2008 Truckin Nats in Maggie Valley, NC PARTS THREAD!!!!!!!!!

[Palf70Step]

Panel, depending on the pulley you get for the Pwr Str pump it could ride on any groove. I think I had mine and the alt on the same pulley. I just had to experiment with belt lengths.

71 super you have any pictures of the tailgate??

[Down south truckin]

Originally Posted by tommypic

yea , me needs a good passside inner fender and battery tray for a 67 . I will be ther Sat and Sun . I got to look might need other stuff too

Here is a inner fender I have been holding on to for a while,It's got some dings and surface rust $75

[Down south truckin]

Originally Posted by 5150

got any pics of the shroud?

Here are the pics of the shroud it has 1 tiny crack in 1 of the mounting holes

[Down south truckin]

Originally Posted by 1972Ryan

down south, how much for a set of rear bumper brackets? also any pics of the bumper?

Ryan you can see in the picture they are slightly bent but I think they will still bolt up and work I have an extra outer to replace the bent outer $40 for the brackets and shields here are some pictures of them and the bumper thanks Mike

[Down south truckin]

Originally Posted by 72BLUZ

i am looking for a rear flat window for my 72. i want to get rid of the slider.
if anyone has a good used one, send me a pm and let me know the price

here are a couple that I can bring $25 with out the moulding

[5150]

I'll take the shroud Down South

thanks

[Down south truckin]

5150 I'll bring it with me thanks!

would you believe I've got even more junk
15x7 rallies set of 4 $100
15x8 military hubcap type wheels $100
2 driver quality grills both have dings/dents $100
A/C dash $75
1-15x8 slot mag $20????

[Down south truckin]

I'm going to stop putting pictures unless there is a request
truck tilt nice $300
tach/air cluster new bezel $350
Power steering box $35
Power brake booster/master cylinder/brackets 3/4 ton $50
auto trans linkage 3 pieces $35
more to come!!

[67CHIP72]

I'd like those Military Wheels, but who knows how much it would cost to ship to 92660?

[tommypic]

I need both door panels for a 67 . project I just bought don't got non anybody got a set thats going to the valley and a price ? if to pricey might just get neighbor make some , he owns a upholster shop

[tommypic]

Originally Posted by Down south truckin

Here is a inner fender I have been holding on to for a while,It's got some dings and surface rust $75

That looks like mine I will pass on it thanks tho . what are those hd bezels off of in post 54 ?

[71 super]

Palf I will post a pic tonight when i get home from Baseball Harold

[tnblazerk5]

Originally Posted by tommypic

I need both door panels for a 67 . project I just bought don't got non anybody got a set thats going to the valley and a price ? if to pricey might just get neighbor make some , he owns a upholster shop

you wanting just the plain ol metal ones ?
with arm rest holes or with out the holes ?

[71see10]

Originally Posted by see ten

I'll have Brian take a pic of the glass and post it up tomorrow. It's over at his place.

The seal is hard not to soft and the knob on the glass has some rust on it.
Good glass,Just needs a washing,I"ll do that later, out of time! Thanks Brian

[tnblazerk5]

i will take it thanks for the pic
i plan on gettin to maggie sumtime later in the day friday (hopefully before the cruze at 6 lol) and will be there til sunday

[Down south truckin]

Originally Posted by tommypic

That looks like mine I will pass on it thanks tho . what are those hd bezels off of in post 54 ?

the headlight bezels are 71-72 aluminum I have several to chose from and I also have a few of the steel 69-70s as well thanks Mike

[1972Ryan]

is the bumper for a fleet or step?

[Down south truckin]

Originally Posted by 1972Ryan

is the bumper for a fleet or step?

It's for a fleetside

[5150]

add a set of 67-68 Headlight Bezels to my list

Also a set of drop shocks for an 88-98.

[tommypic]

Originally Posted by tnblazerk5

you wanting just the plain ol metal ones ?
with arm rest holes or with out the holes ?

dont matter I dont think

[tnblazerk5]

Originally Posted by 5150

add a set of 67-68 Headlight Bezels to my list

Also a set of drop shocks for an 88-98.

are the headlight bezels the chrome lookin ones or painted ?

Originally Posted by tommypic

dont matter I dont think

i got a few sets of those i get pics latter today or in the morning hows $20
i got to get them off the doors they are on, but i got to go to the other farm and work today and not sure when i will be back at this one lol

[tphsmith]

This is what I will take to the show for sale, if it don't say new its been used. Here we go, Ill be there till sunday late afternoon.
-set of rocker panels, were installed incorrectly was removed but very good condition $20 for the set will do both sides
-SB used starter still long life $10.
-inside cab heater box rebuilt no cracks $10.
-headlight bezels chrome not painted $20.00
-dome light with wire harness $15.00
-back up light lens, housings and wire pigtails $7.00
-stabilizer arm bushings sets large dia. and small dia. $2.00 for either
-in cab tire jack spring on passenger side $5.00
-cab vent tube for gas tank in cab gas tank $5.00
-Ignition switch housing and bezel $5.00
-throttle cable and kickdown cable bracket for SBC 2 kinds $5.00 ea
-brake proportioning valve bracket off M/C $2.00
-rubber peddle pads, park brake, brake, gas $3.00
-Auto tranny column selector L1,L2 lenses $1.00
-aftermarket windshield washer pump $2.00
-Dizzy hold down clamps, chrome or painted $2.00 ea. or $7.00 for all
-2 carb adaptor plates $7.00 each
-Acc, on, start ign. dash plate $1.00
vent window handles $4.00
iluminated wire for auto shift position pointer $15.00
illuminated cable for shift indicator $10.00
-1 ea. 3 core radiator top clamp with rubber $1.00
-original gauges out of instrument clusters, temp & batt, with mounting plate -2 ea.$5.00,
-2 ea. oil pressure gauges $5.00 ea.
-1 speedometer $5.00
-4 barrle air cleaner $5.00
-2 barrel air cleaner $5.00
-A/C hose main section very good condition $20.00
-windshield washer bottle plastic $2.00
-charcoal canister with mounting bracket $1500
-61 amp v groove alternator $10.00
-106 amp alt serpentine pulley $30.00
-serpentine crank pulley and idler pulley $15.00
-SBC brackets for under drive accessories for serpentine set up $50.00
-York air compressor belt driven V groove $30.00
-new style master cylinder $5.00
-driver window regulator fair condition for window crank $5.00
-choke cable original knob $15.00
-sbc fuel pump "new" $10.00
-lifting hooks for sbc motor factory $5.00
-28lb fuel injectors set $40.00
-bracket for 350 tranny linkage bracket bolts to tranny $5.00
-kickdown tranny cable 350 $10.00
-2 barrel carb electronic for inline 29 ? year 1981 remanufactured $100.00
-header to exhaust 3 bolt rings and gaskets $5.00
-68 tooth ring gear $35.00
-Chrome tail light bezels "brand new" and mounting clips $20.00
-1 ea. new door rubber $10.00
-new heater hose 3/4 x6ft $5.00
-new never used window cranks a set $7.00
-ring and pinion and crush sleeve for 12 bolt rearend brand new $120.00
-chrome aftermarket alt. bracket brand new $7.00
-89 Chevy truck radio, and power box, cassette player $50.00
-1 windshield wiper arm $2.00
-and I have a used pitted but not cracked windshield you can have if you tell me to bring it. it’s from my 72

all this and more but too much to list all prices can be negotiable


ohh and most important sorry for the miss spelling of words, I don’t need reminded...........
see ya in the valley!

[71 super]

Pictures of tailgate for Palf70Step

[tommypic]

tphsmith , whats the difference in the two ? I need the one for the auto shift pointer . iluminated wire for auto shift position pointer $15.00
illuminated cable for shift indicator $10.00

[Palf70Step]

71 super

I like, buy unfortunately I found out last night I haveto work this weekend so no Maggie Valley.

Are you going to the Board meet in July?