The Ultimate Craigslist find thread

[jumpsoffrock]

72 2 ton above actual link:
'72 2 ton chev. 350V8 all steel bed with dovetail 8'x18 1/2' $1995 might part out
http://oklahomacity.craigslist.org/cto/4912745024.html

[C10 - C90 Bill]

Glad to see you post that. When I clicked onto it earlier, it popped up as a Toyota, lol.

Truck looks like it's way too good for parts.

...not crazy about the Trans though.

[vanaman]

whoops

[vanaman]

1964 w-500

http://denver.craigslist.org/cto/4869903447.html

[83GMCK2500]

GMC Race Hauler Sleeper Cab - $8500 (Pacific)

GMC Race Hauler with Sleeper Cab. Detroit Diesel, 13speed trans, Air brakes, all drive train was rebuilt and truck was used as back up, so no time on fresh drive train! {Engine, Trans, Brakes,} Power winch in box, Truck was used to tow race boats. This is not designed to put a car in the back unless it is a small race car! Box is 16 x 8. This truck is a shop for engines and is a support Vehicle! This is a lot of tow vehicle for $8500.00. This is a CDL truck unless you put a bath room in box!! Leave phone number if interested.

[83GMCK2500]

1949 GMC WRECKER TOW TRUCK - $2900 (TACOMA)

Thank you for looking at my old 49 GMC tow truck. This truck is in great shape. All the body work has been done other then the drivers door. The front end has been rebuilt. It runs great although it hasn't been started in 2 years. All the wrecker parts are include. This truck would make one cool rod, or bring it back to original. It only has surface rust. I'm asking 2900.00

[83GMCK2500]

1950's GMC TRUCK DOORS - $200

1950's GMC TRUCK DOORS $200
Body, Frame, Rear end, etc., for sale as well.

[83GMCK2500]

1966 GMC 10 ton Tanker - $6500 (Oldtown Id)

Hello there, i have a 1966 GMC 10 ton Tanker for sale. don't let the age fool ya. this is a good old truck and runs like a top. tires are great, Detroit, 10 speed, tag axle. all works was used up until last fall. Honda pump motor. about 1/3 full of type 3 asphalt in it. $6500 takes it home.

[83GMCK2500]

GM 401 V6 MAGNUM TRUCK ENGINE - $600

Totally rebuilt GM 401 V6 Gas ENGINE out of 1967 GMC TRUCK
Out of Truck..., Ready to Go
Inspection appears to show as Magnum Performance Engine Components.
Sell $600

[83GMCK2500]

1967 GMC dump truck - $2000 (Cle Elum)

1967 GMC one and a half ton dump truck tire 80 percent 350 4speed clear title call for more details

[83GMCK2500]

1967 GMC flatbed With 427 wide block - $2000 (marysville)

1967 GMC 24,500 lb rated....... good tires....... 2 speed rear end ....New rebuilt 427 tall block built by
a pro. Runs Shifts and Stops Excellent. Excellent Wood or Car packer.
now special price of 2000 bucks.
Serious only lets not waste each others time
Thanks

[83GMCK2500]

GMC Diesel Dump truck - $5500 (Chehalis

1973 GMC Dump Truck with Detroit diesel, 180,000 original miles, Road rander transmission. New hydraulic pump was just installed.

$5500

[83GMCK2500]

1978 GMC Genral Scissor/Dump Truck - $16000 (oldtown Id)

Hello there, i have a very nice 1978 GMC General scissor/dump truck for sale. detroit/turbo,13 speed. hendricks suspension. tires like new. runs and drives perfect, in nice shape. heck of a truck. $1600.00 takes it home. ready to go to work.

[83GMCK2500]

Shop/service truck with crane - $3500 (Ocean Shores)

1978? GMC truck with service body and hydraulic hoist. Truck runs good and drives ok, by that I mean it steers and stops fine but probably should not be used for everyday long distance freeway type use. Service box doors lock as does cab. No rust that I know of, stored inside except when in use which was rarely. I bought it to consolidate tools for jobsite repair. Has onboard and for sale separately the following: nearly new Ingersoll Rand compressor w/13hp electric start Honda-$2250, Freshly rebuilt Lincoln 225 DC welder,old but good-$900, Victor 200 torch set w/owner bottles and 50 ft hoses $400, Now the hard part; excellent hand tools in complete sets all the way from 1/4" sockets to 2" and wrenches the same.1/4,3/8, 1/2,3/4 drive sets with many duplicates. A ton of assorted pliars,screwdrivers,hammers, etc. Negotiate some or all. Many other items. the truck is ready to go,have title but needs tabs. Will sell bare truck,$3500, or any combination. Let's talk about it&make a deal, I will be fair but not ridiculous, I do know what this stuff costs.

[83GMCK2500]

1987 GMC dump truck - $3500 (East side)

For sale 1987 GMC 7000 dump truck, additional hydraulic hook up in rear of truck to run hydraulic equipment. industrial (gasoline) V8 motor, unsure of the actual cubic inch since I'm not to familiar with industrial sizes . sticker Rated 22,000 lbs (no CDL) required. Truck door tag is actually rated at 23,900. flip nose front end
The bad: needs carb work, pops out of second at times
Still drivable as is.
The bed and hydraulic unit are worth just about what I'm asking. I want this truck to go to a good home where it'll get used
clean title
3,500
feel free to check similar trucks within state and out. this is a great price and firm on pricing

[83GMCK2500]

I am not related to nor do I know anyone of those people selling those trucks, I am just passing on what I have found locally. My personal favorites are the '67 ramp truck and the 5-Star in this batch...though the '73 MH is pretty sexy too.

[C10 - C90 Bill]

The Black 9500 sure is in nice shape for a '66. I like the '73 as well. Not a bad price on it. But the '67 GMC Ramp Truck sure seems like the best deal.

[68panelman]

Very nice list of trucks, thank you for taking the time to post these.

[jumpsoffrock]

Yes, thank you very much!

[83GMCK2500]

Y'all are most welcome. If I stumble across something that someone's been looking for or just appreciates in general (I know, most of us) I figure it's worth it. I like to see the diversity of Ma General's creations myself.

[C10 - C90 Bill]

By the way, the Red '73, now that I take a closer look, is a 7500 (1-Piece Windshield). It lists a Detroit, but doesn't say which one. Most likely a 6V-53.

Still wouldn't mind it in my driveway though, lol.

Bill

[pncmathias]

I saw this C60 not to far from me.
http://cnj.craigslist.org/cto/4950633212.html

[Swiftshifter68]

For the folks that're close to Indianapolis:

NICE "virtually rust-free 1967 C40 Cab + frontend included (looks very much like a sheetmetal "take off"

http://indianapolis.craigslist.org/cto/4958406517.html

(317) 989-9162

[Swiftshifter68]

^^^ Sweet! Good to know that post attempt worked, in case I run across any other ad's. Good luck!

(P.S. I'm in search of a '67-68 C40 or C50, preferably close(ish) to Northern California (Sacramento area)

Thank you in advance!

[Swiftshifter68]

This one's been up for a while, located in/near Bend, OR. If memory serves, it needed an engine? Looks like a great start to a car hauler and even has the little 'extra cab' Sleeper compartment:

http://bend.craigslist.org/pts/4946375765.html

(541) 325-6377