My new 64 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 10-10-2008, 10:26 AM

Quote:

Originally Posted by c10addict

Rear bags are mounted to a cross bar welded on the kp notch... shocks are are mounted the same way...

Like this.....

c10addict · 10-10-2008, 10:31 AM

Quote:

Originally Posted by SCOTI

Like this.....

Like that!

SCOTI · 10-10-2008, 10:34 AM

Thanks. Sorry about the zillion questions BTW.....

c10addict · 10-10-2008, 10:36 AM

Quote:

Originally Posted by SCOTI

Thanks. Sorry about the zillion questions BTW.....

Keep askin and I will keep answering! Thats what its all about!

AllenKarber · 10-10-2008, 11:14 PM

That's an AWESOME truck!!! I think the Torq-Thrusts would look great also.

MEANlowGREEN · 10-11-2008, 03:22 PM

That thing would look good lowered! I can hardly wait 'til I can get mine scraping the asphalt like that. I like that the hood still raises and closes the way the factory intended it to and that it has inner fenders. It looks great as is, can't wait to see it with the new wheels. I'd hang onto the old ones too though. Maybe through a set of wide whites on them then you could swap them back and forth to change it up every once in a while???

c10addict · 10-13-2008, 08:57 AM

Quote:

Originally Posted by MEANlowGREEN

That thing would look good lowered! I can hardly wait 'til I can get mine scraping the asphalt like that. I like that the hood still raises and closes the way the factory intended it to and that it has inner fenders. It looks great as is, can't wait to see it with the new wheels. I'd hang onto the old ones too though. Maybe through a set of wide whites on them then you could swap them back and forth to change it up every once in a while???

Love your user name... Esp maybe because I am from pittsburgh and grew up loving Mean Joe Greene!

PRORIDES · 10-13-2008, 09:10 AM

Go Steelers!!!

c10addict · 10-13-2008, 10:15 AM

Quote:

Originally Posted by PRORIDES

Go Steelers!!!

Welcome PRORIDES... I hear your building a 68... Wheres the pics?

MEANlowGREEN · 10-13-2008, 10:30 AM

Quote:

Originally Posted by c10addict

Love your user name... Esp maybe because I am from Pittsburgh and grew up loving Mean Joe Greene!

Thanks man, I am obviously a Mean Joe Greene fan too. That is what inspired me to name my '63 Chevy Project "MEANlowGREEN". My dad is from PA also. I've made many trips up there throughout the years. I've never been to Pittsburgh though. I've been to Gettysburg, to the cars shows at Carlisle, Allentown and some smaller towns in between. There is a lot of beautiful country up there.

suzq044 · 10-13-2008, 11:33 AM

here is the aforementioned photoshop request..

c10addict · 10-13-2008, 11:37 AM

Quote:

Originally Posted by suzq044

here is the aforementioned photoshop request..

Thanks!! Might stick with the steelies!

PRORIDES · 10-13-2008, 11:39 AM

Like the old wheels better!!!! Plus I know what you paid for the americans so you could sell them two me.

c10addict · 10-13-2008, 11:46 AM

Quote:

Originally Posted by PRORIDES

Like the old wheels better!!!! Plus I know what you paid for the americans so you could sell them two me.

Haven't paid nothin yet... Want them?

PRORIDES · 10-13-2008, 11:48 AM

Will you cover the shipping to me? Buddy

kizer · 10-13-2008, 11:56 AM

Man stick with the steelies. The mags look nice, but don't do your truck justice.

rodstored-72 · 10-13-2008, 02:53 PM

stick with the steeelies!!... hi-jack thread..... id user prorides.. is it the infamous shop "prorides"???

c10addict · 10-13-2008, 02:56 PM

Quote:

Originally Posted by PRORIDES

Will you cover the shipping to me? Buddy

consider them delivered!

c10addict · 10-13-2008, 02:57 PM

Quote:

Originally Posted by rodstored-72

stick with the steeelies!!... hi-jack thread..... id user prorides.. is it the infamous shop "prorides"???

I think he just stole their name!!

PRORIDES · 10-13-2008, 03:16 PM

Who stole what? Or who does what!!! C10 I found a few pictures of that old bucket in my files here.

c10addict · 10-13-2008, 03:22 PM

Quote:

Originally Posted by PRORIDES

Who stole what? Or who does what!!! C10 I found a few pictures of that old bucket in my files here.

Theres your pic SCOTI!!

Thanks PRORIDES! I kinda liked the wheels black!

SCOTI · 10-13-2008, 03:45 PM

Helpful indeed. Oh what a difference stance & rolling stock can make.
ProRides.... Forward any others if you have 'em.

64shortc10 · 10-22-2008, 05:23 PM

Your truck looks SWEET! I also have a dropmember on a 64 shortbed with a big back window. I was wondering what you used for hood hinges? Are they modified stock or off of something else? Again your truck looks SWEET!

Tony from Norcal.

SCOTI · 10-22-2008, 05:42 PM

Quote:

Originally Posted by 64shortc10

Your truck looks SWEET! I also have a dropmember on a 64 shortbed with a big back window. I was wondering what you used for hood hinges? Are they modified stock or off of something else? Again your truck looks SWEET!

Tony from Norcal.

I think this is the info you're looking for . . ....

Quote:

Originally Posted by c10addict

.....Hood hinges are off of a 57 chevy truck... Welded up a 2x4 box to the firewall to attach them too then fabbed an area under the hood to attach them to..

jonzcustomshop · 10-22-2008, 05:57 PM

I think I am outnumbered, but I like ther americans...

10-10-2008, 10:34 AM	#53
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: My new 64 Thanks. Sorry about the zillion questions BTW..... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-10-2008, 11:14 PM	#55
AllenKarber Registered User Join Date: Apr 2008 Location: Arkadelphia,Arkansas Posts: 199	Re: My new 64 That's an AWESOME truck!!! I think the Torq-Thrusts would look great also.

10-11-2008, 03:22 PM	#56
MEANlowGREEN Registered Asphalt Offender Join Date: Oct 2008 Location: Asheboro, NC Posts: 166	Re: My new 64 That thing would look good lowered! I can hardly wait 'til I can get mine scraping the asphalt like that. I like that the hood still raises and closes the way the factory intended it to and that it has inner fenders. It looks great as is, can't wait to see it with the new wheels. I'd hang onto the old ones too though. Maybe through a set of wide whites on them then you could swap them back and forth to change it up every once in a while??? __________________ It's not too low unless the tires won't reach the ground anymore! 1963 C10 Short Fleetside Bed Big Back Glass 1974 C10 Short Stepside Bed 1982 S10 Shortbed 350 EFI V8 http://67-72chevytrucks.com/vboard/a...hp?albumid=140 http://www.hubgarage.com/mygarage/MEANlowGREEN http://www.motortopia.com/garage/cars/MEANlowGREEN http://www.myspace.com/jcsmeed

10-13-2008, 09:10 AM	#58
PRORIDES Registered User Join Date: Sep 2008 Location: Pittsburgh Area Posts: 59	Re: My new 64 Go Steelers!!!

10-13-2008, 11:33 AM	#61
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: My new 64 here is the aforementioned photoshop request.. Attached Images __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn

10-13-2008, 11:39 AM	#63
PRORIDES Registered User Join Date: Sep 2008 Location: Pittsburgh Area Posts: 59	Re: My new 64 Like the old wheels better!!!! Plus I know what you paid for the americans so you could sell them two me.

10-13-2008, 11:48 AM	#65
PRORIDES Registered User Join Date: Sep 2008 Location: Pittsburgh Area Posts: 59	Re: My new 64 Will you cover the shipping to me? Buddy

10-13-2008, 11:56 AM	#66
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: My new 64 Man stick with the steelies. The mags look nice, but don't do your truck justice. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

10-13-2008, 02:53 PM	#67
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,008	Re: My new 64 stick with the steeelies!!... hi-jack thread..... id user prorides.. is it the infamous shop "prorides"???

10-13-2008, 03:16 PM	#70
PRORIDES Registered User Join Date: Sep 2008 Location: Pittsburgh Area Posts: 59	Re: My new 64 Who stole what? Or who does what!!! C10 I found a few pictures of that old bucket in my files here. Attached Images

10-13-2008, 03:45 PM	#72
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: My new 64 Helpful indeed. Oh what a difference stance & rolling stock can make. ProRides.... Forward any others if you have 'em. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 10-13-2008 at 03:46 PM.

10-22-2008, 05:23 PM	#73
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: My new 64 Your truck looks SWEET! I also have a dropmember on a 64 shortbed with a big back window. I was wondering what you used for hood hinges? Are they modified stock or off of something else? Again your truck looks SWEET! Tony from Norcal.

10-22-2008, 05:57 PM	#75
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: My new 64 I think I am outnumbered, but I like ther americans...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.