Building a Blazer - vtblazer's Way - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RAB38 · 08-04-2008, 08:36 AM

VT
Looking good. I like the looks especially with the hummer wheels

70rs/ss · 08-04-2008, 03:49 PM

Quote:

Originally Posted by vtblazer

I know what you mean, I was hoping they'd look good but wasn't positive I'd like em...I really do though.

With the H2's, the front tires are inside of the fenders, which in my state will getcha a ticket if their not. (bonus)

Still searching for one more H2 wheel for the spare if anybody comes across one...

I bought a set of 4 for $200 off of ebay and they sell singles quite a bit, too. I am using mine on my 72 2wd Blazer project with the 3/4 ton suspension I put under it!! I think they kinda look cool, again mine will be used on a 2wd with a 255/50 r 17 tire as the 2wd is lowered 4"/6". Very sweet, BTW I have a really nice orange Blazer gate, with the OE paint and all??

vtblazer · 08-08-2008, 06:30 AM

Pulled out a couple more parts that I've been saving for this build and let em meet each other...

Chevyman63 · 08-08-2008, 06:33 AM

Very nice...what might that be out of?

vtblazer · 08-08-2008, 06:51 AM

Quote:

Originally Posted by Chevyman63

Very nice...what might that be out of?

Motor is just a 355 crate and the TPI is from a Vette.

Chevyman63 · 08-08-2008, 06:54 AM

Quote:

Originally Posted by vtblazer

Motor is just a 355 crate and the TPI is from a Vette.

Awesome!

This thing is going to be very cool.

Big J · 08-08-2008, 07:44 AM

Quote:

Originally Posted by vtblazer

Motor is just a 355 crate and the TPI is from a Vette.

He said "just a 355 crate".

WOW is what I say.... Any plans for some purdy/cool stuff or going bare bones?

vtblazer · 08-08-2008, 08:17 AM

Quote:

Originally Posted by Big J

He said "just a 355 crate".

WOW is what I say.... Any plans for some purdy/cool stuff or going bare bones?

I wondered if I'd hear something about saying it that way...

Fairly basic for the most part, serp belt and maybe some alloy covers, that's it though.

**jaros44sr** · 08-08-2008, 09:16 AM

Quote:

Originally Posted by Big J

He said "just a 355 crate".

WOW is what I say.... Any plans for some purdy/cool stuff or going bare bones?

Yeah, "just an injected 355 crate", we should all be that unfortunate

**Yukon Jack** · 08-08-2008, 09:19 AM

So the motor is ready as is? That's cool. Will you be cleaning it up and slapping some paint on it?

vtblazer · 08-11-2008, 06:12 AM

Quote:

Originally Posted by jaros44sr

Yeah, "just an injected 355 crate", we should all be that unfortunate

There ya go again, bustin' on me...

Quote:

Originally Posted by Yukon Jack

So the motor is ready as is? That's cool. Will you be cleaning it up and slapping some paint on it?

It's the motor I pulled from the blue blazer in favor of the TBI'd 383 swap, it's still pretty fresh, just needs a bath.

The focus is on the build, not the bling.

Chevyman63 · 08-11-2008, 07:57 AM

Any progress over the weekend?

**jaros44sr** · 08-11-2008, 08:55 AM

That ain't bustin', that's jealousy

AJs72K5 · 08-11-2008, 09:59 AM

Quote:

Originally Posted by vtblazer

The focus is on the build, not the bling.

Amen to that.

vtblazer · 08-11-2008, 01:41 PM

Quote:

Originally Posted by Chevyman63

Any progress over the weekend?

Gathering info, deciding on suspension...phone calls to make this week.

Quote:

Originally Posted by jaros44sr

That ain't bustin', that's jealousy

Gotta 'nother one...want it?

Quote:

Originally Posted by AJs72K5

Amen to that.

I'd like to give you a shout regarding the Alcan springs, mind pm'ing your number?

Chevyman63 · 08-11-2008, 02:08 PM

Quote:

Originally Posted by vtblazer

Gathering info, deciding on suspension...phone calls to make this week.

Sorry, I'm a little anxious to see this one going together.

vtblazer · 08-11-2008, 03:15 PM

Quote:

Originally Posted by Chevyman63

Sorry, I'm a little anxious to see this one going together.

No worries...me too!

70rs/ss · 08-11-2008, 03:42 PM

I didn't forget ya on the tailgate, my IP is retarded so i can get on at work but not at home and cannot shoot picts from work. Hopefully tomorrow they will come and fix it?! Looking sweet, going to run nice with the EFI!!

vtblazer · 08-13-2008, 06:55 AM

Quote:

Originally Posted by 70rs/ss

I didn't forget ya on the tailgate

No real hurry, gotta get the frame/drivetrain done before I even think about the body & paint.

Did place my order for the shackle flip, engine cross member and disc conversion last night though.

Have another rolling chassis available now too, this will allow me to work on the frame I'll be using AND have the body portable.

Found an "oops" while looking over the tub the other day...

Dispite how careful we were when we laid the tub back onto the chassis, we missed one body bolt and being it didn't make the hole, it raised up the bed floor some.
Not a huge ordeal but still...

haus · 08-13-2008, 07:15 AM

i LOVE reading this thread!! vt, you make it sound so easy.

i know there's more to it than what i see, but you make it sound effortless - like you were looking for something insignificant in the garage (hmmm... where'd i put that tape measure) and "happened" to find a crate motor, tpi, and some 1 ton axles...

that's freakin awesome! looking forward to hearing more progress.

bummer about the oops...

BLUE THUNDER · 08-13-2008, 09:39 PM

A piece of 4x4 scrap and some persuasion will be plenty good to take care of the floor. Lookin good.

vtblazer · 08-15-2008, 06:19 AM

Quote:

Originally Posted by BLUE THUNDER

A piece of 4x4 scrap and some persuasion will be plenty good to take care of the floor. Lookin good.

Yeah, some wood and the BFH shouyld do it fine.

2x4's fit about right between the bed ribs.

Soon I'll use the wrecker to transfer the body over to the other rolling chassis that just became available and start working on the frame that it's sitting on now.

Chevyman63 · 08-15-2008, 06:29 AM

I'm on the edge of my seat...lets ROCK!!

jb4short · 08-15-2008, 07:05 AM

Kurt- I don't know if your putting big rubber on there or not; but I've got three brand new Goodyear H2 tires out here (never mounted)....let me go check the size

vtblazer · 08-15-2008, 07:09 AM

Quote:

Originally Posted by Tri-ProAutomotive

Kurt- I don't know if your putting big rubber on there or not; but I've got three brand new Goodyear H2 tires out here (never mounted)....let me go check the size

Running 37" MTR's but I am looking for one more H2 rim if you've got one.

Thanks for the offer.

08-04-2008, 08:36 AM	#51
RAB38 Registered User Join Date: Nov 2005 Location: Southern Maryland Posts: 164	Re: Building a Blazer - vtblazer's Way VT Looking good. I like the looks especially with the hummer wheels __________________ 72 Blazer CST 383 stroker roller, fuel inj, t350,NP205, D60 front, 14b rear, detroit locker, 38 x15.50 mtz's, welds, cross over steering, custom cage,Line X Spray in liner, House of Colors Tangelo Pearl Orange

08-08-2008, 06:30 AM	#53
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Building a Blazer - vtblazer's Way Pulled out a couple more parts that I've been saving for this build and let em meet each other... Attached Images

08-08-2008, 06:33 AM	#54
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Building a Blazer - vtblazer's Way Very nice...what might that be out of? __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

08-08-2008, 09:19 AM	#60
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Building a Blazer - vtblazer's Way So the motor is ready as is? That's cool. Will you be cleaning it up and slapping some paint on it? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-11-2008, 07:57 AM	#62
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Building a Blazer - vtblazer's Way Any progress over the weekend? __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

08-11-2008, 08:55 AM	#63
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Building a Blazer - vtblazer's Way That ain't bustin', that's jealousy __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

08-11-2008, 03:42 PM	#68
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Building a Blazer - vtblazer's Way I didn't forget ya on the tailgate, my IP is retarded so i can get on at work but not at home and cannot shoot picts from work. Hopefully tomorrow they will come and fix it?! Looking sweet, going to run nice with the EFI!!

08-13-2008, 07:15 AM	#70
haus MMMM Ramen! Join Date: Mar 2007 Location: Beavercreek, OH Posts: 118	Re: Building a Blazer - vtblazer's Way i LOVE reading this thread!! vt, you make it sound so easy. i know there's more to it than what i see, but you make it sound effortless - like you were looking for something insignificant in the garage (hmmm... where'd i put that tape measure) and "happened" to find a crate motor, tpi, and some 1 ton axles... that's freakin awesome! looking forward to hearing more progress. bummer about the oops... __________________ Tim - 1970 chevy blazer Last edited by haus; 08-13-2008 at 07:17 AM. Reason: i type too slow

08-13-2008, 09:39 PM	#71
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: Building a Blazer - vtblazer's Way A piece of 4x4 scrap and some persuasion will be plenty good to take care of the floor. Lookin good.

08-15-2008, 06:29 AM	#73
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Building a Blazer - vtblazer's Way I'm on the edge of my seat...lets ROCK!! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

08-15-2008, 07:05 AM	#74
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Building a Blazer - vtblazer's Way Kurt- I don't know if your putting big rubber on there or not; but I've got three brand new Goodyear H2 tires out here (never mounted)....let me go check the size



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.