Xmas In March, Thanks To Porterbuilt. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camaro__thunder · 04-04-2007, 12:36 AM

Here you go ! http://www.kugelkomponents.com/produ...akesystem.html

jlaird · 04-04-2007, 01:45 PM

Quote:

Originally Posted by camaro__thunder

Here you go ! http://www.kugelkomponents.com/produ...akesystem.html

did that pic come from cpp? I didn't see it at that link you posted? (I noticed the little cpp logo on the mc.

camaro__thunder · 04-04-2007, 08:22 PM

The pics on the left side, the master is from CPP. You can order from the site I posted.

dan468 · 04-05-2007, 07:38 PM

Mean Green...just ordered by BBC drop member. Did you hit any unseen speed bumps when installing the member? Anything on the truck you have to modify that you weren't expecting?
Thanks!

MEANGREEN70 · 04-06-2007, 08:18 AM

Quote:

Originally Posted by camaro__thunder

Here you go ! http://www.kugelkomponents.com/produ...akesystem.html

Camaro, thanks for the link.

MEANGREEN70 · 04-06-2007, 08:47 AM

Quote:

Originally Posted by dan468

Mean Green...just ordered by BBC drop member. Did you hit any unseen speed bumps when installing the member? Anything on the truck you have to modify that you weren't expecting?
Thanks!

Dan468, youre going to love it, I had no problems installing the crossmember at all. It weat on like buttter,
my hat goes of too porterbuilt for such beautiful product.I highly recommende.

Frizzle Fry · 04-06-2007, 02:04 PM

Hey Meangreen, your back wheels looks pretty deep (sick), do you have a stock rear? If so, can you post your wheel/tire specs pls?

Film Guy · 04-10-2007, 12:00 AM

Hey Meangreen70, Love your truck. looks like its settin right. I am also in your neighbor hood. We should get together some time.

Have you found a replacement front end yet?

MEANGREEN70 · 04-10-2007, 10:52 PM

Quote:

Originally Posted by Frizzle Fry

Hey Meangreen, your back wheels looks pretty deep (sick), do you have a stock rear? If so, can you post your wheel/tire specs pls?

Frizzle, yes my rear end is stock, the wheel is a 10x20. The tire is a 255/35zr20, I had to widen the bed 3in to make the wheel,tire combo fit. I didn't want to go with a narrow wheel, so i got the 10in wheel.

MEANGREEN70 · 04-10-2007, 11:01 PM

Quote:

Originally Posted by Film Guy

Hey Meangreen70, Love your truck. looks like its settin right. I am also in your neighbor hood. We should get together some time.

Have you found a replacement front end yet?

Film guy, thanks its been a lot of work.what area are you in?

No i have not found a front body clip yet, do you know where can i find one?

MEANGREEN70 · 04-10-2007, 11:05 PM

Some pics of the rear end, still needs lots of work.

royo · 04-11-2007, 03:07 AM

wow lots of work there allready looks good

SCOTI · 04-18-2007, 05:37 PM

MeanGreen70..... You have PM.

leftcoast66 · 04-18-2007, 06:23 PM

That's a great setup, I love the truck w/ the wheels and the stance, they all come together nice and look great.

MEANGREEN70 · 04-23-2007, 10:54 PM

Got a little time to work on the old girl this wk end, so i box the notch in. Here are some before- after pics.

the before.

MEANGREEN70 · 04-23-2007, 10:56 PM

[QUOTE=MEANGREEN70;2141853]Got a little time to work on the old girl this wk end, so i box the notch in. Here are some before- after pics.

after.

itsmike2k · 04-24-2007, 01:24 AM

What kinda wheels are those? what BS did you use on them? Your Truck looks great..

jlaird · 04-24-2007, 09:23 AM

nice job on the notch! Looks clean.

MEANGREEN70 · 04-24-2007, 09:39 PM

Quote:

Originally Posted by itsmike2k

What kinda wheels are those? what BS did you use on them? Your Truck looks great..

Mike, the wheels are boyd coddington smoothie II.

MEANGREEN70 · 04-24-2007, 09:40 PM

Quote:

Originally Posted by jlaird

nice job on the notch! Looks clean.

thanks jlaird.

SCOTI · 04-25-2007, 12:59 PM

Quote:

Originally Posted by itsmike2k

Here's those pictures of the frame where i cut for the ac

Not much left there.

itsmike2k · 04-25-2007, 03:09 PM

Yea i plan on boxing it in to make it a bit stronger when i pull the engine..

MEANGREEN70 · 04-25-2007, 08:40 PM

Today was power rack day,

is not polish or chrome, but maybe by the final Assembly it will. I also got the header in place. the truck sits on its frame, and not on the rockers. Wish is what I want it, so far everything is going on like butter. You gotta love the craftsmanship on the crossmenber, everything fits perfect on it.

64shortc10 · 04-26-2007, 01:20 AM

Meangreen,

Your truck is looking good! I'm playing catch up to you, I got my Dropmember, my Art strongarms, and my spindles on. Now i just need to install my power rack. Then I can do the rear. Did you just cut up and bend a standard c-notch? Was it a 10 in.? I think I need 11 inches to lay on 22's.
I'm going to order a Kp notch after I work some more overtime! Keep up the progress because your motivating me to work on mine! Again lookin good!

Tony from Norcal

MEANGREEN70 · 04-26-2007, 09:28 PM

Quote:

Originally Posted by 64shortc10

Meangreen,

Your truck is looking good! I'm playing catch up to you, I got my Dropmember, my Art strongarms, and my spindles on. Now i just need to install my power rack. Then I can do the rear. Did you just cut up and bend a standard c-notch? Was it a 10 in.? I think I need 11 inches to lay on 22's.
I'm going to order a Kp notch after I work some more overtime! Keep up the progress because your motivating me to work on mine! Again lookin good!

Tony from Norcal

Tony, thanks for the complement. The c-notch is a 10in, it came with the complete kit that i bought, the notch was not bent, i bent it myself.
Hope we can see pics of your truck soon.

04-04-2007, 12:36 AM	#51
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: Xmas In March, Thanks To Porterbuilt. Here you go ! http://www.kugelkomponents.com/produ...akesystem.html __________________ My Project 69 SWB SHAVED BAGGED DOORED

04-04-2007, 08:22 PM	#53
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: Xmas In March, Thanks To Porterbuilt. The pics on the left side, the master is from CPP. You can order from the site I posted. __________________ My Project 69 SWB SHAVED BAGGED DOORED

04-05-2007, 07:38 PM	#54
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: Xmas In March, Thanks To Porterbuilt. Mean Green...just ordered by BBC drop member. Did you hit any unseen speed bumps when installing the member? Anything on the truck you have to modify that you weren't expecting? Thanks!

04-06-2007, 02:04 PM	#57
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Xmas In March, Thanks To Porterbuilt. Hey Meangreen, your back wheels looks pretty deep (sick), do you have a stock rear? If so, can you post your wheel/tire specs pls?

04-10-2007, 12:00 AM	#58
Film Guy Junior Member Join Date: Aug 2004 Location: Dallas, Tx Posts: 105	Re: Xmas In March, Thanks To Porterbuilt. Hey Meangreen70, Love your truck. looks like its settin right. I am also in your neighbor hood. We should get together some time. Have you found a replacement front end yet?

04-10-2007, 11:05 PM	#61
MEANGREEN70 Registered User Join Date: Aug 2005 Location: SACHSE,TX Posts: 132	Re: Xmas In March, Thanks To Porterbuilt. Some pics of the rear end, still needs lots of work. Attached Images

04-11-2007, 03:07 AM	#62
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: Xmas In March, Thanks To Porterbuilt. wow lots of work there allready looks good __________________ nickle and dime

04-18-2007, 05:37 PM	#63
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: Xmas In March, Thanks To Porterbuilt. MeanGreen70..... You have PM. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-18-2007, 06:23 PM	#64
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: Xmas In March, Thanks To Porterbuilt. That's a great setup, I love the truck w/ the wheels and the stance, they all come together nice and look great.

04-23-2007, 10:54 PM	#65
MEANGREEN70 Registered User Join Date: Aug 2005 Location: SACHSE,TX Posts: 132	Re: Xmas In March, Thanks To Porterbuilt. Got a little time to work on the old girl this wk end, so i box the notch in. Here are some before- after pics. the before. Attached Images

04-23-2007, 10:56 PM	#66
MEANGREEN70 Registered User Join Date: Aug 2005 Location: SACHSE,TX Posts: 132	Re: Xmas In March, Thanks To Porterbuilt. [QUOTE=MEANGREEN70;2141853]Got a little time to work on the old girl this wk end, so i box the notch in. Here are some before- after pics. after. Attached Images

04-24-2007, 01:24 AM	#67
itsmike2k Registered User Join Date: Apr 2007 Location: Vegas Posts: 228	Re: Xmas In March, Thanks To Porterbuilt. What kinda wheels are those? what BS did you use on them? Your Truck looks great..

04-24-2007, 09:23 AM	#68
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Xmas In March, Thanks To Porterbuilt. nice job on the notch! Looks clean.

04-25-2007, 03:09 PM	#72
itsmike2k Registered User Join Date: Apr 2007 Location: Vegas Posts: 228	Re: Xmas In March, Thanks To Porterbuilt. Yea i plan on boxing it in to make it a bit stronger when i pull the engine..

04-25-2007, 08:40 PM	#73
MEANGREEN70 Registered User Join Date: Aug 2005 Location: SACHSE,TX Posts: 132	Re: Xmas In March, Thanks To Porterbuilt. Today was power rack day, is not polish or chrome, but maybe by the final Assembly it will. I also got the header in place. the truck sits on its frame, and not on the rockers. Wish is what I want it, so far everything is going on like butter. You gotta love the craftsmanship on the crossmenber, everything fits perfect on it. Attached Images Last edited by MEANGREEN70; 04-25-2007 at 08:54 PM.



Register or Log In To remove these advertisements.

04-26-2007, 01:20 AM	#74
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: Xmas In March, Thanks To Porterbuilt. Meangreen, Your truck is looking good! I'm playing catch up to you, I got my Dropmember, my Art strongarms, and my spindles on. Now i just need to install my power rack. Then I can do the rear. Did you just cut up and bend a standard c-notch? Was it a 10 in.? I think I need 11 inches to lay on 22's. I'm going to order a Kp notch after I work some more overtime! Keep up the progress because your motivating me to work on mine! Again lookin good! Tony from Norcal

Register or Log In To remove these advertisements.