pics of dropped 73-87's - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brad2 · 11-20-2002, 08:35 PM

That's right........I forgot all about that.

Izzy · 11-20-2002, 09:54 PM

Quote:

Originally posted by brad2
Wheels look familiar??? There may have been a blue truck on jackstands inside the garage. I have some 20's for it now.

Looks similiar to the wheels below.

low 84 · 11-20-2002, 09:58 PM

Quote:

Originally posted by fiveeightchevy

Looks similiar to the wheels below.

nice call hot shot. mabey b/c both trucks are/were his. did you get your kindy garden diploma yet

Izzy · 11-20-2002, 10:10 PM

Quote:

Originally posted by low 84

nice call hot shot. mabey b/c both trucks are/were his. did you get your kindy garden diploma yet

LOL... sorry I'm not up on the other sites news as much.

low 84 · 11-20-2002, 10:57 PM

Quote:

Originally posted by fiveeightchevy

LOL... sorry I'm not up on the other sites news as much.

hehe, i don't know why i'm always such a di(k when replying to your posts, but i just can't help it

LOHRTBT · 11-20-2002, 11:17 PM

Because he is such an assclown that is why!! hahahaah

Izzy · 11-21-2002, 12:36 AM

Quote:

Originally posted by low 84

hehe, i don't know why i'm always such a di(k when replying to your posts, but i just can't help it

It comes so naturally you can't help yourself.

low 84 · 11-21-2002, 11:58 AM

i ususaly am not a huge fan of the full phatom(except on daves of course

), but it look tight on this one

low 84 · 11-21-2002, 12:04 PM

almost looks like my version of mikes truck

never seen a short bed crew cab before. its decent looking

low 84 · 11-21-2002, 12:12 PM

this is a different look, but i don't discriminate, so here it is

low 84 · 11-21-2002, 12:16 PM

a better shot of the short bed crew cab

da burb

low 84 · 11-21-2002, 12:21 PM

these are contributions from 87 shortwides crew who has still not registered due to his lazyness

5/6

5/7

4/6

5/6

5/7

LOHRTBT · 11-21-2002, 01:09 PM

Quote:

Originally posted by low 84

Hate the color....love the truck.

That is the grille i want to do to my truck...with it down below like ....

BaggedC10 · 11-21-2002, 02:57 PM

Ryan---Could you post a link to where exactly you found the picture of that bagged red 73-80' C10? (The one with the tan leather interior). I want the fullsize pic. of it.

low 84 · 11-21-2002, 03:05 PM

is this the one? http://socalcustoms.com/Shows/2002/CruisinCure/72.jpg

if so that is the fullsize pic

BaggedC10 · 11-21-2002, 03:08 PM

Quote:

Originally posted by low 84
is this the one? http://socalcustoms.com/Shows/2002/CruisinCure/72.jpg

if so that is the fullsize pic

Thanks. I have many of the pics. saved that you have posted, but in larger format. I thought this would be the same, oh well. I love that truck.............

low 84 · 11-21-2002, 03:12 PM

here is the page i got it off of. there is an underhood pic also

http://socalcustoms.com/Shows/2002/CruisinCure/CC7.htm

brad2 · 11-21-2002, 07:50 PM

I belive the red truck was in Truckin mag this year. Don't recall which month though.

BaggedC10 · 11-21-2002, 08:13 PM

Quote:

Originally posted by brad2
I belive the red truck was in Truckin mag this year. Don't recall which month though.

It was in an issue of Street Trucks this year.

Not sure if it was in Truckin' though.

SCOTI · 11-22-2002, 09:12 PM

Anyone know who the black short/wide (thats slammed) towards the end of pg2 belongs to? I would like to get some suspension info/stats from them.

brad2 · 11-22-2002, 09:22 PM

Low C-10 your right........April Streettrucks on the red one.

low 84 · 11-23-2002, 03:24 AM

Quote:

Originally posted by SCOTI
Anyone know who the black short/wide (thats slammed) towards the end of pg2 belongs to? I would like to get some suspension info/stats from them.

i wish i knew man, but it was just a pic that someone posted on another board, that wasn't theirs and i copyied it to my harddrive. alls i know is its bagged

BaggedC10 · 11-23-2002, 05:43 AM

Quote:

Originally posted by SCOTI
Anyone know who the black short/wide (thats slammed) towards the end of pg2 belongs to? I would like to get some suspension info/stats from them.

Check out www.ridetech.com and search under owner vehicles or something. I've seen the same pic. there and it has some information.

love it loud · 11-23-2002, 12:50 PM

Owner Name: DAVID GONZALES
Location: TAYLOR TEXAS
E-mail address: DGonz@aol.com

SCOTI · 11-23-2002, 04:55 PM

Thanks for the info.

11-20-2002, 11:17 PM	#56
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Because he is such an assclown that is why!! hahahaah __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

11-21-2002, 11:58 AM	#58
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i ususaly am not a huge fan of the full phatom(except on daves of course), but it look tight on this one __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-21-2002, 12:04 PM	#59
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	almost looks like my version of mikes truck never seen a short bed crew cab before. its decent looking __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-21-2002, 12:12 PM	#60
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	this is a different look, but i don't discriminate, so here it is __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-21-2002, 12:16 PM	#61
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	a better shot of the short bed crew cab da burb __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-20-2002, 08:35 PM	#51
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	That's right........I forgot all about that.

11-21-2002, 12:21 PM	#62
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	these are contributions from 87 shortwides crew who has still not registered due to his lazyness 5/6 5/7 4/6 5/6 5/7 __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's Last edited by low 84; 11-24-2002 at 08:05 PM.

11-21-2002, 02:57 PM	#64
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Ryan---Could you post a link to where exactly you found the picture of that bagged red 73-80' C10? (The one with the tan leather interior). I want the fullsize pic. of it. __________________ 2001 Silverado bagged on 22's. Sold

11-21-2002, 03:05 PM	#65
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	is this the one? http://socalcustoms.com/Shows/2002/CruisinCure/72.jpg if so that is the fullsize pic __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-21-2002, 03:12 PM	#67
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	here is the page i got it off of. there is an underhood pic also http://socalcustoms.com/Shows/2002/CruisinCure/CC7.htm __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-21-2002, 07:50 PM	#68
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	I belive the red truck was in Truckin mag this year. Don't recall which month though.

11-22-2002, 09:12 PM	#70
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,089	Uuhhhhhhhh . . . Anyone know who the black short/wide (thats slammed) towards the end of pg2 belongs to? I would like to get some suspension info/stats from them. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 11-22-2002 at 09:15 PM.

11-22-2002, 09:22 PM	#71
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	Low C-10 your right........April Streettrucks on the red one.

11-23-2002, 12:50 PM	#74
love it loud Calibration Engineer Join Date: Oct 2002 Location: Windsor, Ontario, Canada Posts: 361	Owner Name: DAVID GONZALES Location: TAYLOR TEXAS E-mail address: DGonz@aol.com

11-23-2002, 04:55 PM	#75
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,089	Thanks for the info. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.