parting a 68 chevy now - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BIG ORANGE** · 08-18-2009, 08:20 PM

Thanks Randy, sounds like a min. of $60.00 at most. I'll tell Gonzo and see about geting his money up front. Dont want to get stuck again from trying to help a local guy out!
Donnie

HOTFUN · 08-18-2009, 09:41 PM

Randy, I'll take the hood and pass on the heater control. Should just buy the complete box but looks like the drivers side may have some issues and you have the tailgate and hardware off now. Let me know what that passenger side bedside looks like and a price and I'll settle up with you. I'll get you paid right away but I hope you can store it for a little bit till I can make it over? Thanks, Mark

ERASER5 · 08-18-2009, 09:46 PM

How much for the 67-68 specific top bar that the hood closes on?

**special-K** · 08-18-2009, 09:48 PM

Thanks Randy.Let me know if you come up with a nice matched set.

teeitup · 08-18-2009, 10:29 PM

Nate, I'll get some pics of mirror for you, Sorry not going to make the Nats. $50 for the gate, it has some issues
Mark, I'll check out the bed better after work. I can store stuff for you without any problem
Erasers, you must be talking about 67-68 GMC top bars, 67-68 chevys do not have a top bar
Tim, sure will. Hopefully out of the seven that I'm supposed to have bought one of them will have them
Thanks Randy

ERASER5 · 08-19-2009, 02:37 AM

Opps. My bad.

teeitup · 08-19-2009, 07:55 PM

dash piece $20 plus shipping
man box $20 plus shipping
hood hinges $15 plus ship
brake pedal $15 plus ship
Auto column, its long $30 plus ship

teeitup · 08-19-2009, 07:56 PM

driver side inner, small rust $20 no ship
great rad support $80
decent pass door, rust in one corner $30
seat $30
6 cyl motor stands $30 shipped

teeitup · 08-19-2009, 07:58 PM

power glide shift linkage $25 plus ship
pics of mirror for Nate, some pitting on chrome

teeitup · 08-20-2009, 06:33 AM

STP67-72, Steve, cable is yours I'll pm you
Mark, I'll pm you
Thanks so much, Randy

teeitup · 08-20-2009, 06:34 AM

Grill is still for sale
Thanks Randy

Don Smith · 08-22-2009, 08:40 PM

How much for the steering wheel?

**STP67-72** · 08-19-2009, 06:45 AM

How much for the choke cable.

**CPNE** · 08-19-2009, 09:50 AM

Randy, I'll take the door panels. Can you hold them until September? I'll be away until then.

skeeterbug · 09-03-2009, 06:32 PM

i need that rearview if you still have it, just let me know how much please. also on the frame in between the rails i need the middle crossmember if you want to part w/ it. the PO of my truck cut mine up badly to run the exhaust through. area code 37184, TN

olblue60@aol.com · 08-19-2009, 07:33 AM

Hi Randy
I'm really just needing the 67 cluster face if that helps. Same price is OK!

John

HOTFUN · 08-19-2009, 09:59 PM

Randy I'll pass on the bed and pay you for the hood if you can put it to the side somewhere for a while. PM me with payment info and I'll get you paid. I'll have to make a road trip with the pickup one of these days and pick the hood up then. Thanks, Mark

Bubba4spd · 08-20-2009, 06:20 PM

I sorta liked how the old truck looked all in one piece. Guess the older I get the more sympathetic I am to old broken down things.

olblue60@aol.com · 08-21-2009, 06:13 AM

Paypal sent !

BigCarl · 08-21-2009, 07:44 AM

I am looking for the rear wiring harness... goes from the frame to the tail lights. Got it?

72BlckButy · 08-21-2009, 07:57 AM

Randy do you know if you're able to replace the glass in a mirror? My metal surround is in good condition, but the mirror itself has began to lose the "mirror" around the edges.

Is the mirror "perfect/excellent driver"?

**ScottH** · 08-21-2009, 10:02 AM

Randy, if the auto column is still available can u give me a shipping price to 08753?

Thanks.

Scott

**Hart_Rod** · 08-21-2009, 10:16 AM

Randy - just saw this - paypal info for the radio knobs.

R/

teeitup · 08-21-2009, 12:25 PM

Bubba4spd, just think of it as a donor to help keep other going
Olblue, John, It will go out Mon fed ex
Bigcarl, sorry no good ones right now
72blckbuty, Nate, not sure on replacing mirror, I think this mirror is in good conditoin, I'll check it again
scottH, I'll try to find a box long enough to get a quote
hart_Rod, Rob, I'll pm you
Thanks Randy

teeitup · 08-21-2009, 03:41 PM

Pm'd you Rob and Scott
Nate, mirror glass is real good, back of mirror needs sanded and painted. Mirror arm has some pitting
Thanks Randy

08-18-2009, 08:20 PM	#1
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Re: parting a 68 chevy now Thanks Randy, sounds like a min. of $60.00 at most. I'll tell Gonzo and see about geting his money up front. Dont want to get stuck again from trying to help a local guy out! Donnie __________________ Things happen for a reason!

08-18-2009, 09:41 PM	#2
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: parting a 68 chevy now Randy, I'll take the hood and pass on the heater control. Should just buy the complete box but looks like the drivers side may have some issues and you have the tailgate and hardware off now. Let me know what that passenger side bedside looks like and a price and I'll settle up with you. I'll get you paid right away but I hope you can store it for a little bit till I can make it over? Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-18-2009, 09:46 PM	#3
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: parting a 68 chevy now How much for the 67-68 specific top bar that the hood closes on? __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

08-18-2009, 09:48 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: parting a 68 chevy now Thanks Randy.Let me know if you come up with a nice matched set. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-18-2009, 10:29 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now Nate, I'll get some pics of mirror for you, Sorry not going to make the Nats. $50 for the gate, it has some issues Mark, I'll check out the bed better after work. I can store stuff for you without any problem Erasers, you must be talking about 67-68 GMC top bars, 67-68 chevys do not have a top bar Tim, sure will. Hopefully out of the seven that I'm supposed to have bought one of them will have them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-19-2009, 02:37 AM	#6
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: parting a 68 chevy now Opps. My bad. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

08-19-2009, 07:55 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now dash piece $20 plus shipping man box $20 plus shipping hood hinges $15 plus ship brake pedal $15 plus ship Auto column, its long $30 plus ship Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:04 PM.

08-19-2009, 07:56 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now driver side inner, small rust $20 no ship great rad support $80 decent pass door, rust in one corner $30 seat $30 6 cyl motor stands $30 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:03 PM.

08-19-2009, 07:58 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now power glide shift linkage $25 plus ship pics of mirror for Nate, some pitting on chrome Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:05 PM.

08-20-2009, 06:33 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now STP67-72, Steve, cable is yours I'll pm you Mark, I'll pm you Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-20-2009, 06:34 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now Grill is still for sale Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-22-2009, 08:40 PM	#12
Don Smith Registered User Join Date: Jul 2000 Location: Hampton, Ga, USA Posts: 217	Re: parting a 68 chevy now How much for the steering wheel? __________________ 68 Short Stepside, 350, quadrajet, 700r4, 3:73 posi, power front discs, HEI, Factory Air, Tilt, Tach, accelerator cable instead of rod, sway bar. 96 Impala SS 97 Monte Carlo

08-19-2009, 06:45 AM	#13
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,664	Re: parting a 68 chevy now How much for the choke cable. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-19-2009, 09:50 AM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: parting a 68 chevy now Randy, I'll take the door panels. Can you hold them until September? I'll be away until then. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

09-03-2009, 06:32 PM	#15
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: parting a 68 chevy now i need that rearview if you still have it, just let me know how much please. also on the frame in between the rails i need the middle crossmember if you want to part w/ it. the PO of my truck cut mine up badly to run the exhaust through. area code 37184, TN __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage



Register or Log In To remove these advertisements.

08-19-2009, 07:33 AM	#16
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: parting a 68 chevy now Hi Randy I'm really just needing the 67 cluster face if that helps. Same price is OK! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 08-19-2009 at 08:34 AM.

08-19-2009, 09:59 PM	#17
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: parting a 68 chevy now Randy I'll pass on the bed and pay you for the hood if you can put it to the side somewhere for a while. PM me with payment info and I'll get you paid. I'll have to make a road trip with the pickup one of these days and pick the hood up then. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-20-2009, 06:20 PM	#18
Bubba4spd Registered User Join Date: Sep 2005 Location: S. Georgia Posts: 254	Re: parting a 68 chevy now I sorta liked how the old truck looked all in one piece. Guess the older I get the more sympathetic I am to old broken down things.

08-21-2009, 06:13 AM	#19
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: parting a 68 chevy now Paypal sent ! __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-21-2009, 07:44 AM	#20
BigCarl Registered User Join Date: Sep 2007 Location: Thunder Bay, Ontario Posts: 170	Re: parting a 68 chevy now I am looking for the rear wiring harness... goes from the frame to the tail lights. Got it?

08-21-2009, 07:57 AM	#21
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: parting a 68 chevy now Randy do you know if you're able to replace the glass in a mirror? My metal surround is in good condition, but the mirror itself has began to lose the "mirror" around the edges. Is the mirror "perfect/excellent driver"? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-21-2009, 10:02 AM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: parting a 68 chevy now Randy, if the auto column is still available can u give me a shipping price to 08753? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-21-2009, 10:16 AM	#23
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: parting a 68 chevy now Randy - just saw this - paypal info for the radio knobs. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-21-2009, 12:25 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now Bubba4spd, just think of it as a donor to help keep other going Olblue, John, It will go out Mon fed ex Bigcarl, sorry no good ones right now 72blckbuty, Nate, not sure on replacing mirror, I think this mirror is in good conditoin, I'll check it again scottH, I'll try to find a box long enough to get a quote hart_Rod, Rob, I'll pm you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-21-2009, 03:41 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 68 chevy now Pm'd you Rob and Scott Nate, mirror glass is real good, back of mirror needs sanded and painted. Mirror arm has some pitting Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.