It may not make it to craigslist…. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 01-31-2009, 01:12 PM

Quote:

Originally Posted by see ten

I'd put a new top on the vette and roll it as is...just to see who I could piss off.

Ya know... I can't honestly say that I've ever seen a "beater" 'Vette at a show or just rollin' around... it's like there's some rule that they're not allowed to leave the garage without 3 coats of wax

**clay68c10** · 01-31-2009, 02:01 PM

The beater Vette idea is great! I saw a guy at a carshow that had a Cobra kit he had been driving for a while in the gelcoat and had no intentions of painting it for a while.

Andy4639 · 01-31-2009, 02:58 PM

You never saw my 1975 vett did Ya!
We had a 75, 454, convertable no power nothing except for the engine.
I never remember washing it and I wouldn't wax it. I hated that car. I never could get it to run right.
Traded it in on this one.
I liked this one...1982 crossfire fuel injected had 94000 miles on her when I sold it. The picture was when we had just drove 13hrs from the outerbanks to my parents house. That car was fun to drive.
I had a guy at a gas station to tell me that those little wheels on the trailer hadn't touched the ground in over 100 miles. Until we pulled into the station.

see ten · 01-31-2009, 05:09 PM

Now you've seen a beater vette!

msgross · 01-31-2009, 05:29 PM

i'd like to see the price on these as well... im not buying, just wondering..

67ChevyRedneck · 01-31-2009, 06:47 PM

See Ten, that baby looks great! Do you know the owner, or just random show pics?

Andy, my dad had an 82 or 83 firebird or TA, can't remember what it was, probably TA, but it had a cross fire intake in it. WEIRD looking intake/carb set up!

**Stocker** · 01-31-2009, 09:19 PM

Quote:

Originally Posted by see ten

Now you've seen a beater vette!

Nah.... just a sweet '57 that hasn't been painted yet!

see ten · 01-31-2009, 09:31 PM

No idea who it belonged to...Just some shots from Nashville Goodguys.

I kinda skimmed around a few sites for a value on the vette. I found some "project" cars of similar vintage for under 20K...Also found a couple non original engine driver shape cars for less then 30K. If it turns out to be a matching #s big block car....I'm sure the price will go up.

sameyrasmea72 · 01-31-2009, 09:58 PM

Quote:

Originally Posted by Andy4639

[B][COLOR="Red"]....We had a 75, 454, convertable no power nothing except for the engine.

Did you drop the big block in there or did the previous owner?

red71cheyenne · 01-31-2009, 11:42 PM

I just gotta say, I'm a fan of both of those. I'd pull the cap off that pickup and tow that vette right to my garage, kick the blazer out and put her in there.

knsmodels · 02-01-2009, 12:24 AM

that vette appears to have the correct 66 BB hood....

**LockDoc** · 02-03-2009, 11:13 AM

-
OK, finally an update. The owner's son finally called me and here is the skinny…They have decided to try and sell the truck first. He said they want me to put it on the Des Moines, IA craigslist for $8000 or best offer. I went up and took some more pictures of the truck yesterday. As far as the Corvette the son said his dad told him he doesn't have a title for it…??? I suppose that is why it wasn't confiscated (that, and he hid it) The pickup is in the owners dads name. Anyway, he said if they can sell the truck fairly quickly they will keep the Corvette. That is how it stands right now.

LockDoc

Stock72c10 · 02-03-2009, 11:29 AM

I don't know how prices are in Iowa, but I would say it would be worth every penny of $8,000 here.

wdrthird · 02-03-2009, 02:42 PM

Quote:

Originally Posted by see ten

I'd put a new top on the vette and roll it as is...just to see who I could piss off.

I like the way you think! lol I saw something at a car show in Kansas a few years back that would piss the 'Vette crowd off even more, it was a 70's Vette with a 351 under the hood and a Ford emblem on the back.

liftmeup · 02-03-2009, 04:18 PM

Ifhe wants a quick 8,000 I can give him that for the vette without the title as long as he signs a hold harmless if it turns out stolen so I don't wind up in jail. but I assume that won't happen.

**LockDoc** · 02-04-2009, 01:12 AM

Quote:

Originally Posted by liftmeup

Ifhe wants a quick 8,000 I can give him that for the vette without the title as long as he signs a hold harmless if it turns out stolen so I don't wind up in jail. but I assume that won't happen.

I know for a fact he has been offered 10k for it as it sits...

LockDoc

petey-pablo · 02-04-2009, 03:29 AM

Quote:

Originally Posted by see ten

Now you've seen a beater vette!

Beater Vette My @$$ That thing is still worth more than my truck and well both of my cars combined

I'd Drive that to the ground Nice ride

chip46wis · 02-04-2009, 04:45 AM

Nice rigs,both of them.I have a soft spot for the 63-67 vettes as a previous owner of 2 of them.I do know that the dash of that car I wish i had is not a 67 as they did not not have the passenger grab bar type dash.67 was flat --no hole to hang on to-------

01-31-2009, 02:01 PM	#52
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,988	Re: It may not make it to craigslist…. The beater Vette idea is great! I saw a guy at a carshow that had a Cobra kit he had been driving for a while in the gelcoat and had no intentions of painting it for a while. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

01-31-2009, 02:58 PM	#53
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: It may not make it to craigslist…. You never saw my 1975 vett did Ya! We had a 75, 454, convertable no power nothing except for the engine. I never remember washing it and I wouldn't wax it. I hated that car. I never could get it to run right. Traded it in on this one. I liked this one...1982 crossfire fuel injected had 94000 miles on her when I sold it. The picture was when we had just drove 13hrs from the outerbanks to my parents house. That car was fun to drive. I had a guy at a gas station to tell me that those little wheels on the trailer hadn't touched the ground in over 100 miles. Until we pulled into the station. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-31-2009, 05:09 PM	#54
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: It may not make it to craigslist…. Now you've seen a beater vette!

01-31-2009, 05:29 PM	#55
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: It may not make it to craigslist…. i'd like to see the price on these as well... im not buying, just wondering.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-31-2009, 06:47 PM	#56
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: It may not make it to craigslist…. See Ten, that baby looks great! Do you know the owner, or just random show pics? Andy, my dad had an 82 or 83 firebird or TA, can't remember what it was, probably TA, but it had a cross fire intake in it. WEIRD looking intake/carb set up! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-31-2009, 09:31 PM	#58
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: It may not make it to craigslist…. No idea who it belonged to...Just some shots from Nashville Goodguys. I kinda skimmed around a few sites for a value on the vette. I found some "project" cars of similar vintage for under 20K...Also found a couple non original engine driver shape cars for less then 30K. If it turns out to be a matching #s big block car....I'm sure the price will go up.

01-31-2009, 11:42 PM	#60
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: It may not make it to craigslist…. I just gotta say, I'm a fan of both of those. I'd pull the cap off that pickup and tow that vette right to my garage, kick the blazer out and put her in there. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

02-01-2009, 12:24 AM	#61
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	Re: It may not make it to craigslist…. that vette appears to have the correct 66 BB hood.... __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd

02-03-2009, 11:13 AM	#62
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,771	Re: It may not make it to craigslist…. - OK, finally an update. The owner's son finally called me and here is the skinny…They have decided to try and sell the truck first. He said they want me to put it on the Des Moines, IA craigslist for $8000 or best offer. I went up and took some more pictures of the truck yesterday. As far as the Corvette the son said his dad told him he doesn't have a title for it…??? I suppose that is why it wasn't confiscated (that, and he hid it) The pickup is in the owners dads name. Anyway, he said if they can sell the truck fairly quickly they will keep the Corvette. That is how it stands right now. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-03-2009, 11:29 AM	#63
Stock72c10 classic=of recognized value Join Date: Sep 2008 Location: Wichita, KS Posts: 317	Re: It may not make it to craigslist…. I don't know how prices are in Iowa, but I would say it would be worth every penny of $8,000 here.

02-03-2009, 04:18 PM	#65
liftmeup Registered User Join Date: Jan 2009 Location: Pittsburg PA Posts: 246	Re: It may not make it to craigslist…. Ifhe wants a quick 8,000 I can give him that for the vette without the title as long as he signs a hold harmless if it turns out stolen so I don't wind up in jail. but I assume that won't happen.

02-04-2009, 04:45 AM	#68
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Re: It may not make it to craigslist…. Nice rigs,both of them.I have a soft spot for the 63-67 vettes as a previous owner of 2 of them.I do know that the dash of that car I wish i had is not a 67 as they did not not have the passenger grab bar type dash.67 was flat --no hole to hang on to-------



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.