parting out 1972 cheyenne super lwb - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ClassicRedneck05 · 05-28-2007, 02:51 PM

how about the steering column? if you still have it

67CHIP72 · 05-28-2007, 09:41 PM

Was the Cigar Lighter still available? If so, how much shipped? PM me with your info if it is please.

Down south truckin · 05-28-2007, 10:45 PM

misled i call it the diverter box your 3rd in line

oh no joe your 2nd line on the box behind ddp

ddp here are the pics the flap still moves by the lever but it is starting to break i'll take $25 plus shipping for it and 1 of the s ducts

68pos $150 for the dics and $50 for the booster/master cylinder shipping would be unreal

classic redneck $50 plus shipping for the column

67chip72 $20 plus shipping for the cigar lighter

i hope i've answered everones questions if not please remind me

thanks Mike

68 P.O.S. · 05-28-2007, 11:41 PM

Quote:

Originally Posted by Down south truckin

$150 for the dics and $50 for the booster/master cylinder shipping would be unreal

Yeah, I kind of figured that. I guess I'll pass.

OhNoJoe · 05-29-2007, 07:41 AM

What do you have left as far as the A/C sutff. Do you have the whole set-up

ClassicRedneck05 · 05-29-2007, 07:46 AM

Do you happen to already have the steering column pulled if so can you show some photo's thanks

ddp · 05-29-2007, 09:59 AM

Thanks for the detailed pics of the diverter box but it looks to be about the same condition as my original. I'll pass on the box and "s" duct. Thanks for your time.

Don

Down south truckin · 05-29-2007, 06:07 PM

Quote:

Originally Posted by OhNoJoe

What do you have left as far as the A/C sutff. Do you have the whole set-up

this one is just pieces but i have a complete system that just came off a truck a few months ago it had been sitting for 10-12 years so i don't know if it works or not but it was all there and complete $400 picked up thanks Mike

Down south truckin · 05-29-2007, 06:10 PM

Quote:

Originally Posted by ClassicRedneck05

Do you happen to already have the steering column pulled if so can you show some photo's thanks

i have a 69-70 style that is out or i could pull a 71-72 style tommorrow let me know thanks Mike

DennyB · 05-29-2007, 06:52 PM

Mike,
Is the lower rear trim behind the rear wheels any good (drivers quality)?

Thanks,

mcarwile1 · 05-29-2007, 07:36 PM

Is the evaporator housing in good shape? I need on for a 72 cheyenne. Thanks

Down south truckin · 05-29-2007, 07:55 PM

Quote:

Originally Posted by DennyB

Mike,
Is the lower rear trim behind the rear wheels any good (drivers quality)?

Thanks,

DennyB I'll check it out tommorrow and get back with you

Quote:

Originally Posted by mcarwile1

Is the evaporator housing in good shape? I need on for a 72 cheyenne. Thanks

I'll check but I'm 99% sure it is not busted

Down south truckin · 05-29-2007, 08:35 PM

Quote:

Originally Posted by ClassicRedneck05

Do you happen to already have the steering column pulled if so can you show some photo's thanks

classicredneck05 here are some pics of the 69-70 column it's $50 plus shipping in case anyone else is interested if classicredneck05 does'nt want it thanks Mike p.s. The steering wheel is not included at that price!

OhNoJoe · 05-29-2007, 11:55 PM

Will you ship on my dime?

ClassicRedneck05 · 05-30-2007, 06:06 AM

is the other column a tilt?

Down south truckin · 05-30-2007, 07:54 PM

Quote:

Originally Posted by OhNoJoe

Will you ship on my dime?

yes i will ship the stuff for the actual cost of shipping and packaging supplies are you talking about the whole A/C setup?

Down south truckin · 05-30-2007, 07:59 PM

Quote:

Originally Posted by ClassicRedneck05

is the other column a tilt?

I've got a truck tilt that has a little slop in the joint i have a friend that can tighten them up but i have'nt made time to get together with him i yhink it needs a lower bearing also i would let it go for $225 as is or if we repair it itwould be in the $275-$300 range thanks Mike

Down south truckin · 05-30-2007, 10:14 PM

dennyb the moulding on 2 trucks that i can get to easily are all bent i'll keep looking

mcarwile1 here are pics of the evaporator housing i hope this is the part your looking for i did not see any cracks $25 plus shipping i think the p/o pulled the evaporator to sell for scrap metal

ClassicRedneck05 · 05-31-2007, 02:52 PM

well if you already have someone to repair it then i wouldn't mind paying that extra few just to have a better column

AH619 · 06-01-2007, 01:35 PM

ill take the hump if shipping is reasonable 72601

*Shane* · 06-01-2007, 05:09 PM

Did that truck have black seat belts? If so, do you still have them? Interested in driver's, passenger, and center, IF they are black.

Thanks,
shane

Aarons72s · 06-01-2007, 10:48 PM

I am interested in the bushing/ nut that is in the cowl and can be seen under the dash that the pin on the end of the flapper goes into. It is not in the pic so I asome it is still on the cab. If it is still good could I get a pic and price to 73099, pending sneezys72 does not need it also. Thanks

KFreddy · 06-01-2007, 11:13 PM

I would be interested in the upper and lower body molding, any chance of some close up pics and a full count of whats there?

Thank You

Down south truckin · 06-03-2007, 11:10 PM

Quote:

Originally Posted by AH619

ill take the hump if shipping is reasonable 72601

AH619 shipping looks to be $18 let me p/m kwmech he has neither confirmed or denied his intrest in this hump thanks Mike

Down south truckin · 06-03-2007, 11:14 PM

Quote:

Originally Posted by Shane

Did that truck have black seat belts? If so, do you still have them? Interested in driver's, passenger, and center, IF they are
Thanks,
shane

shane this truck has parchment belts

Quote:

Originally Posted by Aarons72s

I am interested in the bushing/ nut that is in the cowl and can be seen under the dash that the pin on the end of the flapper goes into. It is not in the pic so I asome it is still on the cab. If it is still good could I get a pic and price to 73099, pending sneezys72 does not need it also. Thanks

I'll look at it tommorrow and get back to you

Quote:

Originally Posted by KFreddy

I would be interested in the upper and lower body molding, any chance of some close up pics and a full count of whats there?

Thank You

KFreddy I'll check them out

05-28-2007, 02:51 PM	#51
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: parting out 1972 cheyenne super lwb how about the steering column? if you still have it __________________ Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd

05-28-2007, 09:41 PM	#52
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: parting out 1972 cheyenne super lwb Was the Cigar Lighter still available? If so, how much shipped? PM me with your info if it is please. __________________ In Search Of

05-28-2007, 10:45 PM	#53
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: parting out 1972 cheyenne super lwb misled i call it the diverter box your 3rd in line oh no joe your 2nd line on the box behind ddp ddp here are the pics the flap still moves by the lever but it is starting to break i'll take $25 plus shipping for it and 1 of the s ducts 68pos $150 for the dics and $50 for the booster/master cylinder shipping would be unreal classic redneck $50 plus shipping for the column 67chip72 $20 plus shipping for the cigar lighter i hope i've answered everones questions if not please remind me thanks Mike Attached Images

05-29-2007, 07:41 AM	#55
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: parting out 1972 cheyenne super lwb What do you have left as far as the A/C sutff. Do you have the whole set-up

05-29-2007, 07:46 AM	#56
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: parting out 1972 cheyenne super lwb Do you happen to already have the steering column pulled if so can you show some photo's thanks __________________ Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd

05-29-2007, 09:59 AM	#57
ddp Registered User Join Date: Nov 2006 Location: Chicago IL Posts: 114	Re: parting out 1972 cheyenne super lwb Thanks for the detailed pics of the diverter box but it looks to be about the same condition as my original. I'll pass on the box and "s" duct. Thanks for your time. Don

05-29-2007, 06:52 PM	#60
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: parting out 1972 cheyenne super lwb Mike, Is the lower rear trim behind the rear wheels any good (drivers quality)? Thanks, __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

05-29-2007, 07:36 PM	#61
mcarwile1 Registered User Join Date: May 2007 Location: Amelia, Virginia Posts: 2	Re: parting out 1972 cheyenne super lwb Is the evaporator housing in good shape? I need on for a 72 cheyenne. Thanks

05-29-2007, 11:55 PM	#64
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: parting out 1972 cheyenne super lwb Will you ship on my dime?

05-30-2007, 06:06 AM	#65
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: parting out 1972 cheyenne super lwb is the other column a tilt? __________________ Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd

05-30-2007, 10:14 PM	#68
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: parting out 1972 cheyenne super lwb dennyb the moulding on 2 trucks that i can get to easily are all bent i'll keep looking mcarwile1 here are pics of the evaporator housing i hope this is the part your looking for i did not see any cracks $25 plus shipping i think the p/o pulled the evaporator to sell for scrap metal Attached Images

05-31-2007, 02:52 PM	#69
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: parting out 1972 cheyenne super lwb well if you already have someone to repair it then i wouldn't mind paying that extra few just to have a better column __________________ Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd

06-01-2007, 01:35 PM	#70
AH619 Registered User Join Date: Aug 2006 Location: HARRISON AR. Posts: 309	Re: parting out 1972 cheyenne super lwb ill take the hump if shipping is reasonable 72601 __________________ 72 2wd lwb cheyenne super youngest son.green/white 72 2wd lwb cheyenne super oldest son.green/white 71 4wd 3/4 cheyenne super frame off manderin copper / white 4 inch lift. FINALLY DONE / SOLD 72 4WD SWB CHEYENNE BLUE/WHITE 388 AUTO REMEMBER THE COPS NEVER THINK ITS AS FUNNY AS YOU DO. NORWOOD SURVIVOR COPPERTONE BUILD THREAD/ http://www.67-72chevytrucks.com/vboa...d.php?t=259856

06-01-2007, 05:09 PM	#71
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: parting out 1972 cheyenne super lwb Did that truck have black seat belts? If so, do you still have them? Interested in driver's, passenger, and center, IF they are black. Thanks, shane

06-01-2007, 10:48 PM	#72
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: parting out 1972 cheyenne super lwb I am interested in the bushing/ nut that is in the cowl and can be seen under the dash that the pin on the end of the flapper goes into. It is not in the pic so I asome it is still on the cab. If it is still good could I get a pic and price to 73099, pending sneezys72 does not need it also. Thanks Last edited by Aarons72s; 08-13-2007 at 03:42 AM.



Register or Log In To remove these advertisements.

06-01-2007, 11:13 PM	#73
KFreddy Active Member Join Date: Apr 2005 Location: Miami, Florida Posts: 286	Re: parting out 1972 cheyenne super lwb I would be interested in the upper and lower body molding, any chance of some close up pics and a full count of whats there? Thank You __________________ "The Great State of Florida"

Register or Log In To remove these advertisements.