Custom Built 1 ton 4x4 95% finished - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Purs · 07-25-2005, 10:45 AM

very nice. thumbs up on the color and the original hubcaps!

**Yukon Jack** · 07-25-2005, 11:21 AM

Thanks for the additional pics - that is just incredible!!!!!

timmosams · 07-25-2005, 12:26 PM

nice very nice

Jason915 · 07-25-2005, 12:29 PM

sweet! I love everything about it

arkracing · 07-25-2005, 03:58 PM

Stunning truck man. That is super nice and nothing beats a 454 4x4 with a GV overdrive!!!!!!!!!

I'd take that over a new truck anyday!!!!

I found 1 Flaw with the whole thing...hey somone's gotta do it right???:

Look here I drew a little arrow, just take it off the key ring and you'll be good to go

don't need the demon's playing around with your new truck

Great work - and ditto on the awesome body panel alignment

Bram · 07-25-2005, 04:01 PM

You got that right! LOL, Good eye by the way.

BLAZERMAN · 07-26-2005, 12:08 AM

Thanks for the extra pics, can you give any info on the install of the GV overdrive behind the 205?. I've seen them mounted behind TH400s before, is that another special adapter between it and the transfer case?

Bram · 07-26-2005, 09:05 AM

Hey Blazerman, here are some wright up's from GV's site that are better than I could do. Hope this helps?
http://www.gearvendors.com/articles/...n04/index.html

http://www.gearvendors.com/articles/...p99/index.html

http://www.gearvendors.com/magazines.html

kobayashi · 07-26-2005, 12:13 PM

Bram you have built my dream truck. Just awesome.

Can you explain what chassis you started with and what it took to get where you are now? Just the basics on the chassis mainly.

And why is one of your header dumps turned inward towards the OD?

Bram · 09-29-2005, 03:21 PM

Kobayashi, the chassis is a 72 3/4 ton frame with a Dana 60 front end, 14 bolt rear end, a 454 with a th400, NP205 with Gear Vendors overdrive behind that. I'm running 4.10 gears, with a Detroit locker in the rear. It has a two-inch soft ride lift, with overload springs in the rear.

And why is one of your header dumps turned inward towards the OD?
Don't know why the exhaust guy did that?

70GMCer · 09-29-2005, 03:54 PM

Man.....GREAT looking !!!! "Semper Fi"

1969 C/K CST · 09-29-2005, 04:20 PM

Very nice.

boraxman · 09-29-2005, 04:33 PM

Boraxman says

T_Dilley · 09-29-2005, 09:28 PM

An all around Awesome truck.

Have fun with it..And don't forget to post up some pics of it and the GN.

nitor · 09-29-2005, 09:30 PM

Very nice looking truck.

red71cheyenne · 09-29-2005, 09:41 PM

Bram, super nice truck!!! Can't wait to get home and see it in person. My farm is in Seymour. What is the purpose of the header dumps? I've seen them, but don't know what they are for. Later, Jeff.

**special-K** · 09-29-2005, 10:04 PM

Awesome,subtle,yet awesome!That`s the kind of truck that people who know what they`re lookin`at can appreciate.

*wolfthing2000* · 09-29-2005, 10:32 PM

Now that is what it is all about!!!! You just filled my tanks with more insperation friend ( not that I realy needed more) but sometimes you need to look at long term projects like this one to regain the patience of that vision you have ( as you did).
Nice Job!! Passes inspection

llegos · 09-29-2005, 10:35 PM

lookin real good.

al's71gmc · 09-29-2005, 11:15 PM

That is Absolutely Awsome!! My grandpa's last vehicle was a 64 1/2 convertible mustang. Looks like we both had pretty cool gramps. The more pics you post the better that truck looks. Interior is sweet. Love the seats. Are those power windows and locks? 4x4 of the year in my book!! Do you plan on showing it? If so, you better put an addition on your home for a trophy room.

Russell · 09-30-2005, 12:03 AM

Holy cow that thing is amazing!

You're sure it didn't roll off the showroom at the dealership 5 minutes before you snapped those pics?

I mean, like WOW!!

**Canadian694x4** · 09-30-2005, 12:54 AM

Great Googly Moogly!!! Wicked Truck!

muddpile · 09-30-2005, 01:51 PM

That looks great! How do you like the custom autosound stereo, and where did ou pick it up? For me its that, glovebox or cut the dash.

Jimbotronics · 09-30-2005, 02:41 PM

Very very nice work my friend - looks awesome!

**gregfull** · 09-30-2005, 02:44 PM

Really nice truck, I like that STOUT look! Good job!

07-25-2005, 10:45 AM	#51
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	very nice. thumbs up on the color and the original hubcaps! __________________ "Experience is what you get when you didn't get what you wanted."

07-25-2005, 11:21 AM	#52
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Thanks for the additional pics - that is just incredible!!!!! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-25-2005, 12:29 PM	#54
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	sweet! I love everything about it __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

07-25-2005, 03:58 PM	#55
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Stunning truck man. That is super nice and nothing beats a 454 4x4 with a GV overdrive!!!!!!!!! I'd take that over a new truck anyday!!!! I found 1 Flaw with the whole thing...hey somone's gotta do it right???: Look here I drew a little arrow, just take it off the key ring and you'll be good to go don't need the demon's playing around with your new truck Great work - and ditto on the awesome body panel alignment Attached Images __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

07-25-2005, 04:01 PM	#56
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	You got that right! LOL, Good eye by the way. __________________ 72CheyenneSuper1ton4x4BigBlock

07-25-2005, 12:26 PM	#53
timmosams Registered User Join Date: Oct 2002 Location: Watauga, TN Posts: 65	nice very nice

07-26-2005, 12:08 AM	#57
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Thanks for the extra pics, can you give any info on the install of the GV overdrive behind the 205?. I've seen them mounted behind TH400s before, is that another special adapter between it and the transfer case? __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

07-26-2005, 09:05 AM	#58
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Hey Blazerman, here are some wright up's from GV's site that are better than I could do. Hope this helps? http://www.gearvendors.com/articles/...n04/index.html http://www.gearvendors.com/articles/...p99/index.html http://www.gearvendors.com/magazines.html __________________ 72CheyenneSuper1ton4x4BigBlock

07-26-2005, 12:13 PM	#59
kobayashi Registered User Join Date: Jul 2005 Location: Magnolia State Posts: 27	Bram you have built my dream truck. Just awesome. Can you explain what chassis you started with and what it took to get where you are now? Just the basics on the chassis mainly. And why is one of your header dumps turned inward towards the OD? __________________ k.

09-29-2005, 03:21 PM	#60
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Kobayashi, the chassis is a 72 3/4 ton frame with a Dana 60 front end, 14 bolt rear end, a 454 with a th400, NP205 with Gear Vendors overdrive behind that. I'm running 4.10 gears, with a Detroit locker in the rear. It has a two-inch soft ride lift, with overload springs in the rear. And why is one of your header dumps turned inward towards the OD? Don't know why the exhaust guy did that? __________________ 72CheyenneSuper1ton4x4BigBlock

09-29-2005, 03:54 PM	#61
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Man.....GREAT looking !!!! "Semper Fi" __________________ 1997 GMC Sierra Ext 1965 Mustang

09-29-2005, 04:20 PM	#62
1969 C/K CST A.K.A- Crummy Join Date: Jun 2005 Location: NC foothills Posts: 3,025	Very nice. __________________ 2003 Silverado Z71 Are fishermen all liars? Last edited by 1969 C/K CST; 09-29-2005 at 04:34 PM.

09-29-2005, 04:33 PM	#63
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	Boraxman says __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

09-29-2005, 09:28 PM	#64
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	An all around Awesome truck. Have fun with it..And don't forget to post up some pics of it and the GN.

09-29-2005, 09:30 PM	#65
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	Very nice looking truck. __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer



Register or Log In To remove these advertisements.

09-29-2005, 09:41 PM	#66
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Bram, super nice truck!!! Can't wait to get home and see it in person. My farm is in Seymour. What is the purpose of the header dumps? I've seen them, but don't know what they are for. Later, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

09-29-2005, 10:04 PM	#67
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Awesome,subtle,yet awesome!That`s the kind of truck that people who know what they`re lookin`at can appreciate. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-29-2005, 10:32 PM	#68
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Now that is what it is all about!!!! You just filled my tanks with more insperation friend ( not that I realy needed more) but sometimes you need to look at long term projects like this one to regain the patience of that vision you have ( as you did). Nice Job!! Passes inspection

09-29-2005, 10:35 PM	#69
llegos Registered User Join Date: Aug 2005 Location: pleasanton, CA Posts: 570	lookin real good. __________________ -Steve

09-29-2005, 11:15 PM	#70
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	That is Absolutely Awsome!! My grandpa's last vehicle was a 64 1/2 convertible mustang. Looks like we both had pretty cool gramps. The more pics you post the better that truck looks. Interior is sweet. Love the seats. Are those power windows and locks? 4x4 of the year in my book!! Do you plan on showing it? If so, you better put an addition on your home for a trophy room. __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

09-30-2005, 12:03 AM	#71
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Holy cow that thing is amazing! You're sure it didn't roll off the showroom at the dealership 5 minutes before you snapped those pics? I mean, like WOW!! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-30-2005, 12:54 AM	#72
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Great Googly Moogly!!! Wicked Truck! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

09-30-2005, 01:51 PM	#73
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	That looks great! How do you like the custom autosound stereo, and where did ou pick it up? For me its that, glovebox or cut the dash. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

09-30-2005, 02:41 PM	#74
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Very very nice work my friend - looks awesome! __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

09-30-2005, 02:44 PM	#75
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 599	Really nice truck, I like that STOUT look! Good job! __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

Register or Log In To remove these advertisements.