on the wiper arms but I will take those other lenses for sure! What do the housings look like? Shipping will be to 20871. Thank you!

I can set you up with a nice decent set of usable housings with no stripped out holes and good pig tails at $12.50 each. You want the good $15.00 each lenses, correct? I can ship all for $13.00 so your total will be $68.00.

Let me know and I can PM you payment information.

Thank you,
Thomas

kingstrider · 05-16-2015, 02:26 PM

Quote:

Originally Posted by DLTruck1973

I can set you up with a nice decent set of usable housings with no stripped out holes and good pig tails at $12.50 each. You want the good $15.00 each lenses, correct? I can ship all for $13.00 so your total will be $68.00.

Let me know and I can PM you payment information.

Thank you,
Thomas

Thanks Thomas, that works and yes I want the good lenses. Send me a PM and we'll go from there.
John

Mr Handy · 05-15-2015, 07:19 AM

Sorry to keep adding, but can you also get me a quote if I added the driveline and a trans corssmember. I'm guessing those will kill me on shipping.

DLTruck1973 · 05-15-2015, 11:41 AM

Quote:

Originally Posted by Mr Handy

Sorry to keep adding, but can you also get me a quote if I added the driveline and a trans corssmember. I'm guessing those will kill me on shipping.

This is going to take me a little time. It maybe Monday before I can make the time to figure a shipping quote. It would help me if you made me a list of everything all in one post.

It may be cheaper to freight ship everything on a pallet due to the size and weight of all of it together.

Let me know,
Thomas

Mr Handy · 05-15-2015, 02:12 PM

Quote:

Originally Posted by DLTruck1973

This is going to take me a little time. It maybe Monday before I can make the time to figure a shipping quote. It would help me if you made me a list of everything all in one post.

It may be cheaper to freight ship everything on a pallet due to the size and weight of all of it together.

Let me know,
Thomas

No problem, I was thinking I should make a list as well. Will put it together when I get home from work.

I was thinking with the big stuff freight would be better as well. I can have it sent here to my work address.

DLTruck1973 · 05-15-2015, 02:16 PM

Quote:

Originally Posted by Mr Handy

No problem, I was thinking I should make a list as well. Will put it together when I get home from work.

I was thinking with the big stuff freight would be better as well. I can have it sent here to my work address.

Sounds good. That will make sure we are on the same page. Also, get me a zip code for the business/work address.

Thank you,
Thomas

**Chevy Fan Always** · 05-15-2015, 10:40 AM

Do you have a price for the sway bar? I didnt see it.

Mike

DLTruck1973 · 05-15-2015, 11:37 AM

Quote:

Originally Posted by Chevy Fan Always

Do you have a price for the sway bar? I didnt see it.

Mike

Hi Mike,

Complete sway bare with frame brackets is $50.00 plus shipping.

Let me know.

Thank you,
Thomas

**Chevy Fan Always** · 05-16-2015, 02:55 PM

Quote:

Originally Posted by DLTruck1973

Hi Mike,

Complete sway bare with frame brackets is $50.00 plus shipping.

Let me know.

Thank you,
Thomas

I will take the manifolds. if I take the sway bar what would the total be for sipping with it added?

44805
Mike

05-15-2015, 11:10 PM	#6
Nick92087 Registered User Join Date: May 2015 Location: Yelm, WA Posts: 1	Re: 1972 C10 Parting Do you still have all the parts for the IFS?

06-02-2015, 12:57 PM	#10
70chevytruck Registered User Join Date: Jun 2007 Location: Buda, Texas Posts: 865	Re: 1972 C10 Parting Water pump pulley.....have one? Double groove....shortly. __________________ 70chevytruck

05-15-2015, 06:05 AM	#12
kingstrider Registered User Join Date: Jan 2015 Location: Uncle Sam knows Posts: 286	Re: 1972 C10 Parting Can I get photos of the wiper arms? I also sent you a PM yesterday afternoon regarding parking lenses. If you have better ones please let me know price and condition.

05-15-2015, 04:18 PM	#15
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 1972 C10 Parting Chevy's rule __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

05-15-2015, 07:19 AM	#19
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	Re: 1972 C10 Parting Sorry to keep adding, but can you also get me a quote if I added the driveline and a trans corssmember. I'm guessing those will kill me on shipping.

05-15-2015, 10:40 AM	#23
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 1972 C10 Parting Do you have a price for the sway bar? I didnt see it. Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.