It's Home ! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dinos63 · 02-01-2008, 11:46 AM

Quote:

Originally Posted by red02chevy

Do you happen to have any photos of it?

not sure let me look, if not i am pulling off the bed soon and i can get some, if that works for ya,

Dinos63 · 02-01-2008, 11:50 AM

nice i will be in my 66 and i will bring some stickers,

**lolife99** · 02-01-2008, 12:18 PM

I'll take the sticker connected to the white '78!

gojo00 · 02-01-2008, 12:32 PM

Nice trucks! I'll take one 'em white stickers.

87nightmare · 02-01-2008, 03:04 PM

nice truck thats what its all about so how many $$$$ will it take me to bag my 87 it seems like every place i look $3000 seems to be the norm

Dinos63 · 02-03-2008, 01:48 PM

Quote:

Originally Posted by 87nightmare

nice truck thats what its all about so how many $$$$ will it take me to bag my 87 it seems like every place i look $3000 seems to be the norm

sounds close. it's spendy...

Dinos63 · 02-03-2008, 01:56 PM

Gots some parts and fittings this week,I haven't had much time after work this week to work on my 78,but did get some done on friday night.I mocked the air compressor and valves,hope to finsh and install it on saturday

los-lowrider · 02-05-2008, 07:08 PM

Dino, I love your trucks! Great work, definately one of the lowest I've ever seen.

andresco50 · 02-05-2008, 11:13 PM

I love your trucks awesome can you post more pics of the white one ?

Dinos63 · 02-06-2008, 12:34 PM

Quote:

Originally Posted by los-lowrider

Dino, I love your trucks! Great work, definately one of the lowest I've ever seen.

thanks bro, i hope to have all the air ride on this week end , and start driving it!

Dinos63 · 02-06-2008, 12:45 PM

Quote:

Originally Posted by andresco50

I love your trucks awesome can you post more pics of the white one ?

here is a few more, will have some new ones soon

1984 swb chevy · 02-06-2008, 12:46 PM

Nice truck.. It makes me miss my 78 chevy.

boxrodz · 02-06-2008, 03:16 PM

Quote:

Originally Posted by Dinos63

here is a few more, will have some new ones soon...

You must be getting amp'ed to get it rollin'...

I assume that last shot is at ride height. If so, would you take a yard stick to the front fenderlip and let me know how high it sits off the pavement? I assume you're running 3" drop spindles with the Dropmember. But, how tall are the tires your running?

Thank you.

jchav62 · 02-07-2008, 08:27 AM

Quote:

Originally Posted by Dinos63

here is a few more, will have some new ones soon

Looks killer! I hope one day the 73 (which I will be picking up from Vegas this weekend) looks half that cool when I'm done with it... BadA$$!!!!

Man I have a lot of work ahead of me...

Dinos63 · 02-07-2008, 08:42 AM

Quote:

Originally Posted by jchav62

Looks killer! I hope one day the 73 (which I will be picking up from Vegas this weekend) looks half that cool when I'm done with it... BadA$$!!!!

Man I have a lot of work ahead of me...

HEY STOP BY ON YOUR WAY BACK FROM VEGAS! I GOT THE STICKERS DONE AND WILL BE SENDING THEM OUT SOON,

Dinos63 · 02-07-2008, 08:57 AM

Quote:

Originally Posted by boxrodz

You must be getting amp'ed to get it rollin'...

I assume that last shot is at ride height. If so, would you take a yard stick to the front fenderlip and let me know how high it sits off the pavement? I assume you're running 3" drop spindles with the Dropmember. But, how tall are the tires your running?

Thank you.

BOXRODZ, YEAH I AM READY TO START DRIVING IT, ARE YOU INTRESTED IN HOW HIGH I CAN RAISE IT? OR JUST THE RIDE HEIGHT, I CAN MEASURE WHAT EVER YOU NEED, AND TIRE HEIGHT,BUT NOT TILL SATURDAY , COOL

jchav62 · 02-07-2008, 09:02 AM

Quote:

Originally Posted by Dinos63

HEY STOP BY ON YOUR WAY BACK FROM VEGAS! ,HEY I GOT THE STICKERS DONE AND WILL BE SENDING THEM OUT SOON,

Well I usually take US 93 from Vegas to Kingman, then I-40 east all the way to NM, not through Phoenix, but you never know.... I'm looking forward to getting the stickers!! Thanks!!

baggedcten · 02-07-2008, 09:29 AM

Quote:

Originally Posted by Dinos63

Gots some parts and fittings this week,I haven't had much time after work this week to work on my 78,but did get some done on friday night.I mocked the air compressor and valves,hope to finsh and install it on saturday

Nice trucks man a few questions are those two batteries for the oasis only or one of them for the truck and the other for the oasis????? How do like it the oasis is it worth the money????DO you use it daily??? thanks man!

Slammed '87 · 02-07-2008, 09:55 AM

Hey Dino, i need some help and i was wondering if ya could help me out? I have an '87 that is laying rocker now with a ART triangulated 4 link. I wanna change it out to the KPC 6 link but i need to make sure i have room for it first. All i need to know is how low the canti part hangs below the bottom of the frame. (see pic) Currently the bottom of my frame to the ground is 3.75" so i just need to make sure that it doesn't hang lower than this. Help would be awesome! Thanks, Dean/ Slammed '87

slimbailess · 02-07-2008, 11:13 AM

hey, dino, wanna send a sticker to texas?

Michael Hill · 02-07-2008, 11:37 AM

Dino, who helped you with the rims and tires? I have an 86 GMC half ton fleetside and are looking to put 22s out back and 20s up front but dont know what will work? Any help on who I could talk too would be great. Im also in Arizona out in Goodyear. Truck looks KILLER Im really jealous, later Michael.

Dinos63 · 02-07-2008, 12:48 PM

Quote:

Originally Posted by baggedcten

Nice trucks man a few questions are those two batteries for the oasis only or one of them for the truck and the other for the oasis????? How do like it the oasis is it worth the money????DO you use it daily??? thanks man!

This is the set up i have used on my panel and my 66 ,I use the oasis which i love, for me i have other cars and trucks with small air ride system and you can't beat the speed and dependality of the oasis, this is my third one, I use three red tops at 860 cold cranking amps,and the oasis (hp3000) is 60 amps when it runs , but only runs under a minute to fill my 5 gallon tank to about 150psi , this is my 66 set up

Dinos63 · 02-07-2008, 12:57 PM

Quote:

Originally Posted by Michael Hill

Dino, who helped you with the rims and tires? I have an 86 GMC half ton fleetside and are looking to put 22s out back and 20s up front but dont know what will work? Any help on who I could talk too would be great. Im also in Arizona out in Goodyear. Truck looks KILLER Im really jealous, later Michael.

Michael, is your truck lowered? ,the people at coys are cool to deal with, I don't like off the rack wheels meaning standard off sets that discount tire and all these cheezy wheel shops sell, let me know if you trucks lowered and how much, dino

Dinos63 · 02-07-2008, 01:03 PM

Quote:

Originally Posted by Slammed '87

Hey Dino, i need some help and i was wondering if ya could help me out? I have an '87 that is laying rocker now with a ART triangulated 4 link. I wanna change it out to the KPC 6 link but i need to make sure i have room for it first. All i need to know is how low the canti part hangs below the bottom of the frame. (see pic) Currently the bottom of my frame to the ground is 3.75" so i just need to make sure that it doesn't hang lower than this. Help would be awesome! Thanks, Dean/ Slammed '87

dean i can get that for ya on saturday, my trucks on the lift, i drove my 78 two weeks ago and man it drives nice with kp link, killer smooth, dean what size wheel are you running on the rear? you should have no problem with 20 or bigger i would think,but i will measure it for ya, dino

GMBowtie79 · 02-08-2008, 08:25 AM

I was also wondering what is the back spacing on those wheels? That truck looks awsome I would like to see my 79 burb lay rocker like that! If you feel like sending a sticker up to Turlock,CA. I will proudly fly it on mine.

02-01-2008, 11:50 AM	#52
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: It's Home ! nice i will be in my 66 and i will bring some stickers, Attached Images __________________ CHEVY ONLY... Nothin Else !

02-01-2008, 12:18 PM	#53
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: It's Home ! I'll take the sticker connected to the white '78! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-01-2008, 12:32 PM	#54
gojo00 Registered User Join Date: Aug 2006 Location: Dallas Posts: 61	Re: It's Home ! Nice trucks! I'll take one 'em white stickers. __________________ 04 Chevy X Cab 67 Chevy SWB (LuLu) 15 GMC Sierra Crew

02-01-2008, 03:04 PM	#55
87nightmare Registered User Join Date: Jan 2008 Location: bonaqua,Tn Posts: 13	Re: It's Home ! nice truck thats what its all about so how many $$$$ will it take me to bag my 87 it seems like every place i look $3000 seems to be the norm

02-03-2008, 01:56 PM	#57
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: It's Home ! Gots some parts and fittings this week,I haven't had much time after work this week to work on my 78,but did get some done on friday night.I mocked the air compressor and valves,hope to finsh and install it on saturday Attached Images __________________ CHEVY ONLY... Nothin Else !

02-05-2008, 07:08 PM	#58
los-lowrider Registered User Join Date: Feb 2005 Location: Germany, Krefeld Posts: 180	Re: It's Home ! Dino, I love your trucks! Great work, definately one of the lowest I've ever seen. __________________ Best Regards from Germany! *www.los-lowrider.com*

02-05-2008, 11:13 PM	#59
andresco50 Registered User Join Date: Jan 2008 Location: Lakeworth, Fl Posts: 633	Re: It's Home ! I love your trucks awesome can you post more pics of the white one ? __________________ 2001 silverado 2wd 2003 silverado 4wd 1975 scottsdale c10 (project)

02-06-2008, 12:46 PM	#62
1984 swb chevy Registered User Join Date: Nov 2007 Location: New Jersey Posts: 466	Re: It's Home ! Nice truck.. It makes me miss my 78 chevy.

02-07-2008, 09:55 AM	#69
Slammed '87 Registered User Join Date: Feb 2003 Location: Calgary Canada Posts: 556	Re: It's Home ! Hey Dino, i need some help and i was wondering if ya could help me out? I have an '87 that is laying rocker now with a ART triangulated 4 link. I wanna change it out to the KPC 6 link but i need to make sure i have room for it first. All i need to know is how low the canti part hangs below the bottom of the frame. (see pic) Currently the bottom of my frame to the ground is 3.75" so i just need to make sure that it doesn't hang lower than this. Help would be awesome! Thanks, Dean/ Slammed '87 Attached Images __________________ If you can't rock the roads with your bumpers 1/2" off the ground, you're nowhere near low enough!

02-07-2008, 11:13 AM	#70
slimbailess Registered User Join Date: Jul 2007 Location: Haltom City,TX Posts: 127	Re: It's Home ! hey, dino, wanna send a sticker to texas?

02-07-2008, 11:37 AM	#71
Michael Hill Registered User Join Date: Feb 2008 Location: Avondale, Arizona Posts: 54	Re: It's Home ! Dino, who helped you with the rims and tires? I have an 86 GMC half ton fleetside and are looking to put 22s out back and 20s up front but dont know what will work? Any help on who I could talk too would be great. Im also in Arizona out in Goodyear. Truck looks KILLER Im really jealous, later Michael.

02-08-2008, 08:25 AM	#75
GMBowtie79 Surviving, one day at a time! Join Date: Jan 2008 Location: Turlock,CA Posts: 295	Re: It's Home ! I was also wondering what is the back spacing on those wheels? That truck looks awsome I would like to see my 79 burb lay rocker like that! If you feel like sending a sticker up to Turlock,CA. I will proudly fly it on mine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.