Moving sale - parts for sale - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wibilly · 12-01-2005, 12:07 AM

paul what have ya got left for doors i'm doin a 71 i think it's a 72 cab if that matters have 72 int any ways also need head liner trim if you have any driver side is broke thanks jim

Paul72 · 12-01-2005, 12:13 AM

I've got one guy thinking about them - should know his decision fairly soon. If he passes, they would be available for you.

I'll pm you when I have more info.

Paul

jmac · 12-01-2005, 03:47 PM

Hi put in the line for the two 71 doors L/R. and shipping to 28352. I'm ready to buy.

Thanks

Dick Dale · 12-02-2005, 07:46 AM

Hey Paul, I think I want the 283 and can pick up in Waterloo in a few weeks, probably weekend before Christmas. PM me for more info, I can't PM for some reason.

Paul72 · 12-02-2005, 07:33 PM

jmac - got you on the list.

pm sent to Dick Dale.

Paul72 · 12-04-2005, 10:23 AM

ttt

Paul72 · 12-05-2005, 09:20 PM

I also have a tow bar if anybody needs one. I bought it brand new from TSC on 8-10-05 and have used it twice for a total of 10 miles. I'm going to get a trailer instead.

I think it was around $140 new, It can be yours for half of that (plus shipping).

Paul72 · 12-12-2005, 10:47 PM

ttt

Heading back up to MN from Christmas to New Year's

DaHateTank · 12-13-2005, 07:59 PM

Dammit, those doors look pretty sweet! I need to check this place out more often. Right near me, as well.

Can you give me a ballpark of what you were asking, for them, Paul??

-Marty

Paul72 · 12-13-2005, 08:37 PM

I had $200 on the 71 doors, and $300 on the 72's.

Where about in Iowa are you?

Paul

DaHateTank · 12-14-2005, 01:00 AM

Sounds like they were a good deal, as well!!!

I live in Spencer (south of Okoboji) but travel to Clinton fairly often, to visit my parents. Usually go right through Waterloo on the trip.

Also coulda road tripped to Minnesota quite conveniently. Unfortunately, I was working on my house all summer, and now my road worthy pick up is stashed at the garage I built near their place...

I see I also coulda scored a 454 during the summer, from a guy up this way

I don't think the Escort, I have up here now, is up to carrying too many truck parts, Dammit!! LOL!!

Oh well, ya know what they say about snoozing...

Thanks for the info!!!

-Marty

Paul72 · 12-19-2005, 07:43 PM

ttt for the last time.

Heading up on friday for a week. Some stuff will be going in the dumpster - the garage needs to be empty by the end of the year.

**too much stuff** · 12-19-2005, 08:02 PM

Paul, what did the steering box come out of? If still available. How close to you get to mankato? I have a buddy coming up for new years and could deliver to me. Any other parts you need to move? Eric

wibilly · 12-19-2005, 08:37 PM

paul i never thought to ask you if you had the other green door panel or any mirrors for them 71 doors i got from you was gonna weld up the mounting holes but before i do i better figure out what i'm going to do for mirrors

Paul72 · 12-19-2005, 09:09 PM

wibilly - pm sent

Eric -

I could swing thru Mankato on my way to IA on the 30th. I got the steering box as one of the many 'spare parts' when I bought a truck.

As far as other parts, that front clip is taking up way too much room, and I have 3 wide steel wheels (6 bolt) that I don't need. I will also have a complete 4wd Blazer frame, less the front axle.

I'll sort thru the small stuff (visors, glove box doors, side markers, etc), keep what I need and probably pitch the rest.

Paul

farmtruckIII · 12-21-2005, 10:32 AM

Do you still have the GMC clip? If so would you sale the parking/turn sig. assemblies?

71swb4x4 · 12-21-2005, 10:45 AM

Paul
Do you have nice fenders for a 68 Chevy / 67-72 GMC?
Shawn

Paul72 · 12-21-2005, 07:05 PM

farm truck - I do have some turn signals and front side marker light assy's. I'll take some pictures and get them to you to look at.

Shawn - the clip is from the 69 GMC- the LF fender on the clip is in very nice shape, the RF has a ding and the usual cancer from the battery. I am willing to sell just the fender if you are looking for one.

Paul

lynnets · 12-22-2005, 02:18 AM

Hey...I'm in need of a few things...let me know if you have any of these:
steering wheel, heater control assembly for the dash, drivers side vent, taillight trim...Could you also include how much you're asking for each? thanks

farmtruckIII · 12-22-2005, 11:53 PM

Cool deal paul, you can e-mail the pics to mosholderspeedequipment@yahoo.com

12-01-2005, 12:07 AM	#51
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Moving sale - parts for sale paul what have ya got left for doors i'm doin a 71 i think it's a 72 cab if that matters have 72 int any ways also need head liner trim if you have any driver side is broke thanks jim

12-01-2005, 12:13 AM	#52
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale I've got one guy thinking about them - should know his decision fairly soon. If he passes, they would be available for you. I'll pm you when I have more info. Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

12-01-2005, 03:47 PM	#53
jmac Registered User Join Date: Oct 2001 Location: Maxton, NC Posts: 20	Re: Moving sale - parts for sale Hi put in the line for the two 71 doors L/R. and shipping to 28352. I'm ready to buy. Thanks

12-02-2005, 07:46 AM	#54
Dick Dale Excelsior, You Fathead. Join Date: Jun 2004 Location: Valparaiso, In Posts: 937	Re: Moving sale - parts for sale Hey Paul, I think I want the 283 and can pick up in Waterloo in a few weeks, probably weekend before Christmas. PM me for more info, I can't PM for some reason. __________________ Go Navy. The Sea Is Ours. Budget 350 Build http://67-72chevytrucks.com/vboard/s...38#post2264638 Last edited by Dick Dale; 12-02-2005 at 04:22 PM.

12-02-2005, 07:33 PM	#55
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale jmac - got you on the list. pm sent to Dick Dale. __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

12-04-2005, 10:23 AM	#56
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale ttt __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958 Last edited by Paul72; 12-11-2005 at 05:57 PM.

12-05-2005, 09:20 PM	#57
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	One more item.... I also have a tow bar if anybody needs one. I bought it brand new from TSC on 8-10-05 and have used it twice for a total of 10 miles. I'm going to get a trailer instead. I think it was around $140 new, It can be yours for half of that (plus shipping). __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

12-12-2005, 10:47 PM	#58
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale ttt Heading back up to MN from Christmas to New Year's __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

12-13-2005, 07:59 PM	#59
DaHateTank Registered User Join Date: Aug 2002 Location: Iowa Posts: 119	Re: Moving sale - parts for sale Dammit, those doors look pretty sweet! I need to check this place out more often. Right near me, as well. Can you give me a ballpark of what you were asking, for them, Paul?? -Marty Last edited by DaHateTank; 12-13-2005 at 07:59 PM.

12-13-2005, 08:37 PM	#60
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale I had $200 on the 71 doors, and $300 on the 72's. Where about in Iowa are you? Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

12-14-2005, 01:00 AM	#61
DaHateTank Registered User Join Date: Aug 2002 Location: Iowa Posts: 119	Re: Moving sale - parts for sale Sounds like they were a good deal, as well!!! I live in Spencer (south of Okoboji) but travel to Clinton fairly often, to visit my parents. Usually go right through Waterloo on the trip. Also coulda road tripped to Minnesota quite conveniently. Unfortunately, I was working on my house all summer, and now my road worthy pick up is stashed at the garage I built near their place... I see I also coulda scored a 454 during the summer, from a guy up this way I don't think the Escort, I have up here now, is up to carrying too many truck parts, Dammit!! LOL!! Oh well, ya know what they say about snoozing... Thanks for the info!!! -Marty

12-19-2005, 07:43 PM	#62
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale ttt for the last time. Heading up on friday for a week. Some stuff will be going in the dumpster - the garage needs to be empty by the end of the year. __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958 Last edited by Paul72; 12-19-2005 at 07:43 PM.

12-19-2005, 08:02 PM	#63
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: Moving sale - parts for sale Paul, what did the steering box come out of? If still available. How close to you get to mankato? I have a buddy coming up for new years and could deliver to me. Any other parts you need to move? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-19-2005, 08:37 PM	#64
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Moving sale - parts for sale paul i never thought to ask you if you had the other green door panel or any mirrors for them 71 doors i got from you was gonna weld up the mounting holes but before i do i better figure out what i'm going to do for mirrors __________________ common sense isn't so common anymore

12-19-2005, 09:09 PM	#65
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale wibilly - pm sent Eric - I could swing thru Mankato on my way to IA on the 30th. I got the steering box as one of the many 'spare parts' when I bought a truck. As far as other parts, that front clip is taking up way too much room, and I have 3 wide steel wheels (6 bolt) that I don't need. I will also have a complete 4wd Blazer frame, less the front axle. I'll sort thru the small stuff (visors, glove box doors, side markers, etc), keep what I need and probably pitch the rest. Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958



Register or Log In To remove these advertisements.

12-21-2005, 10:32 AM	#66
farmtruckIII 71 GMC 454/TH400 Join Date: Dec 2005 Location: Blue Mound TX Posts: 214	Re: Moving sale - parts for sale Do you still have the GMC clip? If so would you sale the parking/turn sig. assemblies?

12-21-2005, 10:45 AM	#67
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Moving sale - parts for sale Paul Do you have nice fenders for a 68 Chevy / 67-72 GMC? Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-21-2005, 07:05 PM	#68
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Moving sale - parts for sale farm truck - I do have some turn signals and front side marker light assy's. I'll take some pictures and get them to you to look at. Shawn - the clip is from the 69 GMC- the LF fender on the clip is in very nice shape, the RF has a ding and the usual cancer from the battery. I am willing to sell just the fender if you are looking for one. Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

12-22-2005, 02:18 AM	#69
lynnets Registered User Join Date: Aug 2005 Location: near Vancouver Canada Posts: 30	Re: Moving sale - parts for sale Hey...I'm in need of a few things...let me know if you have any of these: steering wheel, heater control assembly for the dash, drivers side vent, taillight trim...Could you also include how much you're asking for each? thanks

12-22-2005, 11:53 PM	#70
farmtruckIII 71 GMC 454/TH400 Join Date: Dec 2005 Location: Blue Mound TX Posts: 214	Re: Moving sale - parts for sale Cool deal paul, you can e-mail the pics to mosholderspeedequipment@yahoo.com __________________ "The bigger you are the harder you fall, the farther you walk the longer you crawl."

Register or Log In To remove these advertisements.