TX 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 12-02-2009, 11:30 PM

Quote:

Originally Posted by thirdstreettito

Bumper guards to 27501?

$75 shipped for the bumper guards, mainly becuase I will have to pull the bumper to get them off and I wasnt really looking to part this truck... They are in pretty pretty nice condition. They are about 15 yrs old, as my mom had a minor fender bender and the originals were replaced with new GM pieces at that time.

**WIDESIDE72** · 12-15-2009, 10:06 PM

It looks like I might be moving in the next few months, so any reasonable offer on the truck/ parts will be considered. Otherwise, it will be sent to the scrap yard shortly.

alf4444 · 12-16-2009, 11:01 PM

56" rear springs?

If so price shipped to 84118.

Thanks

**WIDESIDE72** · 12-17-2009, 10:24 AM

Quote:

Originally Posted by alf4444

56" rear springs?

If so price shipped to 84118.

Thanks

As stated earlier in the thread:

I will also not be selling any parts that would make the truck unable to be moved, such as wheels/ tires, axles, front suspension, steering column

timpage · 12-27-2009, 03:51 PM

Does your Suburban still have the auxillary (driviers side) battery tray?

**WIDESIDE72** · 12-28-2009, 12:56 PM

Quote:

Originally Posted by timpage

Does your Suburban still have the auxillary (driviers side) battery tray?

It does still have the auxillary tray. It is in good shape and not rusted. I would like to get $20 + shipping. I can take a pic or two if you are interested.

timpage · 12-28-2009, 09:49 PM

Quote:

Originally Posted by WIDESIDE72

It does still have the auxillary tray. It is in good shape and not rusted. I would like to get $20 + shipping. I can take a pic or two if you are interested.

I'll take it, I sent ya a PM. Thanks

**WIDESIDE72** · 12-31-2009, 11:56 AM

Tailgate has been sold. Doors are almost perfect, no dents, no filler, original paint

**crossy** · 12-31-2009, 07:13 PM

wideside very interested in the tilt you pm'd me about. i can tell you what to do to make it easier to ship. they weigh around 25# boxed. shipping would be to 08070. I'm pretty sure the seat belts are different in a burb than a pickup .thanx , crossy
email me ASAP
dbcrossy@verizon.net

**WIDESIDE72** · 01-03-2010, 07:06 PM

Quote:

Originally Posted by crossy

wideside very interested in the tilt you pm'd me about. i can tell you what to do to make it easier to ship. they weigh around 25# boxed. shipping would be to 08070. I'm pretty sure the seat belts are different in a burb than a pickup .thanx , crossy
email me ASAP
dbcrossy@verizon.net

PM sent regrding tilt column. It is for sale $125 + shipping

**WIDESIDE72** · 01-03-2010, 07:09 PM

All four doors are almost PERFECT. There is one scape about 6" long and 3/4" wide on the passenger rear door. There are no dents on the other three doors. All four doors have working power windows and locks. The glass, including wing windows is in great shape on all four. The rear doors have factory dark tint. front doors have aftermarket 3M tint that is in "OK" condition. The doors have original paint, no filler, surface rust on bottoms only. I know this because this truck has been in my family since new. The front doors would be a great addition to your old project if you want to add power windows and locks. The doors are currently still on the truck to keep them from getting messed up. I can help pull them.
Front doors $75 each, $125/ pair
Rear doors $50 each, $75 pair
$175 for all four

This truck also has a very good front clip. The driver fender is almost perfect. There are a couple of small dents on the pass fender. One dent on the pass side of hood. No rust other than surface anywhere, including radiator support and inner fenders.
Driver fender $60
Pass fender $40
Hood $40
$150 for complete clip including radiator support and inner fenders

Tilt steering column works great, dimmer switch on floor, no slop in tilt assy, key included. $125

OEM stainless steel mirrors, good glass, no dents $25 each, $40 pair

$400 for everything

Whole truck for $500 with clear Texas title! No engine, transmission or rear tailgate

**WIDESIDE72** · 01-03-2010, 07:12 PM

Driver side auxillary battery tray is a little rust, but usable as is or fixable if you want a nice one. $20+ shipping. Pass side tray is in good shape. $10 plus shipping. No shipping on large pieces like doors, fenders. Will ship seering column. Let me know if there are any small parts you need.

**crossy** · 01-04-2010, 06:47 AM

found tilt column yesterday locally, thanx, crossy

ECU PIRATE · 01-06-2010, 09:22 AM

Do you still have the parklights from the front bumper? What could you do on these plus shipping to 20121.

Thanks,

Mike

**WIDESIDE72** · 01-06-2010, 11:34 AM

Quote:

Originally Posted by ECU PIRATE

Do you still have the parklights from the front bumper? What could you do on these plus shipping to 20121.

Thanks,

Mike

The driver side is broken. Pass side is fogged pretty bad.

ECU PIRATE · 01-06-2010, 11:51 AM

Quote:

Originally Posted by WIDESIDE72

The driver side is broken. Pass side is fogged pretty bad.

Thanks,

Mike

**WIDESIDE72** · 01-26-2010, 08:15 PM

Ttt

bigarmzz · 01-26-2010, 10:17 PM

Quote:

Originally Posted by WIDESIDE72

$75 shipped for the bumper guards, mainly becuase I will have to pull the bumper to get them off

you dont need to take the bumper off to take off the guards...there easily accessible

scooterskoolkustoms · 02-20-2010, 09:16 AM

6.2 that is a diesel right? PM me would like to buy whats left of the truck.

**WIDESIDE72** · 02-22-2010, 01:44 PM

Front doors, rear tailgate and 86 grill are sold.

This truck also has a very good front clip. The driver fender is almost perfect. There are a couple of small dents on the pass fender. One dent on the pass side of hood. No rust other than surface anywhere, including radiator support and inner fenders.

Driver fender $60
Pass fender $40
Hood $40
front bumper $40
bumper guards $50
1986 Silverado 4 headlight trim rings $20
original 82 Silverado grill and headlight rings $50

$200 for complete clip including fenders, grill, bumper, radiator support and inner fenders

diesel gauge cluster (no trim panel)Gear indicator needle/ assy is NOT broken. Cable fastener that attaches to steering column is missing $20

Tight tilt steering column works great, dimmer switch on floor, no slop in tilt assy, key included. $125

$400 for everything

Whole truck for $500 with clear title!

**WIDESIDE72** · 02-22-2010, 01:57 PM

pics

**WIDESIDE72** · 02-22-2010, 02:00 PM

There is also a nice "Carmine Red" velour dash mat $20
stainless steel rear air deflector right side plastic trim corner broken off $20

**WIDESIDE72** · 02-22-2010, 02:01 PM

pic

**WIDESIDE72** · 02-22-2010, 02:02 PM

more pics

ECU PIRATE · 02-22-2010, 03:21 PM

Wideside72,

DO you still have the original grill and head light bezels from the Burb? If so, do you have any pics?

12-15-2009, 10:06 PM	#52
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans It looks like I might be moving in the next few months, so any reasonable offer on the truck/ parts will be considered. Otherwise, it will be sent to the scrap yard shortly.

12-16-2009, 11:01 PM	#53
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans 56" rear springs? If so price shipped to 84118. Thanks __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-27-2009, 03:51 PM	#55
timpage Registered User Join Date: Nov 2009 Location: Bend, Oregon Posts: 43	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Does your Suburban still have the auxillary (driviers side) battery tray?

12-31-2009, 11:56 AM	#58
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Tailgate has been sold. Doors are almost perfect, no dents, no filler, original paint

12-31-2009, 07:13 PM	#59
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans wideside very interested in the tilt you pm'd me about. i can tell you what to do to make it easier to ship. they weigh around 25# boxed. shipping would be to 08070. I'm pretty sure the seat belts are different in a burb than a pickup .thanx , crossy email me ASAP dbcrossy@verizon.net __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

01-03-2010, 07:09 PM	#61
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans All four doors are almost PERFECT. There is one scape about 6" long and 3/4" wide on the passenger rear door. There are no dents on the other three doors. All four doors have working power windows and locks. The glass, including wing windows is in great shape on all four. The rear doors have factory dark tint. front doors have aftermarket 3M tint that is in "OK" condition. The doors have original paint, no filler, surface rust on bottoms only. I know this because this truck has been in my family since new. The front doors would be a great addition to your old project if you want to add power windows and locks. The doors are currently still on the truck to keep them from getting messed up. I can help pull them. Front doors $75 each, $125/ pair Rear doors $50 each, $75 pair $175 for all four This truck also has a very good front clip. The driver fender is almost perfect. There are a couple of small dents on the pass fender. One dent on the pass side of hood. No rust other than surface anywhere, including radiator support and inner fenders. Driver fender $60 Pass fender $40 Hood $40 $150 for complete clip including radiator support and inner fenders Tilt steering column works great, dimmer switch on floor, no slop in tilt assy, key included. $125 OEM stainless steel mirrors, good glass, no dents $25 each, $40 pair $400 for everything Whole truck for $500 with clear Texas title! No engine, transmission or rear tailgate Attached Images

01-03-2010, 07:12 PM	#62
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Driver side auxillary battery tray is a little rust, but usable as is or fixable if you want a nice one. $20+ shipping. Pass side tray is in good shape. $10 plus shipping. No shipping on large pieces like doors, fenders. Will ship seering column. Let me know if there are any small parts you need. Attached Images

01-04-2010, 06:47 AM	#63
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans found tilt column yesterday locally, thanx, crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

01-06-2010, 09:22 AM	#64
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Do you still have the parklights from the front bumper? What could you do on these plus shipping to 20121. Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

01-26-2010, 08:15 PM	#67
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Ttt

02-20-2010, 09:16 AM	#69
scooterskoolkustoms Registered User Join Date: Feb 2010 Location: so cal Posts: 436	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans 6.2 that is a diesel right? PM me would like to buy whats left of the truck. __________________ big old burb in primer.lot of work to do.

02-22-2010, 01:44 PM	#70
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Front doors, rear tailgate and 86 grill are sold. This truck also has a very good front clip. The driver fender is almost perfect. There are a couple of small dents on the pass fender. One dent on the pass side of hood. No rust other than surface anywhere, including radiator support and inner fenders. Driver fender $60 Pass fender $40 Hood $40 front bumper $40 bumper guards $50 1986 Silverado 4 headlight trim rings $20 original 82 Silverado grill and headlight rings $50 $200 for complete clip including fenders, grill, bumper, radiator support and inner fenders diesel gauge cluster (no trim panel)Gear indicator needle/ assy is NOT broken. Cable fastener that attaches to steering column is missing $20 Tight tilt steering column works great, dimmer switch on floor, no slop in tilt assy, key included. $125 $400 for everything Whole truck for $500 with clear title!

02-22-2010, 01:57 PM	#71
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans pics Attached Images

02-22-2010, 02:00 PM	#72
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans There is also a nice "Carmine Red" velour dash mat $20 stainless steel rear air deflector right side plastic trim corner broken off $20 Attached Images

02-22-2010, 02:01 PM	#73
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans pic



Register or Log In To remove these advertisements.

02-22-2010, 02:02 PM	#74
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans more pics Attached Images

02-22-2010, 03:21 PM	#75
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: 1982 Chevrolet Suburban C2500 3/4 ton 2wd no engine or trans Wideside72, DO you still have the original grill and head light bezels from the Burb? If so, do you have any pics? __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

Register or Log In To remove these advertisements.